表面稳定模式铁电液晶的电光特性测试

采用一种改进的高分子膜摩擦定向法成功地实现了表面稳定模式铁电液晶的光学双稳态，对比度大于１４０，响应时间达１００微秒。     

纤维共晶生长界面前沿三维扩散场解析

修正Ｊａｃｋｓｏｎ和Ｈｕｎｔ关于在垂直生长方向截面上溶质扩散各向同性假设，求解三维Ｌａｐｏｌａｃｅ方程，获得纤维共晶生长界面前沿三维稳态扩散场，并证明Ｊａｃｋｓｏｎ和Ｈｕｎｔ的二维模型是实际生长的二维简化和一阶近似，并用丁二腈（ＳＣＮ）一梓脑（ＣＡＭ）纤维共晶系统计算生长界面前沿溶质分布。     

Influence of gas composition on recurrence of atelectasis after a reexpansion maneuver during general anesthesia

BACKGROUND: Atelectasis, an important cause of impaired gas exchange during general anesthesia, may be eliminated by a vital capacity maneuver. However, it is not clear whether such a maneuver will have a sustained effect. The aim of this study was to determine the impact of gas composition on reappearance of atelectasis and impairment of gas exchange after a vital capacity maneuver. METHODS: A consecutive sample of 12 adults with healthy lungs who were scheduled for elective surgery were studied. Thirty minutes after induction of anesthesia with fentanyl and propofol, the lungs were hyperinflated manually up to an airway pressure of 40 cmH2O. FIO2 was either kept at 0.4 (group 1, n = 6) or changed to 1.0 (group 2, n = 6) during the recruitment maneuver. Atelectasis was assessed by computed tomography. The amount of dense areas was measured at end-expiration in a transverse plane at the base of the lungs. The ventilation-perfusion distributions (VA/Q) were estimated with the multiple inert gas elimination technique. The static compliance of the total respiratory system (Crs) was measured with the flow interruption technique. RESULTS: In group 1 (FIO2 = 0.4), the recruitment maneuver virtually eliminated atelectasis for at least 40 min, reduced shunt (VA/Q < 0.005), and increased at the same time the relative perfusion to poorly ventilated lung units (0.005 < VA/Q < 0.1; mean values are given). The arterial oxygen tension (PaO2) increased from 137 mmHg (18.3 kPa) to 163 mmHg (21.7 kPa; before and 40 min after recruitment, respectively; P = 0.028). In contrast to these findings, atelectasis recurred within 5 min after recruitment in group 2 (FIO2 = 1.0). Comparing the values before and 40 min after recruitment, all parameters of VA/Q were unchanged. In both groups, Crs increased from 57.1/55.0 ml.cmH2O-1 (group 1/group 2) before to 70.1/67.4 ml.cmH2O-1 after the recruitment maneuver. Crs showed a slow decrease thereafter (40 min after recruitment: 61.4/60.0 ml.cmH2O-1), with no difference between the two groups. CONCLUSIONS: The composition of inspiratory gas plays an important role in the recurrence of collapse of previously reexpanded atelectatic lung tissue during general anesthesia in patients with healthy lungs. The reason for the instability of these lung units remains to be established. The change in the amount of atelectasis and shunt appears to be independent of the change in the compliance of the respiratory system.     

各种状态的液体通过核孔膜的规律

介绍了液体通过核孔膜规律方面取得的新认识，包括：（１）纯净液体通过核孔膜的规律；（２）核孔膜测定液体粘滞系数的各种方法；（３）各种物质溶液浓度的核孔膜测定；（４）液相混合物快速分离和化学分离；（５）流体中固体微粒对核孔膜的堵塞及其公式；（６）用核孔膜滤除液中各各斩规律。     

Fe－Cu包埋团簇的制备及其微观结构的研究

基于溅射－气体－聚集（ＳＧＡ）形成团簇的原理，提出了蒸发－气体－聚集（ＥＧＡ）共沉积方法，并在方华膜载网上成功地制备了Ｆｅ－Ｃｕ纳米磁性包理团簇样品。ＴＥＭ／ＥＤ分析表明，样品中Ｆｅ团簇被Ｃｕ原子所包裹，形成了以Ｆｅ团簇为芯，Ｃｕ膜为壳的良好的芯－壳式包埋结构。当衬底温度由２５℃变化到２００℃时，样品形貌由弥散状过渡到集团状，直至形成大的块状；其结构也相应的由Ｆｅ－Ｃｕ多晶共存变化为一种不规则的单晶形态。     

变速箱结构设计专家系统技术的研究

结构设计是机械产品设计过程中的重要环节，解决结构设计的智能化不但可以缩短产品的设计周期，而且还可以降低成本，提高设计质量。专家系统是解决智能化设计的技术之一。本文讨论有关结构专家系统的几个关键技术，主要包括系统的控制策略，面积对象的知识表达方式及结构设计的并行设计     

世界高新材料技术发展的新趋势

本文根据90年代以来新材料技术的新进展,高度概括地评述了世界新材料技术发展的新趋势,以期对跟踪世界高新技术提供依据。     

双迭片弯曲压电陶瓷换能器及振动模态分析测量

介绍了双迭片弯曲压电陶瓷换能器的制作及边缘固定金属压电陶瓷双迭片弯曲振动，并利用有限元分析了换能器的谐振模式，采用激光多普勒干涉仪对换能器的谐振特性以及振动速度和位移分布进行了测量和分析，结果表明：换能器空载性能良好，通过有限元分析与先进测量手段的结合，能够对换能器器件的制作与分析进行指导。     

松香及其衍生物在浮选分离中的应用

介绍了松香的来源、化学组成及理化性质；讨论了松香及其衍生物在非硫化物矿浮选分离、有色金属离子的浮选分离以及从水溶液中浮选分离有机物等方面的应用情况。