Bond Strength of a Silicone Soft Lining Material to Poly(methyl methacrylate) Resin Treated with Maleic Anhydride and its Terpolymers

This study investigated the effectiveness of surface treatment of Poly (methyl methacrylate) (PMMA) denture base resin on tensile bond strength between PMMA/silicone-based soft liner. A total of 25 specimens were fabricated and assigned into five groups (n = 5). The surfaces of PMMA were treated with maleic anhydride, maleic anhydride-styrene-vinyl-acetate, n-butylmaleate-styrene-vinyl-acetate, or n-pentamaleate-styrene-vinyl-acetate prior to Primo adhesive primer application and silicone liner placement. The Primo adhesive primer on applied group untreated dentuse base resin served as control. The tensile test was performed using a universal testing machine. Fractured surfaces were observed under Scanning Electron Microscopy (SEM) and spectroscopic interpretation of the interfaces was done by Fourier Transform Infrared (FTIR). Test results showed that surface treatment increased interfacial strength giving the highest value for n-butylmaleate-styrene-vinyl acetate treated group. SEM micrographs revealed that the specimens with n-butylmaleate-styrene-vinyl-acetate and n-penta maleate-styrene-vinyl-acetate terpolymers underwent cohesive failure. FTIR analysis indicated secondary interactions such as hydrogen bonding, possibly on acrylic resin surfaces, caused by the use of maleic anhydride and its terpolymers, and the adhesive.     

Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes

Mechanical properties (compressive strength, flexural strength, and toughness) of reactive powder concrete (RPC) produced with class-C fly ash (FA) and ground granulated blast furnace slag (GGBFS) were investigated under different curing conditions (standard, autoclave and steam curing) in this study. Test results indicate that, compressive strength of RPC increased considerably after steam and autoclaving compared to the standard curing. On the other hand, it was observed that steam and autoclave curing decreased the flexural strength and toughness. Increasing the GGBFS and/or FA content improved the toughness of RPC under all curing regimes considerably. Furthermore, SEM micrographs revealed dense microstructure of RPC.     

Investigation of the photoinitiation of methyl methacrylate polymerization by 2-morpholino acetonaphthone

2-Morpholino acetonaphthone (MPM) was synthesized as a cleavable photoinitiator and the structure of the photoinitiator was confirmed by spectral and elemental analysis. The photoinitiation capability of MPM was demonstrated by using methyl methacrylate and a formulation containing multifunctional monomers.     

Effects of flow induced orientation of ferromagnetic particles on relative magnetic permeability of injection molded composites

Composite samples consisting of ferromagnetic asymmetric particles incorporated into a polyolefin binder were injection molded using custom designed molds which produced preferential fiber orientations. The relative magnetic permeability values of the composites were measured as a function of the filler volume fraction, injection rate, gate diameter, temperature, aspect ratio of the fibers, and fiber orientation. Fiber orientation was affected by the molding conditions and controlled the relative magnetic permeability of the composites. The degree of fiber orientation was significantly affected by the size of the opening (gate) to the mold, or by the mold geometry going from an edge-gated cylindrical to a center-gated disk cavity. Relative permeability values of the composites were observed to increase when the fiber orientation and the applied field were parallel to one another. For instance, highly aligned composite samples exhibited up to 30% greater relative permeability values compared to those samples which exhibit fiber orientation distributions approaching a random distribution. To our knowledge this is the first study that provides data linking the fiber orientation distribution functions of ferromagnetic asymmetric particles to the relative magnetic permeability values of injection molded composites.     

