Dielectric Properties of Basaltic Glass and Glass-Ceramics: Modeling and Applications as Insulators and Semiconductors

Silicon - Sinai basaltic rocks were melted as glass and casted into disc- and rode-shapes and subjected to thermal treatment to induce crystallization as a glass-ceramic. The dominant crystalline...     

Charge transport mechanism of graphite‐nanosheet‐loaded rubber nanocomposites

Nitrile butadiene rubber loaded with different concentrations of thin graphite nanosheets have been successfully prepared by using a two‐roll mill. The percolation concentration of the nanocomposites was 0.5 phr. The I–V characteristic curves showed that the nanocomposites exhibited ohmic behaviour at a certain voltage and then non‐linear behaviour. The Richardson–Schottky and Poole–Frenkel models were used to investigate the reason for the space charge. The experimental data fit the Schottky model well. The conductivity as a function of temperature was also studied and the data were fitted by using the Mott relation. The Mott relation showed that as the concentration of graphite nanosheets in the rubber composite increases, the hopping distance between the graphite nanosheet layers decreases, which enhances the conductivity of the nanocomposite at low concentrations. Copyright © 2011 Society of Chemical Industry     

Process synthesis and optimization of biorefinery configurations

Recently, there has been a growing interest in the development of cost‐effective technologies for the production of biofuels. A common approach to biofuel research is to invent or improve a biochemical or thermochemical conversion step. Subsequently, other conversion and separation steps are added to form a complete biorefinery flowsheet. Because this approach is structured around a specific conversion step, it may limit the possibilities of configuring optimal and innovative biorefineries. This article proposes a novel and systematic two‐stage approach to the synthesis and optimization of biorefinery configurations, given available feedstocks and desired products. In the synthesis stage, a systems‐based approach is developed to create a methodical way for synthesizing integrated biorefineries. This method is referred to as “forward‐backward” approach. It involves forward synthesis of biomass to possible intermediates and reverse synthesis starting with the desired products and identifying necessary species and pathways leading to them. In the optimization stage, Bellman's principle of optimality is applied to decompose the optimization problem into subproblems in which an optimal policy of available technologies is determined for every conversion step. An optimization formulation is utilized to determine the optimal configuration based on screening and connecting the optimal policies and generating the biorefinery flowsheet. A case study of alcohol‐producing pathways from lignocellulosic biomass is solved to demonstrate the merits of the proposed approach. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Fatty Acids in Heterocyclic Synthesis Part XII: Synthesis of Surfactants from Pyrazole, Isoxazole, Pyrimidine and Triazine, Incorporating the 1,3,4-Thiadiazole Moiety Having Dyeing and Antimicrobial Activities

The titled compounds were prepared from 2-amino-5-heptadecyl[1,3,4]thiadiazole (1). Diazotization of (1) produced (2) which was coupled with active methylene compounds and gave azo ⇌ hydrazono derivatives (3A, 3B) _a–d . It was found that there is regio-specificity for addition of different nucleophiles to these tautomers; thus, nitrogen nucleophiles such as hydrazine hydrate, hydroxylamine hydrochloride and thiourea were reacted via Azo tautomer (3A) to yield pyrazole, isoxazole and pyrimidine respectively (5-7), while carbon nucleophiles as phenylisocyanate was reacted via the hydrazono tautomer (3B) and produced triazine derivatives (4). Additionally, the diazonium chloride (2) was coupled with alkaline 2-naphthol and produced 2-(5-heptadecyl-[1,3,4]thiadiazol-2-yl)-1,2-dihydro-3-oxa-1,2-diaza-cyclopenta[a]naphthalene (8). UV–visible spectra of the synthesized colored compounds (2-8) showed λ _max at 374–398 nm, while screening these compounds in vitro against micro-organisms (including structure-activity relationship SAR study) revealed high antibacterial and moderate antifungal activities. Propoxylation of compounds 1, 3, 5, 6, 7 and 8 with 3, 5, 7 mol of propylene oxide produced nonionic surfactants I(a–c)–IX(a–c) having surface active properties so, it is clear that the tested surfactants can be used in the manufacture of dyes, drugs, cosmetics, emulsifiers, pesticides, luminphores for optical applications and many other industries with low toxicity to human beings and the environment owing to their high solubility and good biodegradability.     

