Preparation of BaMgAl10O17∶Eu2+ and Its Phase Behavior in Microemulsion System

BaMgAl10O17∶Eu2 (BAM) was prepared in the microemulsion system and its phase behavior was studied. There exists a small region in the reverse microemulsion system where the dispersed particles are of spherical form. In this way, BAM blue phosphor with good dispersion can be synthesized. The microemulsion phase diagrams of the pseudo-ternary system (Triton X-100/cosurfactant-oil-BAM brine) were first established intuitively by the dilution method. The microstructure of microemulsions was determined through eyeballing, conductance technique, and polar optical microscopy. Its phase behavior is affected by various factors, such as temperature (room temperature, 30, 40 ℃), oil, surfactants, and cosurfactants in microemulsions. According to the phase diagrams, the microemulsion system of Triton X-100/1-hexanol-hexane-BAM brine was chosen to prepare the precursor. The BAM phosphor can be obtained via sintering the precursor at a comparatively low temperature. The phosphors were characterized by XRD and vacuum ultraviolet (VUV) spectra.     

提高开卷线纵剪机精度的研究

通过对纵剪机右立柱轴承间隙测量方法和左立柱导向结构的改进，保证了加工精度，易于操作，提高了生产效率。     

大孔径石蜡加氢精制催化剂的制备

采用氨吸附-程序升温脱附(NH3-TPD)、低温N2吸附(BET)、压汞法以及加氢精制活性评价等技术,探索SiO2-Al2O3载体在制备过程中孔结构和表面性质的变化。实验结果表明,采用特殊扩孔剂制备载体,当焙烧温度为700℃时,平均孔径可达到17.3nm,其中孔径大于20nm的孔占总孔体积的13.2%;同时载体表面上的中、强酸中心也全部丧失,均为弱酸中心。采用该载体制备的MoNiP/SiO2-Al2O3石蜡加氢精制催化剂,在MoO3用量减少了约1/4的情况下,比目前工业上使用的催化剂具有更高的脱金属能力和加氢精制活性。     

如何控制液压系统的噪声

本文对液压系统噪声产生的原因进行了分析，并相应地介绍了控制液压系统噪声的几项具体措施，指出了在实施噪声控制过程中应注意的事项。     

水力压裂净压力拟合分析解释技术研究与应用

基于三维裂缝延伸模拟模型的水力压裂净压力拟合分析解释技术,提出了净压力拟合分析解释的一般步骤及理论方法,研究了现场监测净压力的计算方法,并介绍了其在现场施工中的应用情况。该技术可以帮助认识地层参数和压裂参数,提高压裂施工成功率和有效率。     

行波管放大器相位噪声的分析及其抑制

主要分析规则调相信号对行波管放大器频谱纯度的影响,并且根据行波管放大器相位噪声产生的过程和原因,提出两种抑制相位噪声的方法.     

硫酸钙氨法制取硫酸钾新工艺的实验研究

利用K2 +2 ,Ca2 +/ /SO2 -4 ,Cl2 -2 ,NH3—H2 O混合体系相图作为工艺指导 ,进行硫酸钙制取硫酸钾工艺的相图研究和分析 ,确定实验优选因素及水平并进行正交实验 ,根据实验结果进行极差分析 ,得出新的结论。合适的工艺条件为 :氨浓度为 40 % ,配料比n( 2KCl) :n(CaSO4 ·2H2 O)为 1:1,反应温度为 5℃ ,反应时间为 1h。     

Real-time measurement of pointing action by using DSP

This paper presents an approach of measuring in real-time the vector of finger that is pointing to an object. DSP is used in the operation processing unit in order to do the real-time processing. The steps include the extraction of flesh-colored regions from an image, the labeling of the flesh-colored regions, and the detection of two characteristic positions on the finger so that the direction that the finger is pointing at will be calculated. The entire process takes about 29 msec, which makes it possible to have the frame rate of 34 fps. With this frame rate, this measurement approach is considered real-time and promising to be merged into other application systems. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Employing optimized combinations of one-class classifiers for automated currency validation

Automated currency validation requires a decision to be made regarding the authenticity of a banknote presented to the validation system. This decision often has to be made with little or no information regarding the characteristics of possible counterfeits as is the case for issues of new currency. A method for automated currency validation is presented which segments the whole banknote into different regions, builds individual classifiers on each region and then combines a small subset of the region specific classifiers to provide an overall decision. The segmentation and combination of region specific classifiers to provide optimized false positive and false negative rates is achieved by employing a genetic algorithm. Experiments based on high value notes of Sