Sleep deprivation in adolescents and adults: Changes in affect.

The present study investigated the impact of sleep deprivation on several aspects of affective functioning in healthy participants selected from three different developmental periods: early adolescence (ages 10–13), midadolescence (ages 13–16), and adulthood (ages 30–60). Participants completed an affective functioning battery under conditions of sleep deprivation (a maximum of 6.5 hours total sleep time on the first night followed by a maximum of 2 hours total sleep time on the second night) and rest (approximately 7–8 hours total sleep time each night for two consecutive nights). Less positive affect was observed in the sleep-deprived, compared to rested, condition. This effect held for 9 of the 12 positive affect items on the PANAS-C. Participants also reported a greater increase in anxiety during a catastrophizing task and rated the likelihood of potential catastrophes as higher when sleep deprived, relative to when rested. Early adolescents appraised their main worry as more threatening when sleep deprived, relative to when rested. These results support and extend previous research underscoring the adverse affective consequences of sleep deprivation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Formative e-assessment: Practitioner cases

This paper reports on one aspect of the Joint Information Systems Committee (JISC)-funded project ‘Scoping a vision of formative e-assessment’, namely on cases of formative e-assessment developed iteratively with the UK education practitioner community. The project, which took place from June 2008 to January 2009, aimed to identify current theories and practices relating to formative assessment of learning where technologies play a key role. The project aimed to scope the ‘domain’ of formative e-assessment, by developing cases of practice and identifying key formative processes within them, which are affected by the use of technologies. From this analysis, patterns were extracted to inform future software design. A discussion of the key issues emerging from the review of the literature on formative e-assessment, a full account of the project methodology – the design pattern methodology – as well as a critical discussion of the findings – namely the patterns and the role of technology – are the focus of a separate paper (see Daly, Pachler, Mor, and Mellar (in press). This paper documents how cases of formative e-assessment were developed during the project by a collaborative methodology involving practitioners from a range of post-16 education contexts. The cases were analysed with reference to key theoretical perspectives on formative assessment, particularly the work of Black and Wiliam (2009). In addition, Laurillard’s Conversational Framework (2002, 2007) was used to locate practices of formative assessment within a wider concept of learning and teaching involving technologies, although a detailed discussion of the latter is not within the scope of this paper¹.     

A rapid screening multi-electrode method for the evaluation of corrosion inhibitors

A method is described for the rapid screening of water-soluble corrosion inhibitors, which involves a fixed potential being applied between identical electrodes while immersed in an inhibitor solution. The current flowing between the electrodes is measured and the electrochemical response of the anodic and cathodic reactions, with and without the inhibitor, is then compared. The incorporation of nine pairs of metallic wires (Al, AA2024, AA7075, Fe, mild steel, SS316, Mg, Mg-AZ31 and Zn) into a single assembly enables the effect of inhibitors on different metals to be assessed rapidly. The technique is sensitive to both anodic and cathodic inhibition mechanisms and can provide information on the concentration dependency of inhibitors.This paper provides an electrochemical analysis of the method and demonstrates its application using several soluble chemical species (potassium dichromate, cerium nitrate, sodium vanadate, sodium diphosphate, sodium octanoate) on AA2024-T3 and mild steel at 10⁻² and 10⁻⁴ M and correlates the results with those obtained by conventional potentiodynamic polarization analysis. The errors in the approach were higher for poor inhibitors, however, efficient corrosion inhibitors have decreased experimental errors, thus, ensuring that promising inhibitor candidates are not overlooked.     

Effect of thymol or diphenyliodonium chloride on performance, gut fermentation characteristics, and campylobacter colonization in growing swine

Food producing animals can be reservoirs of Campylobacter, a leading bacterial cause of human foodborne illness. Campylobacter spp. utilize amino acids as major carbon and energy substrates, a process that can be inhibited by thymol and diphenyliodonium chloride (DIC). To determine the effect of these potential additives on feed intake, live weight gain, and gut Campylobacter levels, growing pigs were fed standard grower diets supplemented with or without 0.0067 or 0.0201% thymol or 0.00014 or 0.00042% DIC in a replicated study design. Diets were offered twice daily for 7 days, during which time daily feed intake (mean ± SEM, 2.39 ± 0.06 kg day(-1)) and daily gain (0.62 ± 0.04 kg day(-1)) were unaffected (P > 0.05) by treatment. Pigs treated with DIC but not thymol tended to have lower rectal Campylobacter levels (P ～ 0.07) (5.2 versus 4.2 and 4.4 log CFU g(-1) rectal contents for controls and 0.00014% DIC and 0.00042% DIC, respectively; SEM ～ 0.26). However, DIC or thymol treatments did not affect (P > 0.05) ileal or cecal Campylobacter (1.6 ± 0.17 and 4.5 ± 0.26 log CFU g(-1), respectively), cecal total culturable anaerobes (9.8 ± 0.10 log CFU g(-1)), or accumulations of major fermentation end products within collected gut contents. These results suggest that thymol and DIC were appreciably absorbed, degraded, or otherwise made unavailable in the proximal alimentary tract and that encapsulation technologies will likely be needed to deliver effective concentrations of these compounds to the lower gut to achieve in vivo reductions of Campylobacter.     

