A New Slip Frequncy Detector of an Induction Motor Utilizing Rotor Slot Harmonics

A method to detect slip frequency from rotor slot harmonics of a three-phase squirrel-cage induction motor is proposed. The rotor slot harmonic voltage Is obtained by summing the three phase voltages, and after being sampled with a multiple of the stator frequency, it is changed into slip frequency waves, from which a voltage proportional to the slip frequency is obtained. Sophisticated sampling techniques allow elimination of the third harmonic voltage induced in the sum of the three-phase voltages and also allow reduction of time constant of the slip frequency detector. Expenmental results show that the slip frequency detector has a good linearity in the range of slip frequency of about -50 to +30 percent of the stator frequency.     

Artificial reconstruction of two cryptic angucycline antibiotic biosynthetic pathways

Genome-sequencing projects have revealed that Streptomyces bacteria have the genetic potential to produce considerably larger numbers of natural products than can be observed under standard laboratory conditions. Cryptic angucycline-type aromatic polyketide gene clusters are particularly abundant. Sequencing of two such clusters from Streptomyces sp. PGA64 and H021 revealed the presence of several open reading frames that could be involved in processing the basic angucyclic carbon skeleton. The pga gene cluster contains one putative FAD-dependant monooxygenase (pgaE) and a putatively bifunctional monooxygenase/short chain alcohol reductase (pgaM), whereas the cab cluster contains two similar monooxygenases (cabE and cabM) and an independent reductase (cabV). In this study we have reconstructed the biosynthetic pathways for aglycone synthesis by cloning and sequentially expressing the angucycline tailoring genes with genes required for the synthesis of the unmodified angucycline metabolite-UWM6-in Streptomyces lividans TK24. The expression studies unequivocally showed that, after the production of UWM6, the pathways proceed through the action of the similar monooxygenases PgaE and CabE, followed by reactions catalysed by PgaM and CabMV. Analysis of the metabolites produced revealed that addition of pgaE and cabE genes directs both pathways to a known shunt product, rabelomycin, whereas expression of all genes from a given pathway results in the production of the novel angucycline metabolites gaudimycin A and B. However, one of the end products is most probably further modified by endogenous S. lividans TK24 enzymes. These experiments demonstrate that genes that are either inactive or cryptic in their native host can be used as biosynthetic tools to generate new compounds.     

Side-chain type benzoxazine-functional cellulose via click chemistry

A side-chain type benzoxazine-functional cellulose has been developed using click chemistry via the reaction of ethynyl-monofunctional benzoxazine monomer and azide-functional cellulose. The synthesis, crosslinking, and thermal properties of the benzoxazine-functional cellulose are studied by NMR, FTIR, DSC, and TGA. The crosslinking reaction of the benzoxazine side-chain unusually takes place at low-temperatures in comparison to an ordinary benzoxazine resins. Upon crosslinking, the polymer shows high char yield of 40%, which is a marked improvement from a mere 4% of the unfunctionalized cellulose. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

陶瓷色料中添加发色离子的状态与反应

固体滴定法是研究固溶量的一种新方法。本实验选择Mn-Al2O3色料,给其中加入Cr2O3,通过测定反射光谱f(R)、晶格常数、电子自旋共振（ESR）,并计算晶格常数,分别得到加入Cr2O3前后的Mn-Al2O3的反射光谱与晶格常数的变化,依据该数据来推定着色离子Mn的固溶量及化学状态。为研究Mn-Al2O3红色料中Mn的固溶量,给其中加入Cr2O3,它使Mn-Al2O3红的色调发生变化,在此过程中发生如下反应：Cr^3 Mn^3 →Cr^4 Mn^2 ,Mn-Al2O3红色料在反射光谱520nm处有吸收峰值,给其中添加Cr2O3后峰值减小,用Cr^3 的固溶量（即Cr2O3的添加量）和峰值Δf(R)作图并延伸图线至Δf(R)=0点,此点对应的Cr2O3值即为Mn^3 的固溶量（Mn2O3的浓度）。实验证明,利用固体滴定法在一定精度范围内测定发色元素的固溶量取得一定程度成功。锰红色料中的发色离子状态为Mn^3 ,添加Cr2O3后,Cr能置换Mn-Al2O3中的Mn。铬是以Cr^3 化学状态固溶到Al2O3中的。     

