Mining fleet management systems: a review of models and algorithms

The objective of this paper is to review and document the mine fleet management systems’ models and algorithms. The purpose is to understand the algorithms behind the fleet management systems and the proposed academic solutions in this area to identify any gaps in the current literature and to open up opportunities to establish research questions that need to be addressed in an integrated simulation and optimisation operational planning research framework. In this paper, we review industrial fleet management systems and the main academic algorithms behind such systems. The fleet management systems are divided into three subsequently related problems to review: shortest path, production optimisation and real-time dispatching. Finally, the limitations of current algorithms for fleet management systems are documented in terms of mining practice feasibility and optimality of the solution on large-scale problems. The results of this literature review enable us to evaluate the logical links between major components of an integrated simulation and optimisation operational planning framework with current theory of fleet management systems.     

Spatial prediction of landslide-susceptible zones in El-Qaá area,Egypt, using an integrated approach based on GIS statistical analysis

Bulletin of Engineering Geology and the Environment - The spatial prediction of landslide susceptibility locations is a crucial task to support risk management and development plans in mountainous...     

A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Extraction optimisation,antioxidant activity and inhibition on α-amylase and pancreatic lipase of polyphenols from the seeds of Syzygium cumini

The objectives of this study were to determine the optimal extraction conditions of polyphenols from Syzygium cumini seeds by response surface methodology and investigate their antioxidant activity and inhibition on α-amylase and pancreatic lipase. As results, the optimal extraction conditions in the ultrasonic extraction process which maximised total polyphenols content, minimised the IC₅₀ values of α-amylase and pancreatic lipase were determined as follows: extraction time 60 min, ethanol concentration 63% and solvent/solid ratio 44 mL g⁻¹. The main phenolic compounds in partially purified fraction of Syzygium cumini seeds were catechin, epicatechin, kaempferol, gallic, 5-caffeoylquinic, caffeic and ferulic acids. In addition, the partially purified fraction inhibited 87.66 ± 5.55 and 86.61 ± 3.15% of α-amylase and pancreatic lipase, respectively. The results suggested that Syzygium cumini seeds could be explored as a natural antioxidant and could be used as a source of highly antidiabetic and anti-obesity bioactive compounds.     

Pressure-driven reverse-phase liquid chromatography separations in ordered nonporous pillar array columns

Building upon the micromachined column idea proposed by the group of Regnier in 1998, we report on the first high-resolution reversed-phase separations in micromachined pillar array columns under pressure-driven LC conditions. A three component mixture could be separated in 3 s using arrays of nonporous silicon pillars with a diameter of approximately 4.3 microm and an external porosity of 55%. Under slightly retained component conditions (retention factor k' = 0.65-1.2), plate heights of about H = 4 microm were obtained at a mobile phase velocity around u = 0.5 mm/s. In reduced terms, such plate heights are as low as hmin = 1. Also, since the flow resistance of the column is much smaller than in a packed column (mainly because of the higher external porosity of the pillar array), the separation impedance of the array was as small as E = 150, i.e., of the same order as the best currently existing monolithic columns. At pH = 3, yielding very low retention factors (k' = 0.13 and 0.23), plate heights as low as H = 2 microm were realized, yielding a separation of the three component mixture with an efficiency of N = 4000-5000 plates over a column length of 1 cm. At higher retention factors, significantly larger plate heights were obtained. More experimental work is needed to investigate this more in depth. The study is completed with a discussion of the performance limits of the pillar array column concept in the frame of the current state-of-the-art in microfabrication precision.     

Investigation on the resistance spot-welded austenitic/ferritic stainless steel

In this work, the effect of weld current on joining capability of austenitic stainless steel (AISI 304) and ferritic stainless steel (AISI 430) sheets with application of resistance spot welding process was investigated. Macrostructure, microstructure, microhardness, tensile shear strength, and failure mode of welded materials were evaluated for different weld currents. The values of weld current were 2.5, 3.75, and 5 kA. It was found that when the weld current increased, the nugget size and the weld strength were increased. Two distinct failure modes including interfacial and pullout were observed during tensile shear test. Finally, an adequate weld current was obtained.     

Experimental investigation of liquid–liquid flow in an inclined pipe using dimensionless numbers

Two-phase flow is a common phenomenon in the energy industry, where flow patterns significantly affect heat transfer and pressure drop in different systems. However, there is no unique or comparable flow map because of its dependency on dimensional parameters. Therefore, an analysis using dimensionless numbers makes the results comprehensive. To do so, a series of liquid–liquid flow experiments (1296 experiments) were conducted in a transparent pipe at the different velocities of the phases. The flow patterns were captured using a high-speed camera. The experiments were performed at eight different inclinations within the range of −20 to +20 degrees. Six flow patterns are observed at different inclinations; stratified flow with mixing at the interface (STMI), dispersion of water in oil (Dw/o), dispersion of oil in water (Do/w), dual continuous (DC), slug, and wavy stratified (WST), where the first five flow patterns are presented in the upward flow and the two last flow patterns disappear in some of the downward flow. The pattern of boundaries for each flow pattern in the upward flow shows dependency on inclination, while in the downward flow condition, a rather general format can be applied to most of the patterns. The analysis illustrates that gravity and buoyancy forces are the dominating forces in the system compared to other forces, such as viscous, inertia, and interfacial tension, which are due to the inclination of the pipe.