Application of novel extractants for actinide(III)/ lanthanide(III) separation in hollow-fibre modules

Separation tests using hollow-fibre modules were performed for the difficult selective extraction of trivalent actinides over fission lanthanides from acidic media. This article shows that with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine as the extractant, up to 94% americium could be extracted from 1.0 kmol/m³ HNO₃, with minimal lanthanide co-extraction. Using a synergistic mixture of bis(chlorophenyl)dithiophosphinic acid and tri-n-octyl phosphine oxide, tests were performed on extraction, lanthanide scrubbing and stripping. In the extraction test, up to 99.99% americium could be extracted from 0.5 kmol/m³ HNO₃, with approximately one third of the lanthanides being co-extracted. Mass transfer calculations using a consistent set of input data showed good agreement with the experiments.     

Task-relevant late positive component in rats: is it related to hippocampal theta rhythm?

In the last 2 years (1994-95), two symposium volumes and three reviews have been published that were fully devoted to peptide antibiotics (antibacterial peptides or antimicrobial peptides). Since the field has been growing rapidly, this review is largely a follow-up of new results published in the last 2 years. Sequencing of the 16S RNA of the small ribosomal subunit indicate that the microbial world is much larger than generally appreciated. The importance of the natural flora is stressed and its effect on the evolution of peptide antibiotics and immunity in general is discussed.     

Body odour preferences in men and women: do they aim for specific MHC combinations or simply heterozygosity?

The major histocompatibility complex (MHC) is an immunologically important group of genes that appears to be under natural as well as sexual selection. Several hypotheses suggest that certain MHC-allele combinations (usually heterozygous ones) are superior under selective pressure by pathogens. This could influence mate choice in a way that preferences function to create MHC-heterozygous offspring, or that they function to create specific allele combinations that are beneficial under the current environmental conditions through their complementary or epistatic effects. To test these hypotheses, we asked 121 men and women to score the odours of six T-shirts, worn by two women and four men. Their scorings of pleasantness correlated negatively with the degree of MHC similarity between smeller and T-shirt-wearer in men and women who were not using the contraceptive pill (but not in Pill-users). Depending on the T-shirt-wearer, the amount of variance in the scorings of odour pleasantness that was explained by the degree of MHC similarity (r2) varied between nearly 0 and 23%. There was no apparent effect of gender in this correlation: the highest r2 was actually reached with one of the male odours sniffed by male smellers. Men and women who were reminded of their own mate/ex-mate when sniffing a T-shirt had significantly fewer MHC-alleles in common with this T-shirt-wearer than expected by chance. This suggests that the MHC or linked genes influence human mate choice. We found no significant effect when we tested for an influence of the MHC on odour preferences after the degree of similarity between T-shirt-wearer and smeller was statistically controlled for. This suggests that in our study populations the MHC influences body odour preferences mainly, if not exclusively, by the degree of similarity or dissimilarity. The observed preferences would increase heterozygosity in the progeny. They do not seem to aim for more specific MHC combinations.     

Passing of gallstones via the urethra: a complication of laparoscopic cholecystectomy

The phenotype of high K (HK) red blood cells, which is an autosomal recessive, was found in dog groups from 10 of 13 breeds or populations in Japan. The incidence of HK was 26 to 38% in the San'in-Shiba, Shinshu-Shiba and Akita breeds, and the gene frequencies of HK ranged from 0.513 to 0.612. The highest incidence (42%) was found in the Jindo breed from Korea, and the gene frequency was 0.652. Two other groups from Korea also possessed this HK variation. However, although HK cells were not found in dogs from Taiwan, Indonesia, Mongolia and Sakhalin, Russia, the HK phenotype is clearly distributed now throughout Japan and Korea.     

Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.     

Mixed Mode VLSI Implementation of a Neural Associative Memory

A mixed mode digital/analog special purpose VLSI hardware implementation of an associative memory with neural architecture is presented. The memory concept is based on a matrix architecture with binary storage elements holding the connection weights. To enhance the processing speed analog circuit techniques are applied to implement the algorithm for the association. To keep the memory density as high as possible two design strategies are considered. First, the number of transistors per storage element is kept to a minimum. In this paper a circuit technique that uses a single 6-transistor cell for weight storage and analog signal processing is proposed. Second, the device precision has been chosen to a moderate level to save area as much as possible. Since device mismatch limits the performance of analog circuits, the impact of device precision on the circuit performance is explicitly discussed. It is shown that the device precision limits the number of rows activated in parallel. Since the input vector as well as the output vector are considered to be sparsely coded it is concluded, that even for large matrices the proposed circuit technique is appropriate and ultra large scale integration with a large number of connection weights is feasible.     

Simulation of the submerged energy nozzle-mold water model system using laser-optical and computational fluid dynamics methods

The present work describes quantitative digital particle image velocimetry measurements of a full-scale water model of a thin slab mold. Different casting speeds and two submerged entry nozzles with one and two outlet ports have been investigated. The flow pattern of the single-port nozzle shows a counterclockwise-rotating double vortex that is nearly steady-state but leads to high stationary surface waves. The flow jets out of the two-port nozzle oscillate and produce a transient flow pattern with low wave amplitudes. The amplitudes for the one-port nozzle show a linear variation with the volumetric flow rate. The experimental results lead to a good interpretation of the flow phenomena and are used to validate steady-state numerical simulations with the commercial program, CFX, on the basis of the Reynolds equations. To describe anisotropic turbulence effects, the Reynolds stress model (RSM) is used for the flat single-port nozzle and the standard k-ɛ model for the mold flow. The calculated mean velocities and wave amplitudes, predicted from pressure distribution at the water surface, are generally in the consensus of the experimental data. An erratum to this article is available at .     

Modelling the impact of energy taxation

Energy taxation in Sweden is complicated and strongly guides and governs district energy production. Consequently, there is a need for methods for accurate calculation and analysis of effects that different energy tax schemes may have on district energy utilities. Here, a practicable method to analyse influence of such governmental policy measures is demonstrated. The Swedish Government has for some years now been working on a reform of energy taxation, and during this process, several interest groups have expressed their own proposals for improving and developing the system of energy taxation. Together with the present system of taxation, four new alternatives, including the proposed directive of the European Commission, are outlined in the paper. In a case study, an analysis is made of how the different tax alternatives may influence the choice of profitable investments and use of energy carriers in a medium‐sized district‐heating utility. The calculations are made with a linear‐programming model framework. By calculating suitable types and sizes of new investments, if any, and the operation of existing and potential plants, total energy costs are minimized. Results of the analysis include the most profitable investments, which fuel should be used, roughly when during a year plants should be in operation, and at what output. In most scenarios, the most profitable measure is to invest in a waste incineration plant. However, a crucial assumption is, with reference to the new Swedish waste disposal act, a significant income from incinerating refuse. Without this income, different tax schemes result in different technical solutions being most profitable. An investment in cogeneration seems possible in only one scenario. It is also found that particular features of some alternatives seem to oppose both main governmental policy goals, and intentions of the district heating company. Copyright © 2002 John Wiley & Sons, Ltd.