Melt spun matrix fibers of toughened polypropylene copolymers modified by high energy electrons

Binary blends of polypropylene (PP) and ethylene‐octene copolymer (EOC) are prepared by continuous electron‐induced reactive processing at various mass ratios of the blend components and various doses without adding of any grafting agents. The influence of mass ratio and dose is investigated in order to get the optimum processing behavior of toughened PP as well as optimum properties of resulting fibers. It is found that toughened PP with a PP/EOC blend ratio of 97.5–2.5  mass % can be used advantageously as a matrix component for the process of online spinning of glass fiber/toughened PP hybrid yarns. Such hybrid yarns belong to one of the most advanced production methods for the manufacturing of fiber reinforced thermoplastic composites with an increased mechanical performance. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44011.     

Controlling micro‐ and nanofibrillar morphology of polymer blends in low‐speed melt spinning process. Part II: Influences of extrusion rate on morphological changes of a PLA/PVA blend through a capillary die

The effects of the extrusion rate on the morphological changes of poly(lactic acid) (PLA)/poly(vinyl alcohol) (PVA) blend through a capillary die were investigated. In this study, the extrusion rate or mass flow rate is altered from 0.5 g min^?1 to 2 g min^?1 with an increment of 0.5 g min^?1. The PLA/PVA blend with a composition of 30/70 (wt %) exhibits a particle matrix morphology with dispersed PLA droplets within the PVA matrix. It is found that, the spherical or ellipsoidal dispersed PLA droplets are elongated and coalesced into rod‐like or longer ellipsoidal droplets when they pass through the capillary die. When the extrusion rate increases, the coalescence between the large PLA droplets occurs more intense. However, the changes of the extrusion rate have no strong effect on the coalescence of small droplets having diameter less than about 150 nm. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44257.     

High-temperature gradient HPLC for the separation of polyethylene–polypropylene blends

A high-temperature gradient HPLC method has been developed for the analysis of polyethylene–polypropylene blends. For the first time it was possible to separate these polyolefin blends by a chromatographic technique which is operating at 140 °C. Blends of a commercial polypropylene and a medium molar mass linear polyethylene were separated using a mobile phase of ethylene glycol monobutylether (EGMBE) and 1,2,4-trichlorobenzene (TCB) and silica gel as the stationary phase. With the use of n-decanol as sample solvent, a precipitation–redissolution mechanism for polyethylene (PE) was established while polypropylene (PP) is eluted in size exclusion mode.     

Inhibition of HIV-1 by a peptide ligand of the genomic RNA packaging signal Psi

The interaction of the nucleocapsid NCp7 of the human immunodeficiency virus type 1 (HIV-1) Gag polyprotein with the RNA packaging signal Psi ensures specific encapsidation of the dimeric full length viral genome into nascent virus particles. Being an essential step in the HIV-1 replication cycle, specific genome encapsidation represents a promising target for therapeutic intervention. We previously selected peptides binding to HIV-1 Psi-RNA or stem loops (SL) thereof by phage display. Herein, we describe synthesis of peptide variants of the consensus HWWPWW motif on membrane supports to optimize Psi-RNA binding. The optimized peptide, psi-pepB, was characterized in detail with respect to its conformation and binding properties for the SL3 of the Psi packaging signal by NMR and tryptophan fluorescence quenching. Functional analysis revealed that psi-pepB caused a strong reduction of virus release by infected cells as monitored by reduced transduction efficiencies, capsid p24 antigen levels, and electron microscopy. Thus, this peptide shows antiviral activity and could serve as a lead compound to develop new drugs targeting HIV-1.     

Amino Acid Transporter LAT1 (SLC7A5) Mediates MeHg-Induced Oxidative Stress Defense in the Human Placental Cell Line HTR-8/SVneo

