Piezoelectric properties of low temperature sintering in Pb(Zr,Ti)O3–Pb(Zn,Ni)1/3Nb2/3O3 ceramics for piezoelectric transformer applications

In this study, in order to develop low-temperature sintering ceramics for a multilayer piezoelectric transformer application, we explored CuO and Bi₂O₃ as sintering aids at low temperature (900 °C) sintering condition for Sb, Li and Mn-substituted 0.8Pb(Zr_0.48Ti_0.52)O₃–0.16Pb(Zn_1/3Nb_2/3)O₃–0.04Pb(Ni_1/3Nb_2/3)O₃ ceramics. These substituted ceramics have excellent piezoelectric and dielectric properties such as d₃₃  347 pC/N, k_p  0.57 and Q_m  1469 when sintered at 1200 °C. The addition of CuO decreased the sintering temperature through the formation of a liquid phase. However, the piezoelectric properties of the CuO-added ceramics sintered below 900 °C were lower than the desired values. The additional Bi₂O₃ resulted in a significant improvement in the piezoelectric properties. The composition Sb, Li and Mn-substituted 0.8Pb(Zr_0.48Ti_0.52)O₃–0.16Pb(Zn_1/3Nb_2/3)O₃–0.04Pb(Ni_1/3Nb_2/3)O₃ + 0.5 wt% CuO + 0.5 wt% Bi₂O₃ showed the value of k_p = 0.56, Q_m = 1042 (planar mode), d₃₃ = 350 pC/N, when it was sintered at 900 °C for 2 h. These values indicated that the newly developed composition might be suitable for multilayer piezoelectric transformer application.     

Nanoenergetic Composites of CuO Nanorods,Nanowires, and Al‐Nanoparticles

This paper reports on the synthesis of the nanoenergetic composites containing CuO nanorods and nanowires, and Al‐nanoparticles. Nanorods and nanowires were synthesized using poly(ethylene glycol) templating method and combined with Al‐nanoparticles using ultrasonic mixing and self‐assembly methods. Poly(4‐vinylpyridine) was used for the self‐assembly of Al‐nanoparticles around the nanorods. At the optimized values of equivalence ratio, sonication time, and Al‐particle size, the combustion wave speed of 1650 m s⁻¹ was obtained for the nanorods‐based energetics. For the composite of nanowires and Al‐nanoparticles the speed was increased to 1900 m s⁻¹. The maximum combustion wave speed of 2400 m s⁻¹ was achieved for the self‐assembled composite, which is the highest known so far among the nanoenergetic materials. It is possible that in the self‐assembled composites, the interfacial contact between the oxidizer and fuel is higher and resistance to overall diffusional process is lower, thus enhancing the performance.     

Surface Modification of Ready-to-Use Hollow Fiber Ultrafiltration Modules for Oil/Water Separation

Reusing wastewater from oil-related industries is becoming increasingly important, especially in water-stressed oil-producing countries. Before oily wastewater can be discharged or reused, it must be properly treated, e.g., by membrane-based processes like ultrafiltration. A major issue of the applied membranes is their high fouling propensity. This paper reports on mitigating fouling inside ready-to-use ultrafiltration hollow-fiber modules used in a polishing step in oil/water separation. For this purpose, in-situ polyzwitterionic hydrogel coating was applied. The membrane performance was tested with oil nano-emulsions using a mini-plant system. The main factors influencing fouling were systematically investigated using statistical design of experiments.     

Experimental and Established Oximes as Pretreatment before Acute Exposure to Azinphos-Methyl

Poisoning with organophosphorus compounds (OPCs) represents an ongoing threat to civilians and rescue personal. We have previously shown that oximes, when administered prophylactically before exposure to the OPC paraoxon, are able to protect from its toxic effects. In the present study, we have assessed to what degree experimental (K-27; K-48; K-53; K-74; K-75) or established oximes (pralidoxime, obidoxime), when given as pretreatment at an equitoxic dosage of 25% of LD₀₁, are able to reduce mortality induced by the OPC azinphos-methyl. Their efficacy was compared with that of pyridostigmine, the only FDA-approved substance for such prophylaxis. Efficacy was quantified in rats by Cox analysis, calculating the relative risk of death (RR), with RR=1 for the reference group given only azinphos-methyl, but no prophylaxis. All tested compounds significantly (p ≤ 0.05) reduced azinphos-methyl-induced mortality. In addition, the efficacy of all tested experimental and established oximes except K-53 was significantly superior to the FDA-approved compound pyridostigmine. Best protection was observed for the oximes K-48 (RR = 0.20), K-27 (RR = 0.23), and obidoxime (RR = 0.21), which were significantly more efficacious than pralidoxime and pyridostigmine. The second-best group of prophylactic compounds consisted of K-74 (RR = 0.26), K-75 (RR = 0.35) and pralidoxime (RR = 0.37), which were significantly more efficacious than pyridostigmine. Pretreatment with K-53 (RR = 0.37) and pyridostigmine (RR = 0.52) was the least efficacious. Our present data, together with previous results on other OPCs, indicate that the experimental oximes K-27 and K-48 are very promising pretreatment compounds. When penetration into the brain is undesirable, obidoxime is the most efficacious prophylactic agent already approved for clinical use.     

