Public awareness of the environmental impact and management of carbon dioxide capture,utilization and storage technology: the views of educated people in China

Carbon dioxide capture, utilization and storage (CCUS) is regarded as an important carbon emissions reduction technology response to climate change. Though some full-chain CCUS pilot projects have operated in China, many barriers exist when stepping up to commercial applications, including significant negative perceptions of the environmental risk of CCUS. Therefore, to tailor constructive training or outreach programs for public acceptance of CCUS in China, a large national survey of public perceptions of CCUS technology was conducted in 2013. The questionnaire contained four themes focusing on people with a tertiary education. Six hundred paper–pencil questionnaires were dispatched to 22 universities/enterprises across 19 provinces and 2 municipalities, with a response rate of 95%. The results show that 91.4% of the participants agreed that the earth was experiencing climate change, and 74.3% were interested in low-carbon technologies, but while 22% had heard of CCUS, although with limited knowledge, only 3.6% had a good understanding of the technology. The results from the second part of the questionnaire show that 80.4% of participants believed that CCUS may help to mitigate the impacts of global warming, but the “Not in My Back Yard” (NIMBY) phenomenon was obvious from the location-based objections to transportation and storage processes. In addition, ten listed CCUS environmental management policies received extensive recognition from the participants, and about half of the participants considered that the related government departments should be responsible for environmental management as a first priority. The survey also indicates that the most trusted sources through which the survey participants obtain CCUS information are academic journals and textbooks, television, radio and newspapers, expert lectures and brochures on CCUS demonstration projects. According to the survey of public awareness of the environmental impact and management of CCUS technology in China, CCUS technology rates well for environmental benefits, but high environmental risk perceptions of CCUS lead to a lower acceptance of this carbon emissions reduction technology.     

The impact of industrial agglomeration on industrial pollutant emission: evidence from China under New Normal

The purpose of this study is to analyze the environmental pollution effects elicited by industrial agglomeration and to devise necessary changes before and after China going into the New Normal, a contemporary phase of less rapid but more sustainable economic development. An empirical model is constructed based on the Copeland–Taylor model, and empirical research is conducted using statistical panel data derived from 285 Chinese cities between 2003 and 2014. To study the relationship between industrial agglomeration and industrial pollutant emission both before and after the ‘New Normal,’ the sample data are divided into two time periods: 2003–2008 and 2009–2014. Estimated results are as follows. First, industrial agglomeration exacerbates industrial pollution levels overall although the negative environmental effect of industrial agglomeration is weakened following China’s entry into the New Normal phase of economy. Second, both the interaction term of industrial agglomeration and foreign direct investment (FDI) and the interaction term of industrial agglomeration and environmental regulation are negatively related to industrial agglomeration. These findings indicate that FDI and environmental regulation can indirectly reduce industrial pollutant emissions by way of industrial agglomeration.     

Energy sector planning using multiple-index pinch analysis

Pinch analysis was initially developed as a methodology for optimizing energy efficiency in process plants. Applications of pinch analysis applications are based on common principles of using stream quantity and quality to determine optimal system targets. This initial targeting step identifies the pinch point, which then allows complex problems to be decomposed for the subsequent design of an optimal network using insights drawn from the targeting stage. One important class of pinch analysis problems is energy planning with footprint constraints, which began with the development of carbon emissions pinch analysis; in such problems, energy sources and demands are characterized by carbon footprint as the quality index. This methodology has been extended by using alternative quality indexes that measure different sustainability dimensions, such as water footprint, land footprint, emergy transformity, inoperability risk, energy return on investment and human fatalities. Pinch analysis variants still have the limitation of being able to use one quality index at a time, while previous attempts to develop pinch analysis methods using multiple indices have only been partially successful for special cases. In this work, a multiple-index pinch analysis method is developed by using an aggregate quality index, based on a weighted linear function of different quality indexes normally used in energy planning. The weights used to compute the aggregate index are determined via the analytic hierarchy process. A case study for Indian power sector is solved to illustrate how this approach allows multiple sustainability dimensions to be accounted for in energy planning.     

