ASPECTS OF JOINT DESIGN AND EVALUATION IN THICK-ADHEREND APPLICATIONS

Structural adhesives are gaining wide recognition by industry as they offer engineering designers greater flexibility to achieve economic and technical advantages. In the marine industry there are potential applications for adhesives in various types of construction, for example, thick steel and composite adherends, (typically 5-15 mm thick). The applications include panels and large pipes. This article is largely concerned with the use of two-part epoxy adhesives. The purpose of this article is to understand and evaluate the weaknesses of adhesives and adherends, in relation to specific applications and to use design and material selection to alleviate them. This understanding can be extended to other thick adherend applications. This article will also highlight the impact of structural epoxy adhesive technology on the design and fabrication of steel, composite, and hybrid constructions. The benefits and inherent limitations that can accrue are quantified through three case studies related to thick adherend connections.     

Effect of In Situ Polymerization of Styrene onto Natural Rubber on Adhesion Properties of Styrene-Natural Rubber (SNR) Adhesives

Styrene-based deproteinized natural rubber (SNR) latex was synthesized by in situ polymerization. Three pre-vulcanization systems [conventional-cured (CV), semi-efficient-cured (Semi-EV), and efficient-cured (EV)] were studied in terms of tensile and adhesion properties. Good tensile properties were observed for CV and EV SNR. The Semi-EV SNR showed the best adhesion properties based on the good anchorage performance in all substrate pairings (polystyrene–polystyrene, polystyrene–rubber, and rubber–rubber). The pH modification on SNR latex via KOH addition has beneficial effects of removing protein layers, resulting in more styrene grafting sites in the rubber molecules. Consequently, the tensile and adhesion properties of the SNR are improved as more styrene polymers are grafted onto the rubber matrix. Semi-EV SNR with pH 12 has superior adhesive performance; hence, it is suitable for use as a pressure-sensitive adhesive.     

Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance (R_gb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra.     

Application of supercritical fluid chromatography in the quantitative analysis of minor components (carotenes,vitamin E,sterols, and squalene) from palm oil

The application of supercritical fluid chromatography (SFC) coupled with a UV variable-wavelength detector to isolate the minor components (carotenes, vitamin E, sterols, and squalene) in crude palm oil (CPO) and the residual oil from palm-pressed fiber is reported. SFC is a good technique for the isolation and analysis of these compounds from the sources mentioned. The carotenes, vitamin E, sterols, and squalene were isolated in less than 20 min. The individual vitamin E isomers present in palm oil were also isolated into their respective components, α-tocopherol, α-tocotrienol, γ-tocopherol, γ-tocotrienol, and δ-tocotrienol. Calibration of all the minor components of palm as well as the individual components of palm vitamin E was carried out and was found to be comparable to those analyzed by other established analytical methods.     

Dynamics-based amplification of RNA function and its characterization by using NMR spectroscopy

The ever-increasing cellular roles ascribed to RNA raise fundamental questions regarding how a biopolymer composed of only four chemically similar building-block nucleotides achieves such functional diversity. Here, I discuss how RNA achieves added mechanistic and chemical complexity by undergoing highly controlled conformational changes in response to a variety of cellular signals. I examine pathways for achieving selectivity in these conformational changes that rely to different extents on the structure and dynamics of RNA. Finally, I review solution-state NMR techniques that can be used to characterize RNA structural dynamics and its relationship to function.     

Strength of resin-coated-adhesive-bonded double lap-shear pultrusion joints at ambient temperature

The inherited adhesion limitation of polyester and vinyl ester resin-based pultruded GFRP makes pultrusions difficult to bond, especially when a thixotropic adhesive is used. While such an adhesive is necessary for gap filling, it has a limited wettability. Therefore, coating the adherend with low-viscosity epoxy resin, prior to bonding, improves wetting and hence increases joint strength. The paper describes the experimental methodology to achieve this, using double lap-shear (DLS) joints with various materials combinations. A significant strength improvement was reached as a result of coating the inner adherend in conjunction with using a “high adhesion” outer adherend. To further understand the effect of coating, numerical stress analysis was undertaken, including preliminary micro-models representing the composite/adhesive interface as well as overall DLS models.     

