On the performance of different capability indices under normal and non-normal distributions

In this article, we have examined the performance of some useful capability indices using normal and non-normal distributions. The confidence intervals are calculated and mean coverage rates are observed for different capability indices. The effects of symmetry and kurtosis of parent distributions are examined on the mean coverage rates of different capability indices. Moreover, we have investigated the robustness (of confidence interval) using the median and percentile-based indices. We have considered the well-known distributions including normal, gamma, t, Weibull, and chi-squared. For these process scenarios, we have observed that some indices resist disturbance only in symmetry of the parent distribution, some resist the disturbance in symmetry and kurtosis of the distribution, and some indices don’t resist against either type of disturbance.     

Adaptive sliding mode control of chaotic dynamical systems with application to synchronization

We address the problem of control and synchronization of a class of uncertain chaotic systems. Our approach follows techniques of sliding mode control and adaptive estimation law. The adaptive algorithm is constructed based on the sliding mode control to ensure perfect tracking and synchronization in presence of system uncertainty and external disturbance. Stability of the closed-loop system is proved using Lyapunov stability theory. Our theoretical findings are supported by simulation results.     

Task migration in three-dimensional meshes

As a result of the emerging use of mesh-based multicomputers (and recently mesh-based multiprocessor systems-on-chip), issues related to processor management have attracted much attention. In a mesh-based multiprocessor, after repeated submesh allocations and de-allocations, the system network may be fragmented, i.e. there might be unallocated nodes in the network. As a result, in a system with contiguous processor allocation, no new tasks can start running due to the lack of enough free adjacent processors to form a suitable submesh. Although there might be enough free processors available, they remain idle until the allocator can find a set of adjacent free nodes forming a submesh to be used for the new task. This can lead to low system performance. Task migration was introduced as a solution to this problem through migration of tasks running on some submeshes to other free areas in order to reduce fragmentation by chaining the newly freed areas and disengaging nodes to form larger submeshes. In this paper, we propose a novel structured and formulated way to code task migration, which is helpful for congestion detection in different steps of task migration algorithms. Moreover, considering the fact that the 3D mesh-based multicomputers are now very popular, a new task migration algorithm in 3D meshes is proposed. We also address the special case of the 2D migration in a 3D mesh multicomputer.     

Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA

In this study, Artificial Neural Network (ANN) and Simulated Annealing (SA) techniques were integrated labeled as integrated ANN-SA to estimate optimal process parameters in abrasive waterjet (AWJ) machining operation. The considered process parameters include traverse speed, waterjet pressure, standoff distance, abrasive grit size and abrasive flow rate. The quality of the cutting of machined-material is assessed by looking to the roughness average value (R_a). The optimal values of the process parameters are targeted for giving a minimum value of R_a. It was evidence that integrated ANN-SA is capable of giving much lower value of R_a at the recommended optimal process parameters compared to the result of experimental and ANN single-based modeling. The number of iterations for the optimal solutions is also decreased compared to the result of SA single-based optimization.     

An efficient optimal algorithm for the quantity discount problem in material requirement planning

An optimal algorithm based on branch-and-bound approach is presented in this paper to determine lot sizes for a single item in material requirement planning environments with deterministic time-phased demand and constant ordering cost with zero lead time, where all-units discounts are available from vendors and backlog is not permitted. On the basis of the proven properties of optimal order policy, a tree-search procedure is presented to construct the sequence of optimal orders. Some useful fathom rules have been proven, which make the algorithm very efficient. To compare the performance of this algorithm with the other existing optimal algorithms, an experimental design with various environments has been developed. Experimental results show that the performance of our optimal algorithm is much better than the performance of other existing optimal algorithms. Considering computational time as the performance measure, this algorithm is considered the best among the existing optimal algorithms for real problems with large dimensions (i.e. large number of periods and discount levels).     

