Infrared Spectroscopy-Based Chemometric Analysis for Lard Differentiation in Meat Samples

One of the most pressing concerns for the consumer market is the detection of adulteration in meat products due to their preciousness. The rapid and accurate identification mechanism for lard adulteration in meat products is highly necessary, for developing a mechanism trusted by consumers and that can be used to make a definitive diagnosis. Fourier Transform Infrared Spectroscopy (FTIR) is used in this work to identify lard adulteration in cow, lamb, and chicken samples. A simplified extraction method was implied to obtain the lipids from pure and adulterated meat. Adulterated samples were obtained by mixing lard with chicken, lamb, and beef with different concentrations (10%–50% v/v). Principal component analysis (PCA) and partial least square (PLS) were used to develop a calibration model at 800–3500 cm⁻¹. Three-dimension PCA was successfully used by dividing the spectrum in three regions to classify lard meat adulteration in chicken, lamb, and beef samples. The corresponding FTIR peaks for the lard have been observed at 1159.6, 1743.4, 2853.1, and 2922.5 cm⁻¹, which differentiate chicken, lamb, and beef samples. The wavenumbers offer the highest determination coefficient R² value of 0.846 and lowest root mean square error of calibration (RMSEC) and root mean square error prediction (RMSEP) with an accuracy of 84.6%. Even the tiniest fat adulteration up to 10% can be reliably discovered using this methodology.     

Harmonic modification and data adaptive filtering based approach to robust pitch estimation

A novel and robust pitch estimation method is presented in this paper. The basic idea is to reshape the speech signal using a combination of the dominant harmonic modification (DHM) and data adaptive time domain filtering techniques. The noisy speech signal is filtered within the ranges of fundamental frequencies to obtain the pre-filtered signal (PFS). The dominant harmonic (DH) of the PFS is determined and enhanced its amplitude. Normalized autocorrelation function (NACF) is applied to that modified signal. Then empirical mode decomposition (EMD) based data adaptive time domain filtering is applied to the NACF signal. Partial reconstruction is performed in EMD domain. The pitch period is determined from the partially reconstructed signal. The experimental results show that the proposed method performs better than the other recently developed methods for noisy and clean speech signals in terms of gross and fine pitch errors.     

Intelligently tuned wavelet parameters for GPS/INS error estimation

This paper presents a new algorithm for de-noising global positioning system (GPS) and inertial navigation system (INS) data and estimates the INS error using wavelet multi-resolution analysis algorithm (WMRA)-based genetic algorithm (GA) with a well-designed structure appropriate for practical and real time implementations because of its very short training time and elevated accuracy. Different techniques have been implemented to de-noise and estimate the INS and GPS errors. Wavelet de-noising is one of th...     

The performance of multiwavelets based OFDM system under different channel conditions

In wireless communication reception, the reliability of orthogonal frequency division multiplexing (OFDM) is limited because of the time-varying nature of the channel. This causes inter-carrier interference (ICI) and increases inaccuracies in channel tracking. This can effectively be avoided at the cost of power loss and bandwidth expansion by inserting a cyclic prefix guard interval before each block of parallel data symbols. However, this guard interval decreases the spectral efficiency of the OFDM system as the corresponding amount. Recently, it was found that based on Haar-orthonormal wavelets, discrete wavelet-based OFDM (DWT-OFDM) is capable of reducing the inter symbol interference (ISI) and ICI, which are caused by the loss in orthogonality between the carriers. DWT-OFDM can also support much higher spectrum efficiency than discrete Fourier-based OFDM (DFT-OFDM). In this paper the DFT-OFDM is replaced by Multiwavelets OFDM (DMWT-OFDM) in order to further reduce the level of interference and increase spectral efficiency. It is found that proposed Multiwavelet design achieves much lower bit error rates, increases signal to noise power ratio (SNR), and can be used as an alternative to the conventional OFDM. The proposed OFDM system was modeled tested, and its performance was found under different channel conditions.     

A new mathematical programming approach to multi-group classification problems

In this paper we introduce a goal programming formulation for the multi-group classification problem. Although a great number of mathematical programming models for two-group classification problems have been proposed in the literature, there are few mathematical programming models for multi-group classification problems. Newly proposed multi-group mathematical programming model is compared with other conventional multi-group methods by using different real data sets taken from the literature and simulation data. A comparative analysis on the real data sets and simulation data shows that our goal programming formulation may suggest efficient alternative to traditional statistical methods and mathematical programming formulations for the multi-group classification problem.     