Application of FTIR Spectroscopy for the Determination of Virgin Coconut Oil in Binary Mixtures with Olive Oil and Palm Oil

Rapid Fourier transform infrared (FTIR) spectroscopy combined with attenuated total reflectance (ATR) was applied for quantitative analysis of virgin coconut oil (VCO) in binary mixtures with olive oil (OO) and palm oil (PO). The spectral bands correlated with VCO, OO, PO; blends of VCO and OO; VCO and PO were scanned, interpreted, and identified. Two multivariate calibration methods, partial least square (PLS) and principal component regression (PCR), were used to construct the calibration models that correlate between actual and FTIR-predicted values of VCO contents in the mixtures at the FTIR spectral frequencies of 1,120–1,105 and 965–960 cm⁻¹. The calibration models obtained were cross validated using the “leave one out” method. PLS at these frequencies showed the best calibration model, in terms of the highest coefficient of determination (R ²) and the lowest of root mean standard error of calibration (RMSEC) with R ² = 0.9992 and RMSEC = 0.756, respectively, for VCO in mixture with OO. Meanwhile, the R ² and RMSEC values obtained for VCO in mixture with PO were 0.9996 and 0.494, respectively. In general, FTIR spectroscopy serves as a suitable technique for determination of VCO in mixture with the other oils.     

Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. I. Preparation and characterization of the graft copolymer

PFA-g-polystyrene graft copolymers were prepared by simultaneous radiation-induced graft copolymerization of styrene onto poly(tetrafluoroethylene-co-perfluorovinyl ether) (PFA) films. The effects of grafting conditions such as monomer concentration, dose, and dose rate were investigated. Three solvents, i.e., methanol, benzene, and dichloromethane, were used as diluents in this grafting system. Of the three solvents employed, dichloromethane was found to greatly enhance the grafting process, and the degree of grafting increased with the increase of monomer concentration until it reached its highest value at a styrene concentration of 60 (vol %). The dependence of the initial rate of grafting on the monomer concentration was found to be of the order of 1.2. The degree of grafting was found to increase with the increase in irradiation dose, while it considerably decreased with the increase in dose rate. The formation of graft copolymers was confirmed by FTIR analysis. The structural investigation by X-ray diffraction (XRD) shows that the degree of crystallinity content of such graft copolymers decreases with the increase in grafting, and consequently, the mechanical properties of the graft copolymers were influenced to some extent. Both tensile strength and elongation percent decreased with the increase in the degree of grafting. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2095–2102, 1999     

The composition of the extractives from unaffected and heartrot affected heartwood of Acacia mangium Willd

A. mangium has been studied by a successive extraction of the wood with a series of solvents with increasing polarity, followed by GC, GC/MS and DC studies of the fractions obtained. The study of the extractives of sound and affected wood with respect to yield and composition cannot explain the influence of the heartrot fungi on wood components in detail. Differences mainly have been found in the more polar fractions (acetone/water and ethanol/water, respectively). The content of lipophilic extractive constituents is with about 0.6–0.7% rather low and does not differ between sound and affected heartwood. The composition of the lipophilic extractives is not very different either.

---

A. mangium wurde untersucht, wobei sukzessiv mit einer Reihe von L?sungsmitteln ansteigender Polarit?t extrahiert und die einzelnen Fraktionen mit Hilfe von GC, GC/MS und DC untersucht wurden. Die Untersuchung der Extrakte aus gesundem und befallenem Holz zeigte, da? Extraktausbeuten und Zusammensetzung den Einflu? des Pilzbefalls auf die Holzkomponenten nicht detailliert beschreiben K?nnen. Unterschied in Ausbeute und Zusammensetzung der Extrakte wurden haupts?chlich in den polaren Extraktfraktionen (Aceton/Wasser- und Ethanol/Wasser-Extrakte) gefunden. Der Gehalt an lipophilen Extraktbestandteilen ist mit etwa 0.6–0.7% eher niedrig, gesundes und befallenes Holz unterscheiden sich praktisch nicht. Auch die Zusammensetzung der lipophilen Extrakte ist kaum verschieden zwischen gesundem und befallenem Holz.