SJ—YⅡ—5型高爆速高威力水胶炸药的研制

文章简要分析了我国目前在中硬岩石爆破中工业炸药的使用情况，介绍了山西兴安化学材料厂新研制的一种适用于硬岩爆破的高爆速、高威力水胶炸药新品种，对其性能、爆破效果、经济实用性和安全性等进行了阐述。     

利用信息融合方法的三维特征提取

本文提出了一种基于信息融合的物体三维特征的提取方法，该方法利用两幅互相配准的三维测距图像和灰度图像，来提取多面体的三维特征。首先，通过分析灰度图像中的灰度变化及测距图像中的测距值变化，分别求取各自图像中物体的特征点及特征边；然后，利用两配准图像之间的对应关系，求得所有特征点、面与多边形在三维测距图像中的三维表示；接着，通过分析三维测距图像中所测得的各候选平面上特定点与边处的曲率及法向，验证候选平面     

一种实现最佳用户检测的非线性优化神经网络

本文提出并讨论了实现码分多址（CDMA）系统上最佳多用户检测（MUD）的一种神经网络方法。该方法通过将最佳多用户检测视为非线性优化组合问题，利用神经网络能有效求解非线性优化问题的优势，导出了一种非线性优化神经网络来实现最佳多用户检测，理论分析和计算机模拟表明，所提出的神经网络具有可实时应用的动态性能和较传统方法优越得多的误码率性能和抗多址干扰的性能。     

双极关键工艺的在线统计分析

采用了双极晶体管作为双极工艺的测试结构,将在线工艺的统计分析理论应用于双极工艺,研制了双极工艺的统计分析软件。最后给出了双极工艺的某些分析结果。     

两种超声清洗槽的声场分布比较

本文作者设计了一种斜底式超声清洗槽，并通过实验研究了它的声场分布，与平底式超声清洗槽相比，这种新型清洗槽深度方向的声场均匀性得么了改善，但水平方向的声场均匀性变化不大。     

Position-sensitive superheated-liquid-droplet neutron dosimeter

The one-dimensional (1D) position-sensitive superheated-liquid-droplet dosimeter (SLDD) has been fabricated and tested in the laboratory. The 1D SLDD is fabricated from a 9.525-mm OD, 6.35-mm ID, 20-cm long, Plexiglas-walled tube filled with a mixture of superheated-liquid Freon droplets and host medium glycerol. Washer-shaped piezoelectric acoustic transducers are positioned at both ends of the tube; they determine the number and positions of the acoustic events when the superheated-liquid droplets evaporate upon neutron irradiation. The SLDD is irradiated with the ¹³⁷Cs and ⁶⁰Co γ-sources, as well as ²⁵²Cf neutron source to test for its radiation response and spatial resolution. The SLDD based on the Freon-134a superheated-liquid droplets operating at 20°C and 1 atm is found to be ideal for measuring absorbed neutron dose. This study also proves that the positions of the radiation-induced nucleation acoustic events can be linearly determined from the differences in the transmission times received by the acoustic transducers on the 1D SLDD. The spatial resolution of the neutron depth-dose is 1 mm due the finite response time (1 μs) of the piezoelectric acoustic transducers.     

Cd-ZSM-5沸石催化剂的制备、表征和芳构化催化性能

采用离子交换、浸渍和混合三种方法制备镉改性ZSM-5沸石催化剂,考察了改性方法和镉含量对催化剂的表面酸性和Cd状态以及芳构化性能的影响。结果表明,加入镉降低了B酸性,Cd~(2+)与沸石结合形成了L_(1612)酸中心,其生成量取决于改性方法和Cd含量,并与芳构化活性提高有直接关系。     

LDD方法在提高电路工作电压中的应用研究

研究了利用轻掺杂漏结构来制作高电源电压器件的工艺方法。分析了ＬＤＤ结构参数对器件击穿特性的影响，并结合实验结果对Ｎ＾－区的注入剂量，长度及引入的串联电阻进行了优化设计。     

NMOS器件两次沟道注入杂质分布和阈电压计算

分别考虑了深浅两次沟道区注入杂质在氧化扩散过程中对表面浓度的贡献。对两次注入杂质的扩散分别提取了扩散系数的氧化增强系数、氧化衰减系数和有效杂地系数，给出了表面浓度与工艺参数之间的模拟关系式，以峰值浓度为强反型条件计算了开启电压，文章还给出了开启电压、氧化条件、不同注入组合之间的关系式。     

In Situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems

Particulate TiB₂ reinforced aluminum-based metal matrix composites (MMCs) were successfully fabricated by means of the reaction processing method. TiB₂ particulates were formed in situ through the reaction of Ti and B in Ti-Al-B, TiO₂ and B in TiO₂-Al-B, and TiO₂ and B₂O₃ in TiO₂-Al-B₂O₃ systems. The results showed that in situ TiB₂ particulates formed in the Ti-Al-B system had a size of 5 μm and they exhibited block and rodlike structures. Moreover, coarse Al₃Ti blocks several tens of micrometers in size were also formed simultaneously. On the other hand, equiaxed Al₂O₃ and TiB₂ particulates with a size of less than 2 μm were formed in situ in the TiO₂-Al-B and TiO₂-Al-B₂O₃ systems. The Al₃Ti phase was completely eliminated in the TiO₂-Al-B system with increasing B content. Tensile tests revealed that the Al₂O₃ · TiB₂/Al composite fabricated from the TiO₂-Al-B system exhibits excellent mechanical properties. The yield strength of the Al₂O₃ · TiB₂/Al composite appeared to increase with increasing TiB₂ content. The yield strength of the Al₂O₃ · TiB₂/Al composite could be further increased by introducing CuO into the TiO₂-Al-B system. Such an increment in mechanical strength arose from the strengthening effect caused by the Al₂Cu precipitates. The incorporation of CuO had no effect on the in situ reaction process of the TiO₂-Al-B system. Finally, the effect of SiC addition on the microstructure and mechanical properties of the composites fabricated from the TiO₂-Al-B and TiO₂-Al-B-CuO systems was also investigated.