Microwave assisted hydrothermal synthesis of engineered cerium oxide nanopowders

Cerium oxide nanopowders have been prepared via microwave assisted hydrothermal technique in the presence of different amounts of poly vinyl pyrrolidone (PVP). The prepared nanopowders were characterized using XRD, TEM and SAED. The results showed that the particle size of the ceria nanopowders was decreased with the increase of PVP amount. The prepared ceria has nanocrystalline cubic fluorite structure with high purity. The influence of PVP content on the densification behavior of CeO₂ was investigated by means of dilatometer and scanning electron microscopy (SEM). It was found that the increase of PVP amount reduced sintering temperature. The cold-pressed powders can be sintered to full density at temperatures starting from 1070 °C in just 10 min.     

Magnetic and Electrical Properties of Glass and Glass-Ceramics Based on Weathered Basalt

Silicon - A total of six glass batches (WB100-WB50) based primarily on weathered basalt with successive addition of bypass cement dust (with the weight content 0–50%) were melted at...     

Synthesis and characterization of cellulose nanowhisker-reinforced-poly(ε-caprolactone) scaffold for tissue-engineering applications

Poly(ε-caprolactone) (PCL) is a bioresorbable and biocompatible polymer with assorted medical applications. However, remarkable hydrophobicity and nonosteoconductivity have stood as a barrier to limit its applications. The present study aims to modify the bulk characteristics of PCL to develop a polymeric scaffold with adequate structural and mechanical properties to support regenerated tissues. For this purpose, functionalized bacterial cellulose nanowhiskers (BCNW-g-βCD-PCL₂₀₀₀) are synthesized. Reinforcing PCL matrix with 4 wt % of the nanowhiskers resulted in a bionanocomposite with promoted bulk properties. Compared to neat PCL, the obtained bionanocomposite shows improvements of 115 and 51% in tensile strength and Young's modulus, respectively; 20% increase in hydrophilicity; 7% increase in degradation rate; and 6% decrease in crystallinity. Gas foaming/combined particulate leaching technique is used to develop highly porous structures of 86–95% porosity with interconnected macropores of mean pore diameters of 250–420 μm. Porous scaffolds showed compression modulus values of 5.3–9.1 MPa and would have promising applications in regenerative medicine. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48481.     

Synthesis and characterization of saturated and unsaturated copolyesters based on bis-1,4-(dicarboxymethoxy) benzene

Saturated copolyester were prepared by copolyesterification of bis-1,4-(dicarboxymethoxy) benzene and phthalic anhydride with diethylene glycol, triethylene glycol, tetraethylene glycol, 1,4-butane diol, 1,2-propane diol, and 1,6-hexamethylene glycol. Also, unsaturated copolyesters were prepared by copolyesterification of bis-1,4-(dicarboxymethoxy) benzene and maleic anhydride with the same glycols. All the copolyester resins obtained have been characterized and unsaturated copolyesters in the form of films were determined. IR and ¹H-NMR spectroscopy were used for both qualitative and quantitative analysis of the copolyesters resins and their hydrolyzate products, after curing with styrene. © 1992 John Wiley & Sons, Inc.     

Investigation of transport phenomena in a hybrid ion exchange-electrodialysis system for the removal of copper ions

Hybrid ion exchange electrodialysis processes allow the removal of metal ions from dilute waste liquids and the recovery of more concentrated solutions. The work reported here was aimed at investigating the two steps in the treatment process, namely, adsorption of metal ions onto the packed bed of resin and electromigration (i.e., the transport of these ions in the complex system under the applied electrical field). The case of copper sulfate was investigated. Dowex resins with a cross-linking degree of 2 and 8% were used. The flux of copper through the resin bed and the current efficiency for ion transfer to the cathode compartment were determined as a function of potential gradient and copper ionic fraction in the bed. Apparent diffusion coefficients of Cu²⁺ in the overall system were deduced from the experimental data.     

Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004