Stability domains of the delay and PID coefficients for general time-delay systems

Time delays are encountered in many physical systems, and they usually threaten the stability and performance of closed-loop systems. The problem of determining all stabilising proportional-integral-derivative (PID) controllers for systems with perturbed delays is less investigated in the literature. In this study, the Rekasius substitution is employed to transform the system parameters to a new space. Then, the singular frequency (SF) method is revised for the Rekasius transformed system. A novel technique is presented to compute the ranges of time delay for which stable PID controller exists. This stability range cannot be readily computed from the previous methods. Finally, it is shown that similar to the original SF method, finite numbers of singular frequencies are sufficient to compute the stable regions in the space of time delay and controller coefficients.     

Structural,optical and electrical properties of Cu<Subscript>2</Subscript>Zn<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>SnS<Subscript>4</Subscript> quinternary alloys nanostructures deposited on porous silicon

The Cu₂Zn_1?xCd_xSnS₄ quinternary alloy nanostructures with different Cd contents were grown using spin coating technique on porous silicon (63.93 %) substrate. The structural properties of Cu₂Zn_1?xCd_xSnS₄/PS were investigated by X-ray diffraction and field emission-scanning electron microscope (FE-SEM). The optical properties studied through photoluminescence technique, indicated that the band gap is shifted as Cd content increases from 1.84 eV at x = 0 to 1.76 eV at x = 1. The electrical characterization of the Ag/n-PS/Cu₂Zn_1?xCd_xSnS₄/Ag diode through current to voltage (I–V) characterization shows the highest photo-response of (value if any) at Cu₂Zn_0.4Cd_0.6SnS₄ composition.     

Extracting 3D information on bone remodeling in the proximity of titanium implants in SRμCT image volumes

Bone-implant integration is measured in several ways. Traditionally and routinely, 2D histological sections of samples, containing bone and the biomaterial, are stained and analyzed using a light microscope. Such histological section provides detailed cellular information about the bone regeneration in the proximity of the implant. However, this information reflects the integration in only a very small fraction, a 10 μm thick slice, of the sample. In this study, we show that feature values quantified on 2D sections are highly dependent on the orientation and the placement of the section, suggesting that a 3D analysis of the whole sample is of importance for a more complete judgment of the bone structure in the proximity of the implant. We propose features describing the 3D data by extending the features traditionally used for 2D-analysis. We present a method for extracting these features from 3D image data and we measure them on five 3D SRμCT image volumes.We also simulate cuts through the image volume positioned at all possible section positions. These simulations show that the measurement variations due to the orientation of the section around the center line of the implant are about 30%.     

Agent-based multimedia presentation and adaptation service

In this paper, we aim to provide adaptive multimedia services especially video ones to end-users in an efficient and secure manner. Users moving outside the office should be able to maintain an office-like environment at their current locations. First, the agents within our proposed architecture negotiate the different communication and interaction factors autonomously and dynamically. Moreover, we needed to develop a user agent in addition to service and system agents that could negotiate the requirements and capabilities at run time to furnish best possible service results. Thus we designed and integrated a video indexing and key framing service within our overall agent-based architecture. We integrated this video indexing and content-based analysis service to adapt the video content according to run time conditions. We designed a video XML schema to validate the media content out of this multimedia service according to specific requirements and features, as we will describe later.

Behavior of Composite Unreinforced Masonry–Fiber-Reinforced Polymer Wall Assemblages Under In-Plane Loading

An experimental investigation was conducted to study the in-plane behavior of face shell mortar bedded unreinforced masonry (URM) wall assemblages retrofitted with fiber-reinforced polymer (FRP) laminates. Forty-two URM assemblages were tested under different stress conditions present in masonry shear and infill walls. Tests included prisms loaded in compression with different bed joint orientation (on/off-axis compression), diagonal tension specimens, and specimens loaded under joint shear. The behavior of each specimen type is discussed with emphasis on modes of failure, strength and deformation characteristics. Results showed that the application of FRP laminates on URM has a great influence on strength, postpeak behavior, as well as altering failure modes and maintaining the specimen integrity. The retrofitted specimens reached compressive strength of 1.62–5.64 times that of their unretrofitted counterparts, depending on the bed joint orientation, and joint shear strength increased by eightfold.