Customized kernel execution on reconfigurable hardware for embedded applications

To conserve space and power as well as to harness high performance in embedded systems, high utilization of the hardware is required. This can be facilitated through dynamic adaptation of the silicon resources in reconfigurable systems in order to realize various customized kernels as execution proceeds. Fortunately, the encountered reconfiguration overheads can be estimated. Therefore, if the scheduling of time-consuming kernels considers also the reconfiguration overheads, an overall performance gain can be obtained. We present our policy, experiments, and performance results of customizing and reconfiguring Field-Programmable Gate Arrays (FPGAs) for embedded kernels. Experiments involving EEMBC (EDN Embedded Microprocessor Benchmarking Consortium) and MiBench embedded benchmark kernels show high performance using our main policy, when considering reconfiguration overheads. Our policy reduces the required reconfigurations by more than 50% as compared to brute-force solutions, and performs within 25% of the ideal execution time while conserving 60% of the FPGA resources. Alternative strategies to reduce the reconfiguration overhead are also presented and evaluated.     

Decentralized fault tolerant control of a class of nonlinear interconnected systems

In this paper, a novel decentralized fault tolerant controller (DFTC) is proposed for interconnected nonlinear continuous-time systems by using local subsystem state vector alone in contrast with traditional distributed fault tolerant controllers or fault accommodation schemes where the measured or the estimated state vector of the overall system is needed. The proposed decentralized controller uses local state and input vectors and minimizes the fault effects on all the subsystems. The DFTC in each subsystem includes a traditional controller term and a neural network based online approximator term which is used to deal with the unknown parts of the system dynamics, such as fault and interconnection terms. The stability of the overall system with the proposed DFTC is investigated by using Lyapunov approach and the boundedness of all signals is guaranteed in the presence of a fault. Therefore, the proposed controller enables the system to continue its normal operation after the occurrence of a fault, as long as it does not cause failure or break down of a component. Although the decentralized fault tolerant controller is designed mainly for large-scale systems where continuous transmissions between subsystems is not possible, it can also be applied to small-scale systems where sensor measurements are available for use in all subsystems. Finally the proposed methods are verified and compared in simulation environment.     

SimClus: an effective algorithm for clustering with a lower bound on similarity

Clustering algorithms generally accept a parameter k from the user, which determines the number of clusters sought. However, in many application domains, like document categorization, social network clustering, and frequent pattern summarization, the proper value of k is difficult to guess. An alternative clustering formulation that does not require k is to impose a lower bound on the similarity between an object and its corresponding cluster representative. Such a formulation chooses exactly one representative for every cluster and minimizes the representative count. It has many additional benefits. For instance, it supports overlapping clusters in a natural way. Moreover, for every cluster, it selects a representative object, which can be effectively used in summarization or semi-supervised classification task. In this work, we propose an algorithm, SimClus, for clustering with lower bound on similarity. It achieves a O(log n) approximation bound on the number of clusters, whereas for the best previous algorithm the bound can be as poor as O(n). Experiments on real and synthetic data sets show that our algorithm produces more than 40% fewer representative objects, yet offers the same or better clustering quality. We also propose a dynamic variant of the algorithm, which can be effectively used in an on-line setting.     

Using OLAP and multidimensional data for decision making

Managers see information as a critical resource and require systems that let them exploit it for competitive advantage. One way to better use organizational information is via online analytical processing and multidimensional databases (MDDBs). OLAP and MDDBs present summarized information from company databases. They use multidimensional structures that let managers slice and dice views of company performance data and drill down into trouble spots. For over a decade, proponents have touted these tools as the ultimate executive information system, but most of the hype comes from product vendors themselves. Based on our experience with several OLAP tools, we have developed a more pragmatic approach to the design of multidimensional information systems that lets managers make the most of their companies' information assets     

Computer program for automated sleep depth estimation

In this article, we present a new implementation of an amplitude-independent method for continuous-scale sleep depth estimation. Having been implemented as an add-on analysis module under commercially available biosignal recording and analysis software, it can be easily applied in clinical routine. The software gives the user full freedom to change all the analysis parameters inside theoretical limits. Computational sleep depth profiles produced by the presented software compare favourably with visual classifications. Future work will concentrate on systematic optimization of analysis parameters, further evaluation of the method with disturbed sleep and application of the method for automated adaptive sleep analysis.