A novel robust FPGA routing switch box design for ultra low power applications

Fabrication cost of application-specific integrated circuits (ASICs) is exponentially rising in deep submicron region due to rapidly rising non-recurring engineering cost. Field programmable gate arrays (FPGAs) provide an attractive alternative to ASICs but consume an order of magnitude higher power. There is a need to explore ways of reducing FPGA power consumption so that they can also be employed in ultra low power (ULP) applications instead of ASICs. Subthreshold region of operation is an ideal choice for ULP low-throughput FPGAs. The routing of an FPGA consumes most of the chip area and primarily determines the circuit delay and power consumption. There is a need to design moderate-speed ULP routing switches for subthreshold FPGA. This article proposes a novel subthreshold FPGA routing switch box (SB) that utilises the leakage voltage through transistor as biasing voltage which shows 69%, 61.2% and 30% improvement in delay, power delay product and delay variation, respectively, over conventional routing SB.     

Heavily doped silicon:A potential replacement of conventional plasmonic metals

The plasmonic property of heavily doped p-type silicon is studied here.Although most of the plasmonic devices use metal-insulator-metal(MIM)waveguide in order to support the propagation of surface plasmon polaritons(SPPs),metals that possess a number of challenges in loss management,polarization response,nanofabrication etc.On the other hand,heavily doped p-type silicon shows similar plasmonic properties like metals and also enables us to overcome the challenges pos-sessed by metals.For numerical simulation,heavily doped p-silicon is mathematically modeled and the theoretically obtained re-lative permittivity is compared with the experimental value.A waveguide is formed with the p-silicon-air interface instead of the metal-air interface.Formation and propagation of SPPs similar to MIM waveguides are observed.     

PAPR Reduction in OFDM Systems Based on Autoregressive Filtering

Orthogonal frequency division multiplexing (OFDM) has a very high peak-to-average power ratio (PAPR) that causes a severe nonlinear distortion in practical hardware implementation of high power amplifiers (HPA). In this article, a new PAPR reduction method is proposed based on autoregressive (AR) error filtering. This method proposes the use of signal whitening property of error filtering as a preprocessing step to remove the predictable content of stationary stochastic processes which can reduce the autocorrelation of input data sequences and is shown to be a very effective solution for the PAPR problem in OFDM systems. It is shown that the proposed method can achieve a significant reduction in PAPR without degrading the error performance or power spectral levels. It is also shown that the proposed method is applicable to any modulation scheme and can work for any number of subcarriers under both additive white Gaussian noise and wireless Rayleigh fading channel.     

MMSE estimator for speech enhancement considering the constructive and destructive interference of noise

A new minimum mean square error (MMSE) estimator for discrete cosine transform (DCT) domain speech enhancement considering the two state possibilities of signal and noise DCT coefficients, the constructive and destructive interference, is proposed. Given proper identification of these events are possible, an optimum non-linear MMSE estimator can be derived considering the conditional events. Compared to the previously reported dual-gain multiplicative filters, the proposed estimator demonstrates superior theoretical and experimental performance with respect to mean square error (MSE) improvement and other objective quality measures.     

A medium access protocol exploiting multiuser-detection in CDMA ad-hoc networks

A new medium access protocol which exploits the physical layer capability of multiuser detection is proposed to help in improving the throughput/delay performance of ad-hoc networks. When more than one node has packets buffered for a common node in the neighborhood, all such nodes can simultaneously transmit their packets to the common receiver after reserving their surrounding channel. This is achieved in our protocol by extending the (sender-initiated) CSMA/CA collision avoidance framework by the receiver-initiated medium access technique and incorporating the transmission power control. We analyze the improvement in the throughput that can be achieved over the basic sender-initiated collision avoidance protocol in the network. Since the throughput improvement via multi-packet reception is influenced by the network layer activity as well, the performance of our protocol rolls back to that of the basic sender-initiated protocol in case of no coordination from the network layer. For the evaluation of performance of our protocol we simulate ad-hoc networks for different network topologies and traffic configurations. We observe the scheme to be capable in significantly improving the throughput/delay performance of the network.     

Highlighting the base zone effect on the compression and recovery properties of the rugs with innovating Double-Base Persian rug

This paper investigates the compression and recovery properties of the rugs by highlighting the base zone effect. To fulfill this purpose, a new type of rug named Double-Base Persian Rug was prepared. In the new rug, the warping was done such that we have two sets of warp sheets (back base and front base warp yarns). So that, a gap between these two bases were created that could be filled with various types of fillers. A total of seven rug samples; a conventional Persian rug as the base of comparison and six new types of rug samples were produced. Then, the compression and recovery properties of the rug samples were investigated by static loading test. Generally, the results indicated that the rug base structure and the inherent characteristics of the materials used in the rug base as a filler positive affect the rug compression and recovery properties.     

One-step purification of lactoperoxidase from bovine milk by affinity chromatography

Sulphanilamide was determined to be a new inhibitor of lactoperoxidase (LPO) with an IC₅₀ of 0.848.10⁻⁵ M. The K_i for sulphanilamide was determined to be 3.57.10⁻⁵ M and sulphanilamide showed competitive inhibition, which makes it a suitable ligand for constructing a Sepharose 4B-l-tyrosine affinity matrix. The affinity matrix was synthesised by coupling sulphanilamide as the ligand and l-tyrosine as the spacer arm to a cyanogen bromide (CNBr)-activated-Sepharose 4B matrix. Lactoperoxidase was purified 409-fold from the synthesized affinity matrix in a single step, with a yield of 62.3% and a specific activity of 40.9 EU/mg protein. The enzyme activity was measured using ABTS as a chromogenic substrate (pH 6.0). The degree of LPO purification was monitored by SDS–PAGE and its R_z (A₄₁₂/A₂₈₀) value. The R_z value for the purified LPO was found to be 0.7. Maximum binding was achieved and K_m and V_max values were determined.