Heavy metal removal from simulated wastewater using electrochemical technology: optimization of copper electrodeposition in a membraneless fluidized bed electrode

Heavy metal removal from industrial wastewaters has been intensively studied, since it is well known that they can cause severe problems to human health and aquatic life, even at very low concentrations. In this work, it was demonstrated that electrodeposition in fluidized bed electrode (FBE) can be efficiently employed to remove metal ions from solution, avoid contamination, and recover the metal. Copper electrodeposition from diluted solutions was efficiently performed using a membraneless FBE. The average current efficiency (ACE), average energy consumption (AEC), and space–time yield (AY) was optimized taking into account the operational and process variables. It was noted that for all response variables studied, the raise of supporting electrolyte concentration (C _s) contributed to improvements in the process. The operational conditions current (I) and bed expansion (E) determined the values of CE, Y, and EC under activated control, but the initial copper concentration (C ₀) determined how long the electrodeposition process will work under activated or mass transfer control, thus affecting the average values of CE, Y, and EC. Considering C ₀ of 500 mg L^?1, copper can be optimally recovered with ACE >60 %, AY >38 kg h^?1 m^?3, and AEC <4.0 kWh kg^?1 by applying the lowest I and the highest levels of E and C _s. It was concluded that the electrochemical technology using a membraneless FBE reactor is economically competitive and be applied for the treatment of wastewaters contaminated with copper or other metals.     

Taming the killer in the kitchen: mitigating household air pollution from solid-fuel cookstoves through building design

In this study, we attempt to mitigate household air pollution (HAP) through improved kitchen design. Field surveys were conducted in ten kitchens of rural western India, which were then modelled and simulated for dynamic indoor airflow network analysis. The simulated results were statistically clustered using principal component analysis and hierarchical agglomerative clustering, to construct a cumulative built environment parameter called ‘Built Factor’ for each kitchen, and subsequently a derivative matrix was developed. Categorization of better performing kitchens from this derivative matrix enabled in deriving the built parameter thresholds for a ‘better’ kitchen design. This derived kitchen showed 60 % reduction in PM2.5 peak concentration during cooking hours. The evaluation described here is essentially a “proof of concept”, that effective building design can be an alternative way to reduce HAP without the introduction of chimneys, improved cookstoves or shifting to cleaner fuel.     

Greenhouse gases mitigation by CO<Subscript>2</Subscript> reforming of methane to hydrogen-rich syngas using praseodymium oxide supported cobalt catalyst

This study focuses on the potential of hydrogen-rich syngas production by CO₂ reforming of methane over Co/Pr₂O₃ catalyst. The Co/Pr₂O₃ catalyst was synthesized via wet-impregnation method and characterized for physicochemical properties by TGA, XRD, BET, H₂-TPR, FESEM, EDX, and FTIR. The CO₂ reforming of methane over the as-synthesized catalyst was studied in a tubular stainless steel fixed-bed reactor at feed ratio ranged 0.1–1.0, temperature ranged 923–1023 K, and gas hourly space velocity (GHSV) of 30,000 h^?1 under atmospheric pressure condition. The catalyst activity studies showed that the increase in the reaction temperature from 923 to 1023 K and feed ratio from 0.1 to 1.0 resulted in a corresponding increase in the reactant’s conversion and the product’s yields. At 1023 K and feed ratio of 1.0, the activity of the Co/Pr₂O₃ catalyst climaxed with CH₄ and CO₂ conversions of 41.49 and 42.36 %. Moreover, the catalyst activity at 1023 K and feed ratio of 1.0 resulted in the production of H₂ and CO yields of 40.7 and 40.90 %, respectively. The syngas produced was estimated to have H₂:CO ratio of 0.995, making it suitable as chemical building blocks for the production of oxygenated fuel and other value-added chemicals. The used Co/Pr₂O₃ catalyst which was characterized by TPO, XRD, and SEM-EDX show some evidence of carbon formation and deposition on its surface.     

