Effect of biological wastewater treatment on the molecular weight distribution of soluble organic compounds and on the reduction of BOD, COD and P in pulp and paper mill effluent

Pulp and paper mill wastewater was characterizated, before (influent) and after (effluent) biological wastewater treatment based on an activated sludge process, by microfiltration (8, 3, 0.45 and 0.22mum) and ultrafiltration (100, 50, 30 and 3kDa) of the wastewater samples into different size fractions. Various parameters were measured on each fraction: molecular weight distribution (MWD) using high performance size exclusion chromatography (HPSEC), total organic carbon (TOC), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), phosphate phosphorus (PO(4)-P), electrical conductivity, pH, turbidity, charge quantity and zeta potential. The MWD, TOC and COD(Cr) results indicated that the majority of the material present in both the influent and effluent was in the medium molecular weight (MW) range (i.e. MW<10kDa) with three main MW sub-fractions. There were no significant differences in the range of the MWD between the influent and effluent samples. The magnitude of the MWD in the effluent was about one half that in the influent, the greatest reduction being in the 6kDa fraction. The 3kDa fractions of both the influent and effluent showed a considerable increase in BOD(7), probably due to the removal of compounds harmful to bacteria in 3kDa ultrafiltration. Influent turbidity decreased considerably in microfiltration (8-0.22mum). As the turbidity was removed by 0.22mum filtration, the anionic charge quantity started to decrease. Particles in the influent and effluent contained 19-29% and 14-20% of the total phosphorus, respectively. The major phosphorus fraction was in the form of soluble phosphate.     

Teachers' work-related non-literature-known building-related symptoms are also connected to indoor toxicity: A cross-sectional study

A previous study showed that classical building-related symptoms (BRS) were related to indoor dust and microbial toxicity via boar sperm motility assay, a sensitive method for measuring mitochondrial toxicity. In this cross-sectional study, we analyzed whether teachers’ most common work-related non-literature-known BRS (nBRS) were also associated with dust or microbial toxicity. Teachers from 15 schools in Finland completed a questionnaire evaluating 20 nBRS including general, eye, respiratory, hearing, sleep, and mental symptoms. Boar sperm motility assay was used to measure the toxicity of extracts from wiped dust and microbial fallout samples collected from teachers’ classrooms. 231 teachers answered a questionnaire and their classroom toxicity data were recorded. A negative binomial mixed model showed that teachers’ work-related nBRS were 2.9-fold (95% CI: 1.2-7.3) higher in classrooms with highly toxic dust samples compared to classrooms with non-toxic dust samples (p = 0.024). The RR of work-related nBRS was 1.8 (95% CI: 1.1-2.9) for toxic microbial samples (p = 0.022). Teachers’ BRS appeared to be broader than reported in the literature, and the work-related nBRS were associated with toxic dusts and microbes in classrooms.     

Fixation of distal femoral osteotomies with self-reinforced poly(L/DL)lactide 70 : 30/bioactive glass composite rods. An experimental study on rats

Self-reinforced poly(L/DL)lactide 70:30/bioactive glass [SR-P(L/DL)LA/bioactive glass] composite rods, 2 mm in diameter and 36 mm in length, were implanted into the dorsal subcutaneous tissue of 16 rats. Osteotomies of the distal femur were fixed with these rods (2 x 15 mm) in 64 other rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests, and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of the osteotomized and intact control femora were performed. At 24 weeks the mechanical properties had decreased significantly. Thirty-nine osteotomies healed uneventfully. One of the 64 evaluated osteotomies showed signs of infection at six weeks, and there were 19 non-unions and six delayed unions. In 20 operations the fixation was loose and out of these 14 non-unions were observed. No gross signs of inflammatory or foreign-body reactions were observed. The present investigation showed that the mechanical strength and fixation properties of SR-P(L/DL)LA/bioactive glass composite rods are suitable for fixation of cancellous bone osteotomies in rats as long as the operative technique is correct. The present article is the first report on the application of SR-P(L/DL)LA/bioactive glass composite rods for fixation of cancellous bone osteotomies.     

Strength retention of drawn self-reinforced polyglycolide rods and fixation properties of the distal femoral osteotomies with these rods. An experimental study on rats

Drawn self-reinforced polyglycolide (SR-PGA) rods, Ø 2 mm and 26 mm long, were implanted in the dorsal subcutaneus tissue of 16 rats. Osteotomies of the distal femur were fixed with SR-PGA rods (2 mm by 15 mm) in another 38 rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of osteotomized and intact control femora were also performed. At three weeks the flexural strength of the rods was 50% of the initial value, and the flexural modulus was 46% of the initial value. Five osteotomy specimens had to be excluded due to dislocation or non-union. One of the 33 evaluated osteotomy specimens showed signs of postoperative infection. Thirty-two osteotomies healed uneventfully. No gross signs of inflammatory or foreign-body reaction were observed. The amount of osteoid surface and active osteoid formation surface reached their highest value in the histomorphometrical analysis at 24 weeks. The present investigation demonstrated that the mechanical strength and fixation properties of the drawn SR-PGA rods are suitable for fixation of cancellous bone osteotomies in rats. The present article is the first report on the successful application of drawn SR-PGA rods for fixation of cancellous bone osteotomies.     

