Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system

Approximately 1.5-2.5 μm thick nanocomposite coatings of TiAlCrYN were deposited using a four-cathode reactive unbalanced pulsed direct current magnetron sputtering system from the sputtering of Ti, Al, Cr, and Y targets in Ar + N₂ plasma. The TiAlCrYN nanocomposite coatings were deposited on various substrates such as high speed steel (HSS) drill bits, mild steel and silicon. TiAlCrYN coatings with almost similar mechanical properties but with different Ti, Al, Cr and Y contents were prepared to study their thermal stability and machining performance. The structural and mechanical properties of the coatings were characterized using X-ray diffraction and nanoindentation technique, respectively. The elemental composition, bonding structure, surface morphology and cross-sectional data were studied using energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy and field-emission scanning electron microscopy, respectively. Nanoscratch tests were performed to determine the adhesive strength of the coatings. The corrosion behavior of TiAlCrYN nanocomposite coatings on mild steel substrate was studied using potentiodynamic polarization in a 3.5% NaCl solution. Micro-Raman spectroscopy was used to characterize the structural changes as a result of heating of the nanocomposite coatings in air (600-1000 °C). TiAlCrYN coatings prepared at 17 at.% Ti, 13 at.% Al, 21 at.% Cr and 1 at.% Y exhibited thermal stability as high as 900 °C in air (denoted as Sample 3). For the performance evaluation, the TiAlCrYN coated HSS drill bits were tested under accelerated machining conditions. With a drill speed of 800 rpm and a feed rate of 0.08 mm/rev the TiAlCrYN coated HSS drill bits (Sample 3) averaged 657 holes, while drilling a 12 mm thick 304 stainless steel plate under dry conditions, before failure. Whereas, the uncoated drill bits failed after drilling 50 holes under the same machining conditions. Results indicated that for the HSS drill bits coated with TiAlCrYN, the tool life increased by a factor of more than 12.     

Multiple Antenna Enhancements for a High Rate CDMA Packet Data System

A High Data Rate (HDR) system has been proposed for providing downlink wireless packet service by using a channel-aware scheduling algorithm to transmit to users in a time-division multiplexed manner. In this paper, we propose using multiple antennas at the transmitter and/or at the receiver to improve performance of an HDR system. We consider the design tradeoffs between scheduling and multi-antenna transmission/detection strategies and investigate the average Shannon capacity throughput as a function of the number of antennas assuming ideal channel estimates and rate feedback. The highest capacities are achieved using multiple antennas at both the transmitter and receiver. For such systems, the best performance is achieved using a multi-input multi-output capacity-achieving transmission scheme such as BLAST (Bell Labs Layered Space-Time) in which the transmitted signal is coded in space and time, and the receive antennas are used to resolve the spatial interference. In the second part of the paper, we discuss practical transmitter and receiver architectures using BLAST for approaching the theoretical gains promised by the capacity analysis. Because the terminal receivers will be portable devices with limited computational and battery power, we perform a computational complexity analysis of the receiver and make high-level assessments on its feasibility. We conclude that the overall computational requirements are within the reach of current hardware technology.     

Phytol Derivatives as Drug Resistance Reversal Agents

Phytol was chemically transformed into fifteen semi‐synthetic derivatives, which were evaluated for their antibacterial and drug resistance reversal potential in combination with nalidixic acid against E. coli strains CA8000 and DH5α. The pivaloyl ( 4 ), 3,4,5‐trimethoxybenzoyl ( 9 ), 2,3‐dichlorobenzoyl ( 10 ), cinnamoyl ( 11 ), and aldehyde ( 14 ) derivatives of phytol ((2E,7R,11R)‐3,7,11,15‐tetramethyl‐2‐hexadecen‐1‐ol) were evaluated by using another antibiotic, tetracycline, against the MDREC‐KG4 clinical isolate of E. coli. Derivative 4 decreased the maximal inhibitory concentration (MIC) of the antibiotics by 16‐fold, while derivatives 9 , 10 , 11 , and 14 reduced MIC values of the antibiotics up to eightfold against the E. coli strains. Derivatives 4 , 9 , 10 , 11 , and 14 inhibited the ATP‐dependent efflux pump; this was also supported by their in silico binding affinity and down‐regulation of the efflux pump gene yojI, which encodes the multidrug ATP‐binding cassette transporter protein. This study supports the possible use of phytol derivatives in the development of cost‐effective antibacterial combinations.     