Polybrominated diphenyl ethers in U.S. sewage sludges and biosolids: temporal and geographical trends and uptake by corn following land application

Polybrominated diphenyl ethers (PBDEs) have been used extensively to flame-retard polymers and textiles. These persistent chemicals enter wastewater streams following manufacture, use, and disposal, concentrating in the settled solids during treatment. Land application of stabilized sewage sludge (known as biosolids) can contribute PBDEs to terrestrial systems. Monitoring sludge/biosolids contaminant burdens may be valuable in revealing trends in societal chemical usage and environmental release. In archived Chicago area sludges/biosolids from 1975 to 2008, penta-BDE concentrations increased and then plateaued after about 2000. Penta-BDE manufacture in the United States ended in December 2004. Deca-BDE concentrations in biosolids rose from 1995 to 2008, doubling on a 5-year interval. Evaluation of U.S. Environmental Protection Agency Targeted National Sewage Sludge Survey data from 2006 to 2007 revealed highest penta-BDE biosolids levels from western and lowest from northeastern wastewater treatment plants (2120 and 1530 μg/kg, respectively), consistent with patterns reported in some recent indoor dust and human blood studies. No significant regional trends were observed for deca-BDE concentrations. Congener patterns in contemporary Chicago biosolids support the contention that BDE-209 can be dehalogenated to less brominated congeners. Biosolids application on agricultural fields increased PBDE soil concentrations. However, corn grown thereon did not exhibit measurable PBDE uptake; perhaps due to low bioavailability of the biosolids-associated flame retardants.     

Computational fluid dynamic investigation of liquid rack cooling in data centres

Relying on thermal air management in a data centre is becoming less effective as heat densities from the Information Technology (IT) equipment continue to rise. Direct liquid cooling is more efficient at transferring the waste heat, but requires liquid loops passing as close as possible to the heat source. A new Computational Fluid Dynamics (CFD) strategy is developed for data centre scenarios where a liquid loop heat exchanger is attached at the rear of server racks (back doors), which can avoid the need to separate the cold and hot air streams in traditional hot/cold aisle arrangements. The effectiveness of additional fans in the back door heat exchangers is investigated using the three-dimensional CFD model of a simplified three-aisle, six-rack data centre configuration.     

Effect of ore quality on non-aqueous oil sand extraction performance

Current commercial aqueous based extraction processes are energy and greenhouse gas (GHG) intensive and require large tailings ponds. Non-aqueous extraction (NAE) of bitumen from mineable oil sands is an alternative that eliminates tailings ponds with potentially lower energy requirements and GHG emissions. The economics of the NAE process depend partly on the impact of ore quality on bitumen recovery and product quality (low water and solids content). It has been claimed that NAE performance is insensitive to the quality (bitumen content) of the oil sand ores. However, the available data are ambiguous because different extraction methods and solvents were used in different studies and, in many cases, a limited range of ore qualities was examined. In this study, bitumen was extracted from eight ores of different quality with cyclohexane using a multistage method equivalent to a countercurrent process with a solvent/ore ratio of 0.67 w/w. The bitumen recovery and the water and solids content of the product bitumen were determined for each ore. It was found that bitumen recovery correlated negatively to clay content of the ore. The loss of recovery was attributed to bitumen adsorption on clays. The product quality was insensitive to the ore quality and instead depended on the density of the fluid medium, as expected with a centrifuge-based separation method. The recovery and product quality from the NAE method were similar to those from aqueous extractions.     

A Path to High-Efficiency Optical Coupling for HIRMES

The high-resolution mid-infrared spectrometer (HIRMES) under development for Stratospheric Observatory for Infrared Astronomy is an instrument operating in the 25–122 μm spectral range with a spectral resolution R?=?Δλ/λ?~?100,000 and has two absorber-coupled transition edge sensor bolometric detector focal planes. We have developed novel NbTiN low-stress absorber coatings which have the required optical impedance across the HIRMES operating band. The low intrinsic stress of these coatings allow for a peak-to-valley corrugation amplitude?<?5 μm of the 450 nm thick, 1.4 mm?×?1.7 mm detector pixels. Furthermore, these coatings have a superconducting transition temperature?~?10 K, which allows them to simultaneously serve as an absorber in the desired signal band and a rejection filter at long wavelengths. This attribute makes them especially attractive for ultrasensitive absorber-coupled bolometric detector applications, because it helps in controlling the optical loading from out-of-band radiation. We also discuss a novel method for integrating a wedged-reflective absorber termination to the detector array.     

Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends I. Experimental

Carbon fibre composites are being widely considered for many classes of heavily loaded components. A common feature of such components is the need to introduce local or global loads into the composite structure. The use of adhesive bonding rather than mechanical fasteners offers the potential for reduced weight and cost. However, such bonded joints must be shown to behave in a predictable and reliable way. A major aspect of this is to demonstrate that the progress of cracks through the bonds is well understood. The work presented here illustrates one possibility for establishing a measure of control over that crack propagation.