Interference aware cooperative routing for wireless ad hoc networks

In this paper, we propose a cooperative approach for routing in wireless ad hoc networks. Our solution improves the interference distribution in the network, with an immediate positive impact on the throughput performance and energy efficiency. In determining new routes, we consider not only the cost associated with the current route, but also the potential interference impact of the route on the neighboring nodes.We use this cooperative approach to determine routes for CDMA ad hoc networks, which are known to be severely limited in performance by the near–far effect. Our simulation results using cooperative routing show an improvement in throughput of up to 60% compared to the classic minimum energy routing approach. This improvement is achieved at the expense of only a slight increase in the average energy per bit transmission for an end-to-end path.     

Regulatory sequences required for hst-1 expression in embryonal carcinoma cells

OBJECTIVE: To examine the relationship of subfertility with miscarriage, low birth weight, and preterm delivery. DESIGN: Comparison of time to pregnancy distributions between pregnancies that had different outcomes. Three comparisons were made: (a) miscarriages with live births; within live births, (b) low birth weight infant (up to 2,500 grams) or not low birth weight; (c) preterm birth (37 weeks or less) or not preterm. Cox regression was used to adjust for covariates. POPULATION: All first pregnancies were analyzed from the National Child Development Study, a large survey of young adults aged 33 years, which is nationally representative of the British-born population. MAIN OUTCOME MEASURES: The distribution of the time taken to conceive (time to pregnancy), miscarriage, birth weight, and preterm delivery. RESULTS: Pregnancies that ended in miscarriage tended to take 23% longer to conceive, after adjustment for the other variables. Pregnancies that resulted in preterm delivery tended to take 15% longer to conceive. There was no statistically significant association with low birth weight. CONCLUSIONS: Delay in time to conception is a risk factor for poor obstetric outcome, irrespective of medical intervention.     

A fast partitioning method for PLA-based FPGAs

A method for automatic multipartitioning of a multiple-output logic function into the smallest number of subfunctions for mapping to fixed-size PLAs of a field-programmable gate array (FPGA) chip is described. A detailed example to demonstrate the procedure is presented. It is shown that, for this example, the method produced almost optimum partitions in a fast and efficient manner     

In vitro and in vivo evaluation of sustained-release and enteric-coated microcapsules of diclofenac sodium

This work examines the release of diclofenac sodium from ethylcellulose (EC) microcapsules made up of different drug to polymer ratios. The release process was found to follow the Higuchi square root equation and not the zero-order or first order equations. However, for drug to polymer ratio of 1:1, a critical time (θ) was reached beyond which the release rate was lower than that predicted on the basis of the Higuchi square root equation. Dissolution experiments in 0.1N HCL revealed that less than 1.5% of the encapsulated drug was released in 6 h. This finding indicates the suitability of the EC microcapsules for enteric-coated preparations. The in vitro release of diclofenac sodium from microcapsules of different drug to polymer ratios was compared with that from a commercial sustained-release product. A distinct similarity between the release profile of the commercial product with that obtained for the 1:2 drug to polymer microcapsules was noted. The in vivo work included determination of the serum drug profile following oral administration of the microcapsules and the commercial product to rabbits. The obtained serum concentration time profile of the EC microcapsules exhibited a sustained-release pattern similar to the commercial product and consistent with the in vitro results.     

Surface and pore structure modification of cellulose fibers through cellulase treatment

The surface and pore structure of cellulose fibers have a significant impact on the properties and performance in applications. Cellulase enzymatic hydrolysis of cellulose fibers can result in changes to the surface and pore structure, thus providing a useful tool for fiber modification. This research characterizes these changes using various test methods such as fiber dimension, water retention value (WRV), hard‐to‐remove (HR) water content, freezing and nonfreezing bound water content, polymer adsorption, and crystallinity index. For a high‐dosage cellulase treatment (600 U/g dry solid), the fiber length was significantly decreased and the fibers were “cut” in the cross direction, not in the axial direction. The swelling capacities as measured by the WRV and HR water content increased for the high‐dosage treatment. Three independent measurements (nonfreezing bound water, polymer adsorption, and crystallinity index) are in good agreement with the statement that the amorphous regions of cellulose fibers are a more readily available substrate relative to crystalline regions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3833–3839, 2007     

Coupled turbulent flow,heat, and solute transport in continuous casting processes

A fully coupled fluid flow, heat, and solute transport model was developed to analyze turbulent flow, solidification, and evolution of macrosegregation in a continuous billet caster. Transport equations of total mass, momentum, energy, and species for a binary iron-carbon alloy system were solved using a continuum model, wherein the equations are valid for the solid, liquid, and mushy zones in the casting. A modified version of the low-Reynolds numberk-ε model was adopted to incorporate turbulence effects on transport processes in the system. A control-volume-based finite-difference procedure was employed to solve the conservation equations associated with appropriate boundary conditions. Because of high nonlinearity in the system of equations, a number of techniques were used to accelerate the convergence process. The effects of the parameters such as casting speed, steel grade, nozzle configuration on flow pattern, solidification profile, and carbon segregation were investigated. From the computed flow pattern, the trajectory of inclusion particles, as well as the density distribution of the particles, was calculated. Some of the computed results were compared with available experimental measurements, and reasonable agreements were obtained.     

Limiter effect on cycle slip performance of synchronization loops

A formula suitable for numerical evaluation is derived for the mean cycle slip time of a first-order loop with state-dependent spectral density of the loop noise. The formula is applied to a synchronizer with sinusoidal type limiter phase detector. The accuracy of the asymptotic expression due to Moeneclaey (1985) is evaluated. Better cycle slip performance of the considered synchronizer compared to that with multiplier phase detector is reported at the loop signal-to-noise ratio (SNR) α>2     

On the phase error variance of a first-order phase-locked loop inthe presence of cochannel CW interference and additive noise

The qualitatively different behavior of the PLL phase error variance reported by Yoon and Lindsey (1982) and Sarkar (1990) under the same assumptions is examined. An error which appeared in Yoon and Lindsey is identified and corrected