菜地土壤评价中参评因素的选定与分级指标的划分

菜地选片规划应通过土壤详查和评价工作,选出最适地区,才能经济有效、持续发展。土壤评价中参评因素的选定与分级指标的划分是工作的核心。应选取对蔬菜的生长发育和生产力具有重大影响的、稳定性较高的限制因素,并以土壤属性为主,结合环境条件,因地制宜选定。参评因素的分级应尽量采用定量指标,为分等定级提出定量依据,其主要级差应尽量利用有生物学意义的临界指标。在目前全国无统一规定下,试图面向全国选定参评因素及划分为五等六级的分级指标。     

Mining Frequent Patterns without Candidate Generation: A Frequent-Pattern Tree Approach

Mining frequent patterns in transaction databases, time-series databases, and many other kinds of databases has been studied popularly in data mining research. Most of the previous studies adopt an Apriori-like candidate set generation-and-test approach. However, candidate set generation is still costly, especially when there exist a large number of patterns and/or long patterns.In this study, we propose a novel frequent-pattern tree (FP-tree) structure, which is an extended prefix-tree structure for storing compressed, crucial information about frequent patterns, and develop an efficient FP-tree-based mining method, FP-growth, for mining the complete set of frequent patterns by pattern fragment growth. Efficiency of mining is achieved with three techniques: (1) a large database is compressed into a condensed, smaller data structure, FP-tree which avoids costly, repeated database scans, (2) our FP-tree-based mining adopts a pattern-fragment growth method to avoid the costly generation of a large number of candidate sets, and (3) a partitioning-based, divide-and-conquer method is used to decompose the mining task into a set of smaller tasks for mining confined patterns in conditional databases, which dramatically reduces the search space. Our performance study shows that the FP-growth method is efficient and scalable for mining both long and short frequent patterns, and is about an order of magnitude faster than the Apriori algorithm and also faster than some recently reported new frequent-pattern mining methods.     

Numerical analysis of welding residual stress using heat source models for the multi-pass weldment

Numerical prediction of welding-induced residual stresses using the finite element method has been a common practice in the development or refinement of welded product designs. Various researchers have studied several thermal models associated with the welding process. Among these thermal models, ramp heat input and double-ellipsoid moving source have been investigated. These heat-source models predict the temperature fields and history with or without accuracy. However, these models can predict the thermal characteristics of the welding process that influence the formation of the inherent plastic strains, which ultimately determines the final state of residual stresses in the weldment. The magnitude and distribution of residual stresses are compared. Although the two models predict similar magnitude of the longitudinal stress, the double-ellipsoid moving source model predicts wider tensile stress zones than the other one. And, both the ramp heating and moving source models predict the stress results in reasonable agreement with the experimental data.     

基于疲劳理论的汽车空气悬架结构件的弯曲强度计算

针对某种型号客车的空气悬架，应用ANSYS软件对弹簧支架进行了有限元分析，计算了弹簧支架的应力、变形特性，在此基础上计算了弹簧支架的疲劳强度。     

The use of generalised deformation boundaries for the analysis of axisymmetric extrusion through curved dies

A generalised kinematically admissible velocity field is derived for axisymmetric extrusion through curved dies by employing rigid-plastic boundaries expressed in terms of arbitrarily chosen continuous functions. The corresponding upper-bound extrusion pressure is related directly to boundary functions for the plastically deforming region when the die shape, lubrication condition and material characteristics of the billet are given. The proposed method of analysis makes it possible to predict the deformation pattern as well as extrusion pressure. In computation a third-order polynomial is chosen for the die boundary and the bounding function for the plastic region is chosen to be a fourth-order polynomial. The workhardening effect is considered in the formulation. The plastic boundaries as well as stream lines are affected by various process parameters. The theory predicts the relatively faster axial flow at the center than near the die boundary for greater friction factor even with the same die shape. The effects of area reduction and die length are also discussed in relation to extrusion pressure and deformation. Experiments are carried out for steel billets at room temperature. Deformation patterns are measured for several area reductions by the photoetching technique and the extrusion pressure is measured using a load-cell. The predicted extrusion pressure is in excellent agreement with the value computed by the finite element method. The deformation patterns agree well with the experimental observation.     

中低压直流配电系统的分散式统一控制策略

中低压直流配电系统由中压直流母线、低压直流母线、直流变压器等组成,具有多电压等级、多直流母线、多变换器的特点,系统的运行方式与协调控制策略更加复杂。文中以中低压直流配电系统为研究对象,提出了一种基于直流母线电压信号的分散式统一控制策略。直流母线上的光伏发电单元、储能单元、燃料电池单元均采用分散式控制策略,根据直流母线电压调整各自的工作模式。直流变压器采用统一控制策略,集功率控制、中压与低压直流母线电压调节功能于一身,直流变压器根据中压与低压直流母线电压偏差的标幺值,自动调节传输功率的大小与方向,从而实现系统的全局功率均衡。最后,在MATLAB/Simulink中搭建了中低压直流配电系统的仿真模型,并对多种运行状态和场景进行了仿真分析,验证了所提控制策略的有效性。     

数字称重式全自动包装机

介绍了一种新型全自动包装机的设计。该设计采用三台步进电机分别实现落料、制袋、切断的独立动作。为了准确控制步进电机的运动 ,加入了自动检测和控制电路     

金刚石砂轮电解修整磨削液的防锈性能研究

分析几种防锈添加剂对金属结合剂金刚石砂轮电解修整磨削液防锈性能的影M向，通过试验确定了几种防锈添加剂的合理含量，以及不同氯化钠电解液浓度所对应的各类添加剂含量。论文确定了金刚石砂轮电解修整磨削液的基本组成，并进行了电解修整磨削液的电解性能试验。     

面向复杂曲面的机器人砂带磨抛路径规划及后处理研究

针对机器人砂带磨抛复杂曲面叶片问题,对叶片内外型面和进排气边的磨抛路径规划及后处理技术进行了研究,对复杂曲面叶片的机器人砂带磨抛路径规划的计算效率及加工效率进行了分析,提出了一种将基于等残留高度法的笛卡尔空间计算的磨抛行距转化为参数域空间的磨抛行距的方法,并将机器人砂带磨抛复杂曲面叶片接触轮的中心坐标位置、支撑轴矢量以及轴线矢量数据后处理为机器人的位姿信息,利用机器人砂带磨抛系统装备实验平台对复杂曲面叶片进行了实际的加工实验。研究结果表明:所提出的刀路规划和后处理技术能够有效地解决机器人砂带磨抛复杂曲面叶片的问题,具有加工路径总长短以及路径条数少的特点,计算简单、加工效率高、加工表面质量好。     

铰链四杆直线机构综合的新方法

给出一种综合连杆曲线具有四个无限接近点（鲍尔点）直线的四杆机构的新方法，用该方法综合铰链四杆机构可事先给定钦逼近直线上的点、直线方向以及机架的位置，而且在每种给定条件下，都可以得到无穷多种机构供设计者选择。