Resilience-aware design of interconnected supply chain networks with application to water-energy nexus

The effects of natural disasters, pandemic-induced lockdowns, and other disruptions often cascade across networks. In this work, we use minimum cost of resilience (MCOR) and operation-based resilience metrics to quantify network performance against single-connectivity failures and identify critical connections in interconnected networks. MCOR corresponds to the minimum additional infrastructure investment that is required to achieve a certain level of resilience. To guarantee MCOR, we incorporate the metrics in a multi-scenario mixed-integer linear program (MILP) that accounts for resilience in the design phase of interconnected networks. The goal is to obtain optimal generation and transportation capacities with flexible operation under all single-connectivity disruption scenarios. We demonstrate the applicability of our resilience-aware framework on a water-energy nexus (WEN) example focusing on grass-root design and retrofitting. We further apply the framework to analyze a regional WEN and observe that it is possible to achieve “full” resilience in the expense of additional regional investments.     

UV-shielding by a polyurethane/f-Oil fly ash-CeO2 protective coating

A waste material called oil fly ash (OFA) was acid-functionalized, yielding f-OFA-COOH, which was then reacted with cerium oxide (CeO₂) to make CeO₂-functionalized OFA, or f-OFA-CeO₂. Pristine OFA and f-OFA-CeO₂ were used to make waterborne polyurethane (WBPU) dispersions, referred to as WBPU/OFA and WBPU/f-OFA-CeO₂, respectively, with defined OFA and f-OFA-CeO₂ content. All the dispersions were applied to mild steel as organic coatings to evaluate their protective properties, such as their hydrophobicity, adhesive strength and UV-shielding resistance. These protective properties varied based on the OFA and f-OFA-CeO₂ content. The highest water contact angle, minimum water swelling and maximum adhesive strength were found using WBPU/f-OFA-CeO₂-20 coating (using 2.00 wt% f-OFA-CeO₂), which also showed the maximum ultraviolet (UV) absorption via UV–vis spectroscopy analysis. This UV shielding result also matched field test results, as that coating was found to exhibit the lowest UV degradation near a marine atmosphere, as shown by X-ray photoelectron spectroscopy (XPS) analysis. The least affected hydrophobicity was also recorded for the sample with the WBPU/f-OFA-CeO₂-20 coating.     

Visualizing Extracellular Vesicles and Their Function in 3D Tumor Microenvironment Models

Extracellular vesicles (EVs) are cell-derived nanostructures that mediate intercellular communication by delivering complex signals in normal tissues and cancer. The cellular coordination required for tumor development and maintenance is mediated, in part, through EV transport of molecular cargo to resident and distant cells. Most studies on EV-mediated signaling have been performed in two-dimensional (2D) monolayer cell cultures, largely because of their simplicity and high-throughput screening capacity. Three-dimensional (3D) cell cultures can be used to study cell-to-cell and cell-to-matrix interactions, enabling the study of EV-mediated cellular communication. 3D cultures may best model the role of EVs in formation of the tumor microenvironment (TME) and cancer cell-stromal interactions that sustain tumor growth. In this review, we discuss EV biology in 3D culture correlates of the TME. This includes EV communication between cell types of the TME, differences in EV biogenesis and signaling associated with differing scaffold choices and in scaffold-free 3D cultures and cultivation of the premetastatic niche. An understanding of EV biogenesis and signaling within a 3D TME will improve culture correlates of oncogenesis, enable molecular control of the TME and aid development of drug delivery tools based on EV-mediated signaling.     

The Evolving Role of Fetuin-A in Nonalcoholic Fatty Liver Disease: An Overview from Liver to the Heart

Nonalcoholic fatty liver disease (NAFLD) is strongly associated to the features of metabolic syndrome which can progress to cirrhosis, liver failure and hepatocellular carcinoma. However, the most common cause of mortality in people with NAFLD is not liver-related but stems from atherosclerotic cardiovascular disease (CVD). The prevalence of NAFLD is on the rise, mainly as a consequence of its close association with two major worldwide epidemics, obesity and type 2 diabetes (T2D). The exact pathogenesis of NAFLD and especially the mechanisms leading to disease progression and CVD have not been completely elucidated. Human fetuin-A (alpha-2-Heremans Schmid glycoprotein), a glycoprotein produced by the liver and abundantly secreted into the circulation appears to play a role in insulin resistance, metabolic syndrome and inflammation. This review discusses the links between NAFLD and CVD by specifically focusing on fetuin-A’s function in the pathogenesis of NAFLD and atherosclerotic CVD.     

Effects of residence time and heating rate on gasification of petroleum residue

Gasification of petroleum residue has been considered as the potential technology due to the advantages of converting the liquid fuels into syngas using partial oxidation. In this paper, we developed a one-dimensional kinetic model to simulate the effects of residence time and heating rate on the gasification characteristics. Results showed that gasification under higher heating rate improves the hydrogen yield and carbon conversion efficiency. It was also found that the residence time plays a major role in the process; higher residence time improves the hydrogen yield and gasification efficiency. The model was validated against the reported data and found to be in good agreement.