Improving the corrosion and tribocorrosion resistance of Ni–Co nanocrystalline coatings in NaOH solution

Ni–Co nanocystalline coatings were electrodeposited from a modified Watts bath. Increasing the deposition current density had no significant effect on structure, corrosion and tribocorrosion behavior of the coatings. Adding saccharin into the bath reduced the grain size, increased the hardness, changed the texture component from (2 0 0) to (1 1 1), smoothed the surface morphology, increased the corrosion resistance and improved the tribocorrosion behavior of coating. Presence of sodium lauryl sulfate in the bath increased the corrosion resistance of coating by producing a more compact surface morphology. However, the coating showed low tribocorrosion resistance, probably due to its lower hardness.     

Application of Compressible Volume of Fluid Model in Simulating the Impact and Solidification of Hollow Spherical ZrO<Subscript>2</Subscript> Droplet on a Surface

Applications of hollow spherical particles in thermal spraying process have been developed in recent years, accompanied by attempts in the form of experimental and numerical studies to better understand the process of impact of a hollow droplet on a surface. During such process, volume and density of the trapped gas inside droplet change. The numerical models should be able to simulate such changes and their consequent effects. The aim of this study is to numerically simulate the impact of a hollow ZrO₂ droplet on a flat surface using the volume of fluid technique for compressible flows. An open-source, finite-volume-based CFD code was used to perform the simulations, where appropriate subprograms were added to handle the studied cases. Simulation results were compared with the available experimental data. Results showed that at high impact velocities (U ₀ > 100 m/s), the compression of trapped gas inside droplet played a significant role in the impact dynamics. In such velocities, the droplet splashed explosively. Compressibility effects result in a more porous splat, compared to the corresponding incompressible model. Moreover, the compressible model predicted a higher spread factor than the incompressible model, due to planetary structure of the splat.     

Numerical modeling of thawing in frozen rocks of underground mines caused by backfilling

The thawing effect due to backfilling in permafrost mining rocks is investigated. The heat transfer equation in rock and backfill is obtained by considering the effect of phase change, heat generation due to cement hydration and temperature dependent material properties. The governing equations are solved using a finite volume numerical method and the phase change phenomenon is modeled based on the manipulation of specific heat, thermal conductivity and density of rock and backfill. The harmonic mean method was employed to handle the change of thermal properties. The effects of different influential parameters such as cement content of backfill, water content of rock and backfill, thermal conductivity of rock and filling material, and the number of adjacent stopes are investigated. Eventually, using the resulting temperature and phase field, a new parameter regarded as the radius of thawing, is introduced.     

Investigation of well test behavior in gas condensate reservoir using single-phase pseudo-pressure function

Gas condensate reservoirs present complicated thermodynamic behavior when pressure falls below the dew point pressure, due to fluid dropout and change in the fluid composition. Condensate blockage in the near wellbore region reduces the well deliverability. Mixture composition change in the reservoir makes the interpretation of well tests in gas condensate reservoirs a serious challenge. In this study, at first the capillary number effect and Non-Darcy Flow on compositional simulation of gas condensate reservoirs were investigated and then well test analysis was carried out. The main objective of this work was to examine gas condensate well test analysis using single-phase gas pseudo-pressure and radial composite model assuming capillary number effect and Non-Darcy Flow. For this purpose some fluid samples were selected and results compared. Results indicate that estimation of reservoir properties below the dew point is in good agreement with actual input, particularly for lean fluid samples.     

Biosorption of thorium from aqueous solution by Ca-pretreated brown algae Cystoseira indica

The potential use of a biosorbent, Cystoseira indica, obtained from the Persian Gulf was investigated for the removal of Th (IV) ions from aqueous solutions by considering equilibrium, kinetic and thermodynamic aspects. The FT-IR spectra of unloaded and Th-loaded biomass indicated various functionalities on the biomass surface including hydroxyl, amide and carboxyl groups, which are responsible for the binding of thorium ions. Th (IV) uptake by C. indica was pH dependent. An increase in biosorbent dosage up to 1 g/L caused an increase in the Th (IV) percentage removal. Biosorption process at all studied initial Th (IV) ion concentrations follows the pseudo-second order kinetic model. The biosorption data could be well described by Redlich-Peterson isotherm in comparison to Langmuir and Freundlich isotherms. The maximum sorption capacity of Th (IV) by Langmuir isotherm was estimated to be 169.49 mg/g at 45 °C with pH of 3. The thermodynamic parameters indicated the biosorption of Th on the biomass was a feasible, spontaneous and endothermic process. Th sorption capacity remained unaffected or slightly affected (<10% inhibition) in the presence of several interfering ions such as uranium (VI), nickel (II) and copper (II). The reusability of the biomass was also determined after five sorption-desorption cycles.     

The adsorption of malachite green (MG) as a cationic dye onto functionalized multi walled carbon nanotubes

Synthetic dyes are widely used by several industries to color their products. The discharge of colored wastewater into the hydrosphere causes serious environmental problems. We used functionalized multi wall carbon nanotubes as an adsorbent for the adsorption of cationic dye, malachite green, from aqueous solution. Based on information provided by the Iranian Research Institute of Petroleum Industry, carbon nanotubes are produced using a chemical vapor deposition (CVD) technique. These as-received MWCNTs were functionalized by acid treatment. The remaining dye concentration was read by UV-visible absorption spectroscopy at maximum adsorption wavelength. The effect of different operational parameters such as contact time, pH of solution, adsorbent dose and initial dye concentration were studied. The results showed that by increasing of contact time, pH and adsorbent dose the removal of dye increased, but by increasing initial dye concentration, the removal efficiency decreased. Adsorption isotherms and kinetics behavior of f-MWCNTs for removal of malachite green was analyzed, and fitted to various existing models. The experimental data were well correlated with the Langmuir isotherm with a maximum adsorption capacity (q _m ) and regression coefficient (R²) of 142.85 mg/g and 0.997, respectively. The results of this study indicate that functionalized multi wall carbon nanotubes can be used as an effective adsorbent for the removal of dyes.