Occurrence of Superconductivity and Magnetism in Nominally Undoped LaOFeAs

Superconductivity in a LaOFeAs system is known to get introduced by F-doping (LaO_1−x F _x FeAs) even under ambient conditions and oxygen deficiency (LaO_1−x FeAs) under high pressure conditions. Hitherto unreported, superconductivity in F-free undoped LaOFeAs samples is observed and confirmed for the first time by various characterization tools–resistive ρ(T,B), magnetic M(T,B) and modulated microwave absorption (MMA) measurements. The ρ(T) at B=0 shows a clear superconducting transition with an onset at T _con∼17 K and a tail-like behavior when R goes to zero at T _c0∼8 K. In the presence of B, the superconducting transition shifts to lower T with a rate ∼−5.5 and −1.65 T/K, depending on whether the ρ(T) has dropped to 90% or 5% of its normal state value, respectively. M(T) in zero field cooling at B=10 mT shows diamagnetic downturn below at ∼12 K. At T<T _c0 the change in MMA with B shows a low field (B∼1 mT) peak, which vanishes at T>T _c0, indicating the presence of weak link superconducting networks in the sample. The sample shows a complex electrical and magnetic behavior in the normal state. For instance, ρ(T) reveals a weak SDW-like anomaly at T∼132 K along with a resistivity minimum at T _min∼78 K. M(T) also shows the presence of a magnetic anomaly at T∼130 K. Both below and above T _con, presence of an additional ferromagnetic component is observed in the isothermal M(B) loop measurements. The superconducting and normal state features of our sample are compared with other undoped and doped LaOFeAs systems reported in the literature.     

Sorption of Pb(II), Cr(III), Cu(II), As(III) to peat,and utilization of the sorption properties in industrial waste landfill hydraulic barrier layers

The low conductivity landfill barrier layers protect the groundwater and soil by limiting the water flow through the bottom layers of the landfill material. Many materials used in hydraulic barrier layers also have sorption properties which could be used to reduce environmental risks. The adsorption of lead, chromium, copper, and arsenic to peat was studied with a batch-type test and a column test for compacted peat, both without pH adjustment in acidic conditions. Peat adsorbed all the metals well, 40 000 mg/kg of lead, 13 000 mg/kg of chromium, and 8400 mg/kg of copper in the column test. Arsenic was only tested in a batch-type test, and in that peat adsorbed 60 mg/kg of arsenic. The column test showed heavy metals to be adsorbed on the surface layers of the compacted peat sample, on the first centimeter of the sample. The adsorption was much greater in the column test than in the batch-type test, partly due to the different pH conditions and the buffer capacity of the peat in the column test. The liquid/solid ratio of the column experiment represented a time period of approximately 40 years in a landfill, under Finnish climate conditions. The hydraulic conductivity of the peat decreased as it was compressed, but it already met the hydraulic conductivity limits set by European Union legislation for the hydraulic barrier layer (1 × 10⁻⁹ m/s at a pressure of 150 kPa for a 5-m layer), with a pressure of 50 kPa. The results show that peat would be an excellent material to construct compacted, low hydraulic conductivity layers with adsorption properties in, e.g. industrial waste landfills.     

Ion-implanted capacitively coupled silicon strip detectors with integrated polysilicon bias resistors processed on a 100 mm wafer

Double-sided silicon strip detectors with integrated coupling capacitors and polysilicon resistors have been processed on a 100 mm wafer. A detector with an active area of 19 × 19 mm² was connected to LSI readout electronics and tested. The strip pitch of the detector is 25 μm on the p-side and 50 μm on the n-side. The readout pitch is 50 μm on both sides. The number of readout strips is 774 and the total number of strips is 1161. On the p-side a signal-to-noise of 35 has been measured using a ⁹⁰Sr β-source. The n-side has been studied using a laser.     

Effect of strain rate on the strain-induced <Emphasis Type="Italic">γ</Emphasis> → <Emphasis Type="Italic">α</Emphasis>′-martensite transformation and mechanical properties of austenitic stainless steels

The effect of strain rate on strain-induced γ → α′-martensite transformation and mechanical behavior of austenitic stainless steel grades EN 1.4318 (AISI 301LN) and EN 1.4301 (AISI 304) was studied at strain rates ranging between 3×10⁻⁴ and 200 s⁻¹. The most important effect of the strain rate was found to be the adiabatic heating that suppresses the strain-induced γ → α′ transformation. A correlation between the work-hardening rate and the rate of γ → α′ transformation was found. Therefore, the changes in the extent of the α′-martensite formation strongly affected the work-hardening rate and the ultimate tensile strength of the materials. Changes in the martensite formation and work-hardening rate affected also the ductility of the studied steels. Furthermore, it was shown that the square root of the α′-martensite fraction is a linear function of flow stress. This indicates that the formation of α′-martensite affects the stress by influencing the dislocation density of the austenite phase. Olson-Cohen analysis of the martensite measurement results did not indicate any effect of strain rate on shear band formation, which was contrary to the transmission electron microscopy (TEM) examinations. The β parameter decreased with increasing strain rate, which indicates a decrease in the chemical driving force of the α → α′ transformation.