Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment

Bamboo strips treated with caustic solutions of different concentrations, e.g., 5%, 10%, 15%, 20%, 25%, and 50%, were subjected to mechanical testing giving stresses on tensile strength, percent elongation at break, flexural strength, flexural modulus, and toughness. The change in average density was ?15%, and the weight loss value shows a maximum of 21.94% at 50% alkali treatment. The mechanical properties of bamboo strips increase steadily with increasing concentration of caustic soda, showing a comparable increased value at 15 and 20%, and then exhibiting a gradual fall. The percent elongation at break corroborates these observations showing a continuous decreasing trend. The properties under investigation exhibit a clear transition in between 15 and 20% alkali concentration. The morphology of strips was studied by scanning electron microscope and polarizing light microscope. The crystal structure of both untreated and treated strips was compared by XRD analysis. In both cases, the breakdown of the crystal structures of the cellulose fibers and the recrystallization or reorientation of the degraded chains that are devoid of hemicellulose are quite apparent. However, at a very high concentration (to the extent of 25%) the breakdown of structure predominates much more over the reorientation or recrystallization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Corrosion failure of Zn–Al detonator housing

Some batches of detonator housings made up of Chromium plated Zn–Al alloy were found in an extensively cracked condition after few months of storage at room temperature. An analysis of the failure showed that the cracks were due to intergranular corrosion facilitated by segregation of lead at the grain boundaries. Improper chromium plating further aggravated the corrosion problem. This failure case emphasises the need for strict control of chemical composition for components made from Zn–Al alloy and the process of Cr plating of the components.     

Microarchitectures for Managing Chip Revenues under Process Variations

As transistor feature sizes continue to shrink intothe sub-90nm range and beyond, the effects of process variationson critical path delay and chip yields have amplified. A commonconcept to remedy the effects of variation is speed-binning, bywhich chips from a single batch are rated by a discrete range offrequencies and sold at different prices. In this paper, we discussstrategies to modify the number of chips in different bins andhence enhance the profits obtained from them. Particularly, wepropose a scheme that introduces a small Substitute Cacheassociated with each cache way to replicate the data elementsthat will be stored in the high latency lines. Assuming a fixedpricing model, this method increases the revenue by as much as13.8% without any impact on the performance of the chips.     

Placebo-controlled immunotherapy with Cocos nucifera pollen extract

The effectiveness of Cocos nucifera pollen extract immunotherapy (CPE-IT) was studied in 96 patients allergic to C. nucifera pollen. A placebo-controlled study was performed at random for a period of 6-12 months. The clinical status of the patients measured by the symptom-medication scores demonstrated that C. nucifera pollen-allergic patients had significant (p < 0.005) clinical improvement after CPE-IT in comparison to placebo treatment. Serological study resulted a significant reduction (p < 0.001) of specific IgE and significant elevation (p < 0.01) of specific IgG in post-therapeutic patients' sera which were correlated significantly (r = 0.45, p < 0.001); the changes of the above immunoglobulin levels in the placebo-treated patients were nonsignificant. However, there was no correlation between symptom-medication scores and changes in specific serum IgE or IgG levels.     

Impact of QOS requirements on video coding for ATM networks

The broadband integrated services digital networks (B-ISDN) based on asynchronous transfer mode (ATM) technology can support a wide range of applications such as voice, video, still images, and data. Compression techniques increase the effective bandwidth utilization, but the bursty and asynchronous nature of the traffic can still lead to congestion in the network, and degradation of image quality and quality of service (QOS). Some of the features to provide better coding schemes for ATM networks are layered coding, resynchronization, buffering, interleaved schemes, constrained bit rate due to buffers, encapsulation with the RTP or AAL1 for clock recovery, lapped transforms, motion compensation, and optimal bit allocation for coders based on wavelet transforms. We review various techniques forimage and video coding such as transforms, motion compensation, vector quantization, and subband coding. We outline the impact of the cell loss ratio (CLR), delay and cell delay variation (CDV) on video coding: blocking effects, loss of frame synchronization, motion vectors, and vector quantization codewords. The open problems include tuning coding parameters to the available QOS provided by the network.     

A magnetometer system to estimate location and size of long,horizontal ferrous rods

An experimental instrument is described which explicitly estimates location of ferrous rods parallel to a plane of measurement by analyzing simultaneous magnetic field and position data. The instrument consists of a unit containing a fluxgate magnetometer, position sensor and signal-conditioning circuits, connected to a unit containing a microprocessor, displays and associated electronics. An operator scans the sensor unit over the measurement surface, and the microprocessor estimates location, rod length and diameter. Experiments to estimate the parameters of horizontal typical reinforcing rods under a horizontal plane showed that the axis position could be estimated with an error of less than 0.5 cm, the length with a precision of <5 cm (<3.5%) and the depth with a precision of <0.4 cm at depths of 8 to 18 cm. Estimation of rod diameter was unreliable due to the presence of substantial remanent magnetization