Multiplex PCR-based strategy to detect contamination with mycotoxigenic Fusarium species in rice and fingermillet collected from southern India

BACKGROUND: The genus Fusarium comprises a diverse group of fungi including several species that produce mycotoxins in food commodities. In the present study, a multiplex PCR was standardised for the group‐specific detection of fumonisin‐producing and trichothecene‐producing strains of Fusarium species. Primers for genus‐level recognition of Fusarium spp. were designed from the internal transcribed spacer regions 1 and 2 of rDNA. Primers for group‐specific detection were designed from the tri5 and tri6 genes involved in trichothecene biosynthesis and the fum1 and fum13 genes involved in fumonisin biosynthesis. RESULTS: Among the various genera and their strains tested, all the 85 confirmed Fusarium strains were positive for rDNA gene and the rest stayed negative. From among the Fusarium strains, 15 had amplification for trichothecene‐ and 20 for fumonisin‐encoding genes. All PCR positive trichothecene chemotypes of Fusarium species tested were positive for chemical analysis but in the case of fumonisins, of the 20 PCR positive cultures, only 13 showed positive for chemical analysis by HPTLC. CONCLUSION: The assay described here provided a rapid and reliable detection of trichothecene‐ and fumonisin‐producing Fusarium directly from natural food grains and the results were always comparable with a conventional HPTLC detection method. It can, therefore, be used by the food industry to monitor quality and safety. Copyright © 2011 Society of Chemical Industry     

Perfect reconstruction of uniform samples from K-th order nonuniform samples

In this paper, we propose a new discrete-time model which relates uniform samples and K-th order nonuniform (KONU) samples. Typically, such situations may occur in practice where the sampling rates of analog-to-digital converters (ADCs) in a cluster of sensors may be different. This paper also outlines a digital signal processing approach to reconstructing uniform samples from the nonuniform samples produced by time interleaving analog-to-digital converters (TI-ADCs) with different sampling rates and time-mismatches.     

Anti-oxidant activity and total phenolic content of some Asian vegetables

The anti-oxidant activity of extracts from 36 vegetables was evaluated by using a model system consisting of β-carotene and linoleic acid. The total phenolics of the extracts was determined spectrophotometrically according to the Folin–Ciocalteau procedure and ranged from 34 to 400 mg (100 g)⁻¹ on a fresh weight basis. Mint, aonla, black carrots, chenopodium, fenugreek, kachnar and ginger had high phenolic contents. The anti-oxidant activity expressed as per percent inhibition of oxidation ranged from a high of 92% in turmeric extracts to a low of 12.8% in long melon. Other vegetables found to have high anti-oxidant activity (>70%) were kachnar, aonla, ginger, fenugreek, mint, beetroot, black carrots, Brussels sprouts, broccoli, lotus stem, yam, coriander and tomato. Anti-oxidant activity correlated significantly and positively with total phenolics ( r ²=0.6578, P  < 0.05). The results indicate that vegetables containing high phenolics may provide a source of dietary anti-oxidants.     

Enzyme‐catalyzed regioselective synthesis of sugar esters and related compounds

In this review, a comprehensive and illustrative survey is made of the regioselective synthesis of esters of sugars and related compounds using lipases. The main emphasis has been given to the screening and use of commercially available lipases for the enzymatic esterification of neutral monosaccharides, disaccharides, sugar alcohols and their selected ether and ester derivatives. The effect of solvents and solubilizing agents in improving the yields of the resultant sugar fatty acid esters has been incorporated. Further, solvent‐free esterification with molten fatty acids, use of ionic liquids and microwave radiations for improvement in the methodology have also been discussed. Copyright © 2006 Society of Chemical Industry     

Fatty acid metabolism in hypoxic rat liver

Fatty acid metabolism was investigated in adult male albino rats exposed to hypobaric hypoxia at 25,000 ft simulated altitude for 6 h at 32 degrees C. Oxidation and esterification of palmitic acid-1-14C and de novo lipogenesis from acetate-1-14C were studied. Palmitic acid-1-14C oxidation in liver slices was normal while acetoacetate formation was increased. In vivo esterification of palmitic acid-1-14C to form triglycerides was increased while formation of phosphatidylcholine and phosphatidylethanolamine was observed to decrease. Decreased incorporation into plasma phosphatidylcholine with unaltered total activity in plasma triglycerides was observed. The incorporation of acetate-1-14C was observed to remain unaltered in triglycerides and phospholipids of liver with a similar pattern in the plasma indicating unaltered de novo lipogenesis. There appears to be increased esterification of fatty acids with probably impaired release of triglycerides into plasma while fatty acid biosynthesis remains unaffected.