An advanced laser application for controlling of electric resistivity of thick film resistors

When electric resistivity of Thick Film Resistor (TFR) is adjusted to the desired value, laser beam is irradiated onto the resistor material so that a part of the resistor material is instantaneously vaporized and cut away. This conventional laser trimming method to adjust the resistivity of TFRs is an indispensable technique for manufacturing elec-tronic devices such as hybrid ICs. A peculiar phenomena was revealed by us, that is, when specially selected pulse laser beams were irradiated to TFR, the TFR was surface modified without cutting grooves, and then resistivity of the TFR was decreased. We completed the advanced laser process to apply this peculiar phenomena. 8 By comparing with conventional trimming processes, we can show prominent features of the advanced process, for example, resistivity of fine size TFR (300 micrometers-width and under) can be easily controlled. The decrease in resistivity of the TFR is considered to result from the decrease in specific resistivity of glass in the TFR. Because it is considered that the glass in the TFR is heavily doped with ruthenium impurities during the surface modification due to results of morphology observations and x-ray diffraction analysis. We have applied this advanced laser process to fine size TFR (300 micrometers-width), and developed high density hybrid ICs.     

Lightning occurrence data observed with lightning location systems of electric power companies in Japan: 2009–2013

Nine electric power companies in Japan have been collecting lightning data with lightning location systems. Five years of the lightning data (2009–2013) are summarized and analyzed in this paper. The recent annual number of lightning flashes of which the current is more than 10 kA in Japan is around 1 million. The variations of lightning occurrence characteristics by areas, seasons, and so on, are clarified. Meteorological conditions that may affect lightning occurrence are also discussed. Furthermore, we show that there is a clear correlation between the number of lightning strikes and the outage rate of transmission lines. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Character motion synthesis by principal component analysis and motion control interface by hands

In this paper, we propose an interactive character motion control interface that uses hands. Using their hands and fingers, the user can control a large number of degrees of freedom at the same time. We applied principal component analysis to a set of sample poses and assigned the extracted principal components to each degree of freedom of the hands (such as the hand positions and finger bending/extending angles). The user can control the blending weights of the principal components and deform the character's pose by moving their hands and bending/extending their fingers. We introduced pose and action controls, so that we can alter the standing pose and perform various actions with deformations. So that various types of actions were possible, we constructed a number of action models in advance. We introduced action model selection and action execution mechanisms. We developed methods for computing the feature vector, for applying principal component analysis, and for pose and action synthesis. In addition, we introduced a pose transition method for performing a step motion when necessary to prevent foot sliding. We present our experimental results and demonstrate the effectiveness of our interface. Copyright © 2015 John Wiley & Sons, Ltd.     

Temperature-controlled triaxial compression/creep test device for thermodynamic properties of soft sedimentary rock and corresponding theoretical prediction

In deep geological disposal of high-level nuclear waste,one of the most important subjects is to estimate long-term stability and strength of host rock under high temperature conditions caused by radioactive decay of the waste.In this paper,some experimental researches on the thermo-mechanical characteristics of soft sedimentary rock have been presented.For this reason,a new temperature-controlled triaxial compression and creep test device,operated automatically by a computer-controlled system,whose control software has been developed by the authors,was developed to conduct the thermo-mechanical tests in different thermal loading paths,including an isothermal path.The new device is proved to be able to conduct typical thermo-mechanical element tests for soft rock.The test device and the related testing method were introduced in detail.Finally,some test results have been simulated with a thermo-elasto-viscoplastic model that was also developed by the authors.     

Effect of operating factors on liquid–liquid mass transfer and dispersion pattern of sedimentary liquid in a mechanically stirred vessel

Liquid–liquid dispersion and mass transfer were investigated in mechanically stirred vessels without baffles by changing operation factors such as an impeller rotation speed, off-bottom clearance, volumetric liquid ratio, etc. The dispersion regime was categorized into five groups: the sedimentary liquid was kept at the vessel bottom (I), partially elevated without any collision (II), partially dispersed by colliding with the impeller bottom (III), both liquids were partially dispersed by collisions with impeller blades (III’), and the sedimentary liquid was completely dispersed (IV). The dispersion switched to I → II → III → IV with the increasing rotation speed and decreasing off-bottom clearance. The liquid–liquid mass transfer rate was significantly enhanced with the collision of the sedimentary liquid with the impeller bottom, and subsequently increased with the increasing rotation speed, volumetric liquid ratio, and vessel diameter and with the decreasing off-bottom clearance. A multiple regression analysis method was applied to determine the mass transfer rates of III and III’.     