采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

Thermal decomposition processes in aromatic amine-based polybenzoxazines investigated by TGA and GC-MS

Three different aromatic amine-based polybenzoxazines are subjected to thermal decomposition in a thermogravimetric analyzer. The degradation products, which are volatile compounds evaporating out of the furnace as gases, are trapped and analyzed further by a gas chromatograph which is coupled with a mass selective detector (GC-MS). All the degradation products are separated by GC and come out at different retention times, as seen in the total ion chromatogram. All the compound's mass are selectively identified by MS. The chromatograms are divided into two regions; the low column temperature region containing low molecular weight and highly volatile compounds, and the high column temperature region containing higher molecular weight and less volatile compounds. The evolved gas analysis performed by GC-MS allows us to identify the molecular weight and also the structure of the volatiles. This information is then used to illustrate the processes occurring during the thermal decomposition of aromatic amine-based polybenzoxazines.     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

An empirical approach for structure-based prediction of carbohydrate-binding sites on proteins

A computer program system was developed to predict carbohydrate-bindingsites on three-dimensional (3D) protein structures. The programssearch for binding sites by referring to the empirical rulesderived from the known 3D structures of carbohydrate–proteincomplexes. A total of 80 non-redundant carbohydrate–proteincomplex structures were selected from the Protein Data Bankfor the empirical rule construction. The performance of theprediction system was tested on 50 known complex structuresto determine whether the system could detect the known bindingsites. The known monosaccharide-binding sites were detectedamong the best three predictions in 59% of the cases, whichcovered 69% of the polysaccharide-binding sites in the targetproteins, when the performance was evaluated by the overlapbetween residue patches of predicted and known binding sites. Received April 24, 2003; revised June 2, 2003; accepted June 10, 2003.     

Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic,alkaline, and phosphate‐buffered solutions

Attempts were carried out to enhance the surface hydrophilicity of poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA) film, utilizing enzymatic, alkaline, and autocatalytic hydrolyses in a proteinase K/Tris–HCL buffered solution system (37°C), in a 0.01N NaOH solution (37°C), and in a phosphate‐buffered solution (100°C), respectively. Moreover, its chain‐scission mechanisms in these different media were studied. The advancing contact‐angle (θ_a) value of the amorphous‐made PLLA film decreased monotonically with the hydrolysis time from 100° to 75° and 80° without a significant molecular weight decrease, when enzymatic and alkaline hydrolyses were continued for 60 min and 8 h, respectively. In contrast, a negligible change in the θ_a value was observed for the PLLA films even after the autocatalytic hydrolysis was continured for 16 h, when their bulk M_n decreased from 1.2 × 10⁵ to 2.2 × 10⁴ g mol^?1 or the number of hydrophilic terminal groups per unit weight increased from 1.7 × 10^?5 to 9.1 × 10^?5 mol g^?1. These findings, together with the result of gravimetry, revealed that the enzymatic and alkaline hydrolyses are powerful enough to enhance the practical surface hydrophilicity of the PLLA films because of their surface‐erosion mechanisms and that its practical surface hydrophilicity is controllable by varying the hydrolysis time. Moreover, autocatalytic hydrolysis is inappropriate to enhance the surface hydrophilicity, because of its bulk‐erosion mechanism. Alkaline hydrolysis is the best to enhance the hydrophilicity of the PLLA films without hydrolysis of the film cores, while the enzymatic hydrolysis is appropriate and inappropriate to enhance the surface hydrophilicity of bulky and thin PLLA materials, respectively, because a significant weight loss occurs before saturation of θ_a value. The changes in the weight loss and θ_a values during hydrolysis showed that exo chain scission as well as endo chain scission occurs in the presence of proteinase K, while in the alkaline and phosphate‐buffered solutions, hydrolysis proceeds via endo chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1628–1633, 2003