Synthesis,characterization, and thermal aging behavior of HCl‐doped polyaniline/TRGO nanocomposites

In this article polyaniline (PANI) nanocomposites containing thermally reduced graphene oxide (TRGO) were synthesized and characterized before and after thermal aging. The nanocomposites were prepared through in situ oxidative polymerization of aniline in the presence of TRGO nanoplatelets. FTIR and Raman spectroscopies, XRD, FESEM, and electrical conductivity measurements were used to characterize synthesized materials. PANI/TRGO nanocomposites showed considerably higher electrical conductivity when compared to pure PANI, which was associated with the higher electrical conductivity of TRGO and increased crystallinity of PANI in the presence of TRGO. Pure PANI and PANI/TRGO nanocomposites were thermally aged at 70, 80, 90, and 100 °C. The results showed that the characteristic time of thermal aging process is higher for PANI/TRGO nanocomposites and increases with TRGO loading, which indicates better stability of conductivity during thermal aging process. On the other hand, the characteristic time of thermal aging reduced with aging temperature and a fast decrease was observed from 80 to 90 °C. Improved resistance over thermal aging can be attributed to the barrier effect of TRGO nanoplatelets to the dopant molecules, which retards conductivity degradation in the thermal aging process. Furthermore, TRGO increases PANI crystallinity and it can also prevent crystallinity reduction during thermal aging process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44635.     

Fabricating and robust artificial neural network modeling nanoscale polyurethane fiber using electrospinning method

With regard to the fact that currently there is no comprehensive method to predict diameter of polyurethane/solvent fiber from electrospinning, in this study, diameter prediction of polyurethane/solvent fiber was conducted using neural networks and an error of 166 nm was observed. This error shows that artificial neural networks (ANNs) can predict diameter of electrospinning polyurethane fibers well. Then, considering weak repeatability nature of electrospinning in fabricating fibers with desired diameter, least mean square is used to improve stability of neural network model that shows an error of 113 nm, which represented better results compared to common ANN. To investigate the effect of each one of parameters affecting fiber diameter, sensitivity analysis was conducted. Along with this predicting model, sensitivity analysis can be used to reduce parameters space before conducting future studies. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45116.     

Influence of nanoclay on urea–glyoxalated lignin–formaldehyde resins for wood adhesive

In this research, the influence of nanoclay on urea–glyoxalated lignin–formaldehyde (GLUF) resin properties has been investigated. To prepare the GLUF resin, glyoxalated soda baggase lignin (15 wt%) was added as an alternative for the second urea during the UF resin synthesis. The prepared GLUF resin was mixed with the 0.5%, 1%, and 1.5% nanoclay by mechanically stirring for 5 min at room temperature. The physicochemical properties of the prepared resins were measured according to standard methods. Then the resins were used in particleboard production and the physical and mechanical properties of the manufactured panels were determined. Finally, from the results obtained, the best prepared resin was selected and its properties were analyzed by differential scanning calorimetry (DSC), Fourier transform infrared spectrometry (FTIR), and X-ray diffractometry (XRD). Generally the results indicated that the addition of sodium-montmorillonite (NaMMT) up to 1.5% appears to improve the performance of GLUF resins in particleboards. The results also showed that nanoclays improved mechanical strength (modulus of elasticity (MOE), Modulus of Rupture (MOR), and internal bond (IB) strength) of the panels bonded with GLUF resins. The panels containing GLUF resin and nanoclay yielded lower formaldehyde emission as well as water absorption content than those made from the neat GLUF resins. XRD characterization indicated that NaMMT only intercalated when mixed with GLUF resin. Based on DSC results, the addition of NaMMT could accelerate the curing of GLUF resins. The enthalpy of the cure reaction (ΔH) of GLUF resin containing NaMMT was increased compared with neat GLUF resin. Also the results of FTIR analysis indicated that addition of NaMMT change the GLUF resins structures.     

The effect of soda bagasse lignin modified by ionic liquids on properties of the urea–formaldehyde resin as a wood adhesive

The aim of this research was to investigate the influence of lignin modified by ionic liquids on physical and mechanical properties of plywood panels bonded with the urea–formaldehyde (UF) resin. For this purpose, soda bagasse lignin was modified by the 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) ionic liquid and then the various contents of unmodified and modified lignins (10, 15, and 20%) were added at pH=7 instead of second urea during the UF resin synthesis. The physicochemical properties of the prepared resins as well as the water absorption, shear strength, and formaldehyde emission of the plywood panels made with these adhesives were measured according to standard methods. According to Fourier Transform Infrared (FTIR) Spectrometry, by treatment of lignin, the C=O, C–C, and C–H bonds decrease while the content of the C–N bond dramatically increases. Based on the finding of this research, the performance of soda bagasse lignin in UF resins dramatically improves by modification by ILs; as the resins with modified lignin yielded lower formaldehyde emission and water absorption when compared to those made from unmodified lignin and commercial UF adhesives, respectively. The shear strength as well as wood failure percentages are lower for the panels produced with modified lignin than for the panels produced with UF resins alone.     