Epicardial fat thickness is associated with impaired coronary flow reserve in hemodialysis patients

Cardiovascular disease (CVD) is the main cause of mortality in hemodialysis (HD) patients. Epicardial fat tissue (EFT) is a new risk factor in CVD. The aim of this study was to evaluate the association between EFT and coronary artery flow reserve (CFR), which is an early indicator of endothelial dysfunction in coronary vessels of HD patients. We performed a cross‐sectional study including 71 chronic HD patients and 65 age‐ and sex‐matched healthy controls. Epicardial fat tissue was significantly higher in HD patients when compared to healthy controls (6.53 ± 1.01 mm vs. 5.79 ± 1.06 mm, respectively, P < 0.001). On transthoracic Doppler echocardiography, CFR values were significantly lower in HD patients when compared to healthy controls (1.73 ± 0.11 vs. 2.32 ± 0.28, P < 0.001). Correlation analysis showed CFR values to be inversely correlated with EFT (r = ?0.287, P < 0.05). Multiple linear regression analysis was used to define independent determinants of EFT in HD patients. Artery flow reserve, age, body mass index and total cholesterol levels were independently correlated with EFT thickness. This study demonstrated that EFT was significantly higher among HD patients compared to healthy controls. In addition, this study was the first to demonstrate an inverse correlation between EFT and CFR in this patient population.     

The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures

In this study, pulverized fly ash (FA), pulverized granulated blast furnace slag (PS) and silica fume (SF) were quantitatively studied with the incorporation of Portland cement (PC). PC was replaced with FA or PS at specified ratios. Basalt and quartz powder were used as an aggregate in the mixtures. Three different curing methods (standard, autoclave and steam curing) were applied to the specimens. Test results indicate that high strength concrete can be obtained with high volume mineral admixtures. Compressive strength of these mixtures is over 170 MPa. It seems that these mixtures can also be used for reactive powder concrete (RPC) production with some modifications.     

A NIC with Impedance Scaling Properties Using Unity Gain Cells

A novel negative impedance converter (NIC) is proposed. This configuration is based on unity gain cells (a cascade of current and voltage followers with unity gains). The proposed circuit has wide band impedance scaling property, and it is suitable for practical implementation of realizing high-negative-valued passive components.     

Coexistence of life threatening chemotherapy related leukoencephalopathy, saggital sinus thrombosis and multiple organ failure in a child with acute lymphoblastic leukemia: an unusual case with clinical recovery

A nine-year old girl with T cell acute lymphoblastic leukemia (ALL) had acute severe neurologic complications at the end of the remission-induction chemotherapy course. Thirty-six hours following triple intrathecal (IT) therapy and intravenous (IV) administration of L-asparaginase (L-asp), tetraplegia developed and she became unconscious. She had bouts of hypertension and persistent tachycardia unresponsive to digitalis therapy. Magnetic resonance imaging (MRI) showed multiple brain white matter hyperintensities and filling defects in the saggital sinus, suggesting thrombosis. Over the 40 days, in addition to her neurologic compromise she also had transient diabetes mellitus, severe hyperlipidemia, hypoproteinemia and edema, liver and heart failure and staphylococcus aureus sepsis with prolonged bone marrow depression. Despite, coexistence of all these chemotherapy related complications, her neurologic functions and multiple organ failure improved gradually. After a 70 days' period of interruption, chemotherapy was resumed and continued without any further complications. Although, the etiology of her extensive sensitivity to some drugs remains unclear, we believe that it is important to document these unusual events in this child.     

A low-voltage CMOS switch with a novel clock boosting scheme

There is a strong demand for an input switch in switched-capacitor circuits, covering rail-to-rail signal swing when low power-supply voltages are used. This brief proposes a novel clock-boosting scheme. The generated clock voltages of this new circuit are applied to a regular CMOS transmission gate to implement a simple and robust sampling switch when the supply voltages are very low. In this new approach, during the sampling phase, the gate-voltage of an nMOS switch is boosted up to V/sub dd/+k/spl middot/V/sub dd/, and the gate voltage of a pMOS switch is lowered to V/sub gnd/-k/spl middot/V/sub dd/, where k can be made programmable, and is usually smaller than 1. This allows sampling of the full signal swing, even when supply voltages are lower than |V/sub th/,p|+V/sub th/,n without applying extreme stress to the gate oxide of a transistor.     

An unusual foreign body swallowed by a newborn causing respiratory distress

Swallowed and inhaled foreign bodies in children under 5 years of age are common and considered serious causes of morbidity and mortality. However such occurrence is uncommon in infants and newborns. The current report deals with a strange object lodged in the oesophagus of a 20-day-old male newborn.