The placental barrier can protect the fetus from contact with harmful substances. The potent neurotoxin methylmercury (MeHg), however, is very efficiently transported across the placenta. Our previous data suggested that L-type amino acid transporter (LAT)1 is involved in placental MeHg uptake, accepting MeHg-L-cysteine conjugates as substrate due to structural similarity to methionine. The aim of the present study was to investigate the antioxidant defense of placental cells to MeHg exposure and the role of LAT1 in this response. When trophoblast-derived HTR-8/SVneo cells were LAT1 depleted by siRNA-mediated knockdown, they accumulated less MeHg. However, they were more susceptible to MeHg-induced toxicity. This was evidenced in decreased cell viability at a usually noncytotoxic concentration of 0.03 µM MeHg (~6 µg/L). Treatment with ≥0.3 µM MeHg increased cytotoxicity, apoptosis rate, and oxidative stress of HTR-8/SVneo cells. These effects were enhanced under LAT1 knockdown. Reduced cell number was seen when MeHg-exposed cells were cultured in medium low in cysteine, a constituent of the tripeptide glutathione (GSH). Because LAT1-deficient HTR-8/SVneo cells have lower GSH levels than control cells (independent of MeHg treatment), we conclude that LAT1 is essential for de novo synthesis of GSH, required to counteract oxidative stress. Genetic predisposition to decreased LAT1 function combined with MeHg exposure could increase the risk of placental damage.     

Hot corrosion of TBC-coated components upon combustion of low-sulfur fuels

Gas turbine reliability is a crucial requirement for passenger safety in aviation and a secure energy supply. Hence, corrosive degradation of combustor parts, vanes, and blades in gas turbines must be prevented. One of the most severe forms of corrosion is alkali-sulfate-induced hot corrosion, which is associated with internal sulfidation of components and is usually anticipated to fade in importance in the absence of sulfur. However, the literature suggests that hot corrosion might still occur in low-sulfur combustion gases. In this study, established thermodynamic modeling methods are used to analyze the low-sulfur hot corrosion regime. Liquid sodium chromate is found to be stable in these conditions. A comparison of calculation results and engine findings suggests that high alkali levels can negatively impact thermal barrier coating life even if sulfur is absent in the fuel. Laboratory tests are carried out to validate the chromate formation on MCrAlY-coated specimens. It is shown that molten sodium chromate can alter the oxidation behavior of MCrAlY, promoting the formation of voluminous spinel. This represents a new and different form of hot corrosion compared to type I hot corrosion.     

Trend Analysis and Spatial Prediction of Groundwater Levels Using Time Series Forecasting and a Novel Spatio-Temporal Method

Water Resources Management - Overexploitation of groundwater in the Malayer Plain has resulted in a continuous decline of groundwater levels over recent years with associated risks to water...     

Highly reflective coatings for interior and exterior steel cladding and the energy efficiency of buildings

The effect of surface heat-radiation properties of coil-coated steel cladding material on the energy efficiency of buildings in Nordic climate is addressed by parallel temperature and energy usage measurements in a series of test cabins with different exterior solar reflectivity and interior thermal reflectivity. During one year, a number of one- or two-week experiments with air conditioner cooling and electrical floor heating were made while logging air-, radiation- and surface temperatures, energy consumption and weather conditions. Measurements show significant energy savings in the test cabins by the use of high thermal reflectivity interior surfaces both during heating and cooling and a strongly reduced cooling demand by the use of high solar reflectivity exterior surfaces. Results are interpreted within the context of a steady-state energy flux model, to illuminate the importance of surface resistance properties (radiation and convective heat dissipation).     

Nontracking solar concentrators

We derive the theoretical upper limit for concentration of direct solar radiation at low latitudes with nontracking concentrators from the projected solid angle sampled by the apparent motion of the sun, for the case where the energy efficiency is referred to the energy incident on the entrance aperture. Based on the fact that the solar radiation is not uniformly distributed within this projected solid angle and that the apparent solar motion is known, we derive the optimal acceptance as a function of direction and time, which means rejecting the lower density radiation and switching off the device when losses would be higher than gains. Just as a device may gain concentration by rejecting radiation from certain directions, it can also gain by not operating at all, thus avoiding losses at certain times. Trough-type systems, which have translational symmetry, cannot be ideal nontracking concentrators, but for low losses they perform only slightly worse than general three-dimensional concentrators.     

Experimental and numerical analysis of seat belt bunching phenomenon

In current cars, loops are commonly used to redirect the webbing which reels out from the retractor to the passenger's shoulder. Some types of pillar loops, also called D-rings, lead to a non-systematic instability. The webbing, which should scroll without hindrance through the D-ring, laterally shifts, bunches and produces the overturning of the ring.