Hydrothermal synthesis of Co3O4 nanosheets and its application in photoelectrochemical water splitting

In this study, Co₃O₄ nanosheets were synthesized through hydrothermal method using cobalt nitrate hexahydrate. X-ray diffraction, diffuse reflectance spectra, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and field emission scanning electron microscopy were applied to investigate the properties of as-synthesized samples. Ultimately, the electrochemical and photoelectrochemical properties were evaluated by Mott–Schottky analysis and measuring photoconversion efficiency of Co₃O₄ nanosheets. The results indicated that Co₃O₄ nanosheets exhibited a maximum efficiency of 0.92% for water electrolysis under simulated 1.5 global sunlight air mass, which further suggests the excellent potential of Co₃O₄ nanosheets for application in hydrogen generation through photocatalytic water splitting.     

Characterization of mechanically sheared edges of dual phase steels

In recent years advanced high strength steels (AHSS) received increased interest for light structures with improved performance, but they are often sensitive to edge cracking during sheet metal forming. In this study mechanically sheared edges were characterized for three dual phase steels (DP600, DP780 and DP980), sheared with three die clearances (5%t, 10%t, 15%t) and along rolling and transverse directions. Microstructures of the materials were provided first, and then the sheared edges were examined by optical microscopy and scanning electron microscopy that reveal the morphology and random feature of the sheared edges. A factorial analysis was performed to reveal the general trends of the processing parameters on four edge zones. A new strain measurement method was used for characterizing strain distribution in the sheared region, which shows the peak strain to be higher than 3. The strain quickly decreases from sheared edge to interior, leaving a shear-affected zone of about 500 μm or 31% of the thickness. The fracture processes and involved mechanisms were discussed.     

Eutectic Morphology in Alloy Pb – 3.2% Cd – 0.08% Sr for Battery Grids

Metal Science and Heat Treatment - Ageing of supersaturated solid solution in Pb – 3.2% Cd – 0.08% Sr alloy is studied at 20 and 80°C by measuring hardness, and light and scanning...     

Control of Superelastic Behavior of NiTi Wires Aided by Thermomechanical Treatment with Reference to Three-Point Bending

The aim of this study is to investigate the effect of thermomechanical treatment on the superelastic behavior of a Ti-50.5 at.%Ni wire in terms of loading/unloading plateau, mechanical hysteresis, and permanent set to optimize these parameters for orthodontic applications. A new three-point bending fixture, oral cavity configuration three-point bending (OCTPB) test, was utilized to determine the superelastic property in clinical condition, and therefore, the tests were carried out at 37 °C. The results indicate that the thermomechanical treatment is crucial for thermal transformation and mechanically induced transformation characteristics of the wire. Annealing of thermomechanically treated specimens at 300 and 400 °C for 1/2 and 1 h leads to good superelasticity for orthodontic applications. However, the best superelasticity at body temperature is obtained after annealing at 300 °C for 1/2 h with regard to low and constant unloading force and minimum permanent set.     

Weld defect formation in FSWed coppers

This work was undertaken to explore the formation of weld defects in FSWed copper metals via both numerical and experimental approaches. The 4 mm-thick copper sheets were friction stir welded at a tool rotational speed of 710 rpm and tool translational speed of 40 mm/min. Microstructural evaluations were performed on the welded specimens. Also a 3D arbitrary Lagrangian Eulerian numerical model was developed to obtain temperature and material velocity profiles. To this aim, DEFORM-3D was implemented for developing the numerical simulation. Numerical results for temperature values showed good agreement with the recorded experimental data. They also suggest that on the advancing side (AS) of the trailing side, the pin velocity has the minimum amount (zero), and this is the main reason for the formation of tunneling cavity. Experimental results show that a force is created between the reminder of material at the joint and the rim of AS. This force causes a prong of surface material from the AS rim to penetrate into lower parts of weld. It seems that the inadequate pressure (low values of the plunge depth), inadequate surface materials, and the trapped air are the main causes for the formation of the weld defects.