Application of fuzzy quality function deployment for sustainable design of consumer electronics products: a case study

With a steep increase in the demand for consumer electronics products, the contemporary manufacturers are committed toward sustainable development of such products. There exists a scope for developing a methodology for enabling sustainable development of consumer electronics products. In this context, fuzzy quality function deployment (QFD) approach has been presented in this article in order to prioritize relevant customer requirements, sustainability parameters and sustainability initiatives. Key influential parameters for sustainable development of consumer electronics products have been identified from the literature. In the first phase of fuzzy QFD, parameters influencing sustainable development have been prioritized in accordance with customer requirements. In the second phase, environmental design initiatives have been prioritized based on critical sustainability parameters. From phase I of fuzzy QFD, ‘reduction in environmental release’ has been found as the most significant sustainability parameter with a crisp value of 22.83, and from phase II, environmental impact assessment is proved to be the significant design method with a crisp value of 20.40. The methodology would provide a comprehensive understanding to practitioners on the interrelationships among customer requirements, sustainability parameters and environmentally benign initiatives for development of consumer electronic products. The generic model developed can be applied to most of the consumer electronics product     

Estimating vulnerability to risks: an application in a biofuel supply chain

In the present work, we propose a theoretical model to identify and prioritize risks involved in a biofuel supply chain. We adopt a set of indicators associated with determinant factors of the supply chain to identify risks that are characterized through a risk matrix. We consider the five largest world biodiesel producers and included China due to its global market importance and potential impacts of its growth on the environment and society. To determine the impacts and the probability of occurrence of risks, we use the Canberra distance, as metrics. To facilitate the analysis and interpretation, a convenient manner is to express the results in terms of matrices. To exemplify the potentiality of the scheme and for the sake of simplicity, a more comprehensive discussion is focused on the Brazilian case, restricted to the Technology and Innovation, and Integration, Logistics and Infrastructure determining factors (dimensions) of the biodiesel supply chain. Concerning these determining factors, the Brazilian biodiesel chain shows strong vulnerability when compared with developed and developing countries, despite that the evolution of the data over recent years indicates small improvements in Integration, Logistics and Infrastructure dimension. Although in this work the calculations are restricted to the Canberra distance, the present approach may be applied to other distances to compare or validate the results. This work presents a contribution to model vulnerability to risks, providing to policy makers and stakeholders a tool to design, analyze and improve sustainability system by measuring its risks. The study of the contribution of each indicator suggests corrections to be taken and which indicators should be prioritized.     

Optimization of sodium sulfide treatment of rice straw to increase the enzymatic hydrolysis in bioethanol production

The efficiency of sodium sulfide-assisted alkaline pulping for cellulose preparation from Oryza sativa L. rice straw in Vietnam for enzymatic saccharification was investigated. The response surface methodology was used for the determination of optimal technological parameters of alkaline pulping such as active alkali dosage, temperature and time. The optimal technological parameters were established to be active alkali dosage of 7%, treatment temperature of 100 °C and treatment time of 120 min. At these regimes, a maximal sugar yield of 51.8% (over dry rice straw) was obtained. It meant that the saccharification efficiency up to 97.1% could be achieved by using sodium sulfide-assisted alkaline pretreatment method. Addition of sodium sulfide into alkaline pretreatment resulted in higher sugar yield, higher level of depolymerization of lignin and less loss of cellulose. Moreover, liquid hydrolyzate after enzymatic hydrolysis was analyzed by HPLC to determine the compositions of sugar mixture. The fiber morphology in pretreated biomass solid was also revealed by SEM.     

How can Cleaner Production practices contribute to meet ISO 14001 requirements? Critical analysis from a survey with industrial companies

The companies’ needs to adopt changes in their way of production to maximize the environmental performance required by their stakeholders, and at the same time, to maximize their economic and market performance, have made them seek for environmental strategies and certifications. In this sense, the Cleaner Production and the Environmental Management System based on ISO 14001 have been, respectively, presented, since the main objective of this research is to identify and analyze Cleaner Production contributions to comply with ISO 14001 requirements. For such, a survey research has been carried out in Brazilian industrial companies certified by ISO 14001. We have identified the main performance factors by leading practices and variables of Cleaner Production that contribute to the compliance with the standard requirements by companies. Thus, it has been noted that Cleaner Production is an important strategy for the preparation of companies for certification as well as for improving their environmental performance.