Rheological properties of starches from grain amaranth and their relationship to starch structure

Amaranth starch (Amaranthus cruentus L. and Amaranthus hypochondriacus L.) in this investigation possessed a relatively small and uniform granule size of a type “A” pattern obtained by X‐ray diffraction, with the degree of crystallinity ranging from 24.5 to 27.9%. This was followed by work on steady and dynamic rheological properties on shear of seven native amaranth starches. Aqueous pastes (5% solids) exhibited shear‐thinning behavior, and the flow behavior was fitted with the Herschel–Bulkley equation (regression coefficients were over 0.99). Cultivar V69 showed much higher G′ (storage modulus) and G″ (loss modulus) than the other samples and produced a solid‐like gel, which could be attributed to the high amylose content of its network. Correlation analysis revealed that amylose content was positively correlated with G′ and negatively with the loss tangent (tan δ) of the material.     

Backfire prediction in a manifold injection hydrogen internal combustion engine

Hydrogen internal combustion engine (H2ICE) easily occur inlet manifold backfire and other abnormal combustion phenomena because of the low ignition energy, wide flammability range and rapid combustion speed of hydrogen. In this paper, the effect of injection timing on mixture formation in a manifold injection H2ICE was studied in various engine speed and equivalence ratio by CFD simulation. It was concluded that H2ICE of manifold injection have an limited injection end timing in order to prevent backfire in the inlet manifold. Finally, the limit of injection end timing of the H2ICE was proposed and validated by engine experiment.     

Cross-Layer Design for QoS in Wireless Mesh Networks

Cross-layer design for quality of service (QoS) in wireless mesh networks (WMNs) has attracted much research interest recently. Such networks are expected to support various types of applications with different and multiple QoS and grade-of-service (GoS) requirements. In order to achieve this, several key technologies spanning all layers, from physical up to network layer, have to be exploited and novel algorithms for harmonic and efficient layer interaction must be designed. Unfortunately most of the existing works on cross-layer design focus on the interaction of up to two layers while the GoS concept in WMNs has been overlooked. In this paper, we propose a unified framework that exploits the physical channel properties and multi-user diversity gain of WMNs and by performing intelligent route selection and connection admission control provides both QoS and GoS to a variety of underlying applications. Extensive simulation results show that our proposed framework can successfully satisfy multiple QoS requirements while it achieves higher network throughput and lower outage as compared to other scheduling, routing and admission control schemes.     

Magnetic trapping of decelerated neutral atoms

A scheme is proposed for trapping atoms having finite magnetic moments using inhomogeneous magnetostatic fields. Fields of 0.1 T can be used to contain atoms decelerated to v few m/s. Application to the NBS. decelerated atom project is discussed.     

Design,Modeling, Fabrication,and Evaluation of Thermoelectric Generators with Hot-Wire Chemical Vapor Deposited Polysilicon as Thermoelement Material

This paper presents the design, modeling, fabrication, and evaluation of thermoelectric generators (TEGs) with p-type polysilicon deposited by hot-wire chemical vapor deposition (HWCVD) as thermoelement material. A thermal model is developed based on energy balance and heat transfer equations using lumped thermal conductances. Several test structures were fabricated to allow characterization of the boron-doped polysilicon material deposited by HWCVD. The film was found to be electrically active without any post-deposition annealing. Based on the tests performed on the test structures, it is determined that the Seebeck coefficient, thermal conductivity, and electrical resistivity of the HWCVD polysilicon are 113 μV/K, 126 W/mK, and 3.58 × 10^?5 Ω m, respectively. Results from laser tests performed on the fabricated TEG are in good agreement with the thermal model. The temperature values derived from the thermal model are within 2.8% of the measured temperature values. For a 1-W laser input, an open-circuit voltage and output power of 247 mV and 347 nW, respectively, were generated. This translates to a temperature difference of 63°C across the thermoelements. This paper demonstrates that HWCVD, which is a cost-effective way of producing solar cells, can also be applied in the production of TEGs. By establishing that HWCVD polysilicon can be an effective thermoelectric material, further work on developing photovoltaic-thermoelectric (PV-TE) hybrid microsystems that are cost-effective and better performing can be explored.