Cloning and some properties of Japanese pear (Pyrus pyrifolia) polyphenol oxidase,and changes in browning potential during fruit maturation

A PCR‐amplified genomic DNA fragment encoding Japanese pear (Pyrus pyrifolia) polyphenol oxidase (PPO) was cloned and sequenced. The DNA appears to encode a 66 kDa precursor protein consisting of a 56 kDa mature protein and a 9.5 kDa N‐terminal transit peptide. The amino acid sequence showed high homology with apple PPO. The PPO mainly existed as a soluble fraction in cells and was limitedly proteolysed, while the mature form (56 kDa) was detected in plastids. Immature fruits showing high browning potential had high PPO activity and a high level of phenolics, while mature fruits showing little browning had high PPO activity but a low level of phenolics. Copyright © 2003 Society of Chemical Industry     

Relationship among collagen amount, distribution and architecture in the M. longissimus thoracis and M. pectoralis profundus from pigs

The relative distribution of types I and III collagens and collagen fibre architecture in the perimysium and endomysium were compared to the longissimus thoracis (LT) and pectoralis profundus (PP) muscles in pigs. The LT muscle was composed of type I myofibres 16.8%, IIA 12.9% and IIB 70.2%, and the PP muscle was 25.4, 23.1 and 51.5%, respectively. The total collagen amount differed significantly between the LT (2.66 mg/g) and PP (4.13 mg/g) muscle (P<0.001). On image analysis of the immunohistochemical preparations for types I and III collagens, the percentage area of the perimysium to the total collagen area showed significant differences between the muscles, where perimysial type I collagen occupied 25.4% of the total area in the LT muscle and 45.7% in the PP and perimysial type III 37.6 and 54.5%, respectively (P<0.001). In scanning electron microscopic photographs of the macerated preparation, very thick collagen layers composed of several fibre bands were observed in the perimysia of the PP muscle and appeared differently from the thinner perimysia with a few bands in the LT. Similar architecture of endomysial collagen fibres were observed around every myofibre type in the PP muscle and also in the LT. The fine surface cover of reticular collagen fibres around an adipocyte was shown as a global cast. These results suggested that the total collagen amount of the PP muscle was related mainly to the well developed perimysia composed of several collagen bands, indicating tougher meat compared with the LT muscle.     

Role of Heavy Meromyosin in Heat‐Induced Gelation in Low Ionic Strength Solution Containing l‐Histidine

The gelation of myosin has a very important role in meat products. We have already shown that myosin in low ionic strength solution containing l ‐histidine forms a transparent gel after heating. To clarify the mechanism of this unique gelation, we investigated the changes in the nature of myosin subfragments during heating in solutions with low and high ionic strengths with and without l ‐histidine. The hydrophobicity of myosin and heavy meromyosin (HMM) in low ionic strength solution containing l ‐histidine was lower than in high ionic strength solution. The SH contents of myosin and HMM in low ionic strength solution containing l ‐histidine did not change during the heating process, whereas in high ionic strength solution they decreased slightly. The heat‐induced globular masses of HMM in low ionic strength solution containing l ‐histidine were smaller than those in high ionic strength solution. These findings suggested that the polymerization of HMM molecules by heating was suppressed in low ionic strength solution containing l ‐histidine, resulting in formation of the unique gel.     

Syntheses of alpha-arbutin-alpha-glycosides and their inhibitory effects on human tyrosinase

Alpha-arbutin is a tyrosinase inhibitor. We synthesized alpha-arbutin-alpha-glycosides by the transglycosylation reaction of cyclomaltodextrin glucanotransferase from Bacillus macerans using alpha-arbutin and starch as acceptor and donor molecules, respectively. We isolated and characterized two major products from the reaction mixture. The structural analyses using 13C- and 1H-NMR spectroscopy proved that they were 4-hydroxyphenyl alpha-maltoside (alpha-Ab-alpha-G1) and 4-hydroxyphenyl alpha-maltotrioside (alpha-Ab-alpha-G2). Both alpha-Ab-alpha-G1 and alpha-Ab-alpha-G2 exhibited competitive-type inhibition on human tyrosinase as alpha-arbutin does. Their K(i) values were calculated to be 0.6 mM and 2.8 mM, respectively, which is slightly and significantly higher than that of alpha-arbutin (0.2 mM).     

Field instrument for simultaneous large dynamic range measurement of atmospheric hydrogen sulfide, methanethiol, and sulfur dioxide

We describe a membrane-based collection/analysis system that differentially monitors H2S and CH3SH, and to which a conductometric SO2 analyzer using the same collector was coupled. A diffusion scrubber (DS) comprised of a Nafion tube collects H2S selectively while a porous polytetrafluoroethylene (pPTFE) DS collects both H2S and CH3SH. Both gases are measured via their ability to react with fluorescein mercuric acetate (FMA) which results in decreased fluorescence. The limited dynamic range of a negative signal procedure was overcome by using dual DS units comprised of short and long scrubbers, placed serially in the liquid flow line. Different DS designs and membrane materials were investigated. H2S, CH3SH, and SO2 from a biogenic point source were continuously measured, and the H2S/CH3SH data compared well with a standard procedure involving Tedlar bag collection, preconcentration and thermal desorption from a Tenax trap, and measurement by gas chromatography/flame photometric detection. Walkaround portability of the instrument and very large dynamic range measurement of H2S and SO2 were demonstrated around the Mt. Aso volcano.