Biocide polymers

Summary Potential polymeric herbicides have been synthesized by reacting poly(acrylic acid)s with 3-aniino-1,2,4-triazole and 1-acetyl-5-amino-1,2,4-triazole, respectively. The produced copolymers contained the active moieties as pendant groups in the range of 3 to 27 per cent of weight and with a content of carboxyl groups up to 95 mol-%. The hydrolytic release of 3-amino-1,2,4-triazole was investigated.Part 12: M. Hartmann, H,-J. Bauer, A. Pritzsche and K. Wermann, Makromol. Chem., in press     

Computer-aided design in mechanisms

The man-machine dialog is very important for the design process. In this paper a program system, based on the minicomputer KRS 4201 (ROBOTRON), is demonstrated by using an interactive graphical screen. This program system provides the opportunity to analyze and synthesize mechanisms up to 16 links. The application is demonstrated by designing a front-loader-system for a truck. Real-time animation of seven-bar linkages and coupler curves, including velocity and acceleration, are shown.     

The influence of packaging materials on RF performance

At frequencies beyond 1 GHz, every component of the IC package contributes to the RF performance, whether required or not. In this work, we study the effects of packaging materials namely, the substrate and the globtop/underfill material on RF performance. We have measured interconnects on two area-array CSPs, the ball grid array and the polymer stud grid array using IMEC’s MCM-D technology. The measurements on the package interconnect show that the losses in the package substrate material account for about 50% of the total losses at 1.8 GHz and this drops to less than 20% at 5.2 GHz. The losses due to impedance mismatch dominate the losses especially below 10 GHz and considerable improvement in performance cannot be obtained by using an improved/expensive substrate. The other study is about the influence of globtop/underfill materials on wirebonds (through 3D EM simulations) as well as on standard 50 Ω MCM-D transmission lines (through experiments). While a higher value of dielectric constant of the globtop/underfill material is better on wirebonds, the influence of loss tangent is felt only above values of 0.1. The influence of seven different globtop/undefill materials on 50 Ω transmission lines has been used to extract their dielectric constant and loss tangent values at 30 GHz. These results are very valuable since one can hardly find the properties of globtop/underfill materials beyond 1 GHz.     

Effects of sudden pressure changes in the surrounding gas phase on flow properties of bulk solids

The variation in the behaviour of bulk solids as a result of sudden pressure changes in the surrounding gas phase is of interest in the application of lock hoppers for transfer of bulk solids into pressure vessels. By using such sluice systems, problems occur due to consolidation of the pressurized bulk solids. This paper presents the results of experimental and theoretical research, which allow to describe the influence of several parameters on pressure compensation and the degree of consolidation. With reference to the forces and mechanisms responsible for consolidation, it is possible to describe the different consolidation behaviour of incompressible (limestone) and compressible (hard coal) bulk solids.     

Formation of droplets on Si surfaces bombarded by In from a capillary type liquid metal ion source

Droplet formation on Si surfaces bombarded by 10 keV beams from a liquid metal indium ion source has been observed. It has been verified that excess indium is transported in the ion beam, probably in the form of charged droplets. SIMS, SEM and RBS techniques have been used to study the distribution of droplets at the surface. At the specified ion source operating conditions, equilibrium droplet coverage is of the order of 25%. Individual droplets have an average diameter of 0.35 ωm and an average height of 2.2 nm. At a bombardment current density of 0.1 mA cm^?2, equilibrium coverage is reached in about 1 s.     

Schätzung der modalen Parameter unter Berücksichtigung systematischer Fehler der Frequenzgänge

Zusammenfassung Aufgrund von Eingangs- und Ausgangsst?rungen des Me?systems sowie einer endlichen Frequenzaufl?sung treten stets systematische (Bias-) und zuf?llige Fehler bei gemessenen Frequenzg?ngen und deren Varianzen auf. Auf solchen Frequenzg?ngen und Varianzen beruhende Sch?tzungen der modalen Parameter sind damit ebenfalls systematisch verzerrt. Um die Genauigkeit und Sicherheit der modalen Parameter zu erh?hen, wird ein Sch?tzverfahren vorgestellt, in dem der Einflu? der Biasfehler auf die Sch?tzung n?herungsweise in einer diagonalen Wichtungsmatrix berücksichtigt wird. Es wird gezeigt, da? die systematischen Fehler Einflu? auf die Absch?tzung der statistischen Sicherheit der modalen Parameter haben. Anhand zweier Beispiele wird die Wirksamkeit des Sch?tzverfahrens demonstriert. Prof. Dr.-Ing. Dr.-Ing. E.h.H.K. T?nshoff: Dipl.-Ing.Z. Liu, Institut für Fertigungstechnik und Spanende Werkzeugmaschinen (IFW), Universit?t Hannover.     

Selectivity in Methanol Oxidation as Studied on Model Systems Involving Vanadium Oxides

Oxidation catalysts are modeled by oxide single crystals, thin oxide films, as well as supported oxide nanoparticles. We characterize the surface of those materials using a variety of surface sensitive techniques including scanning tunneling microscopy and spectroscopy, photoelectron spectroscopy, infrared spectroscopy, and thermal desorption spectroscopy. We find temperature dependent structural transformations from V₂O₅(001) to V₂O₃(0001) via V₆O₁₃(001). V₂O₃(0001) is found to be vanadyl terminated in an oxygen ambient and it loses the vanadyl termination after electron bombardment. It is shown that the concentration of vanadyl groups controls the selectivity of the methanol oxy-dehydrogenation towards formaldehyde. A proposal for the mechanism is made. The results on single crystalline thin films are compared with similar measurements on deposited vanadia nanoparticles. The experimental results are correlated with theoretical calculations and models.     

Mesomorphism of Lanthanide(Ⅲ) 4-Hexyloxybenzoates

The 4-alkoxybenzoic acids are well-known liquid crystals showing several mesophases(nematic,smectic C phase or both)depending on the alkoxy chain length and whereby the rigid core of the mesogen is formed by intermolecular hydrogen bonds.In this paper it is shown that the thermal behaviour of lanthanide salts of 4-hexyloxybenzoic acids depends on the lanthanide ion(Ln=La,Pr,Nd,Sm,Eu).The lanthanum(Ⅲ)and praseodymium(Ⅲ)4-hexyloxybenzoates exhibit a smectic A mesophase.No mesophase is found for the corresponding compounds of heavier lanthanides.The thermal properties of the lanthanide(Ⅲ)4-hexyloxybenzoates were investigated by differential scanning calorimetry(DSC),polarising thermo-optical microscopy and synchrotron X-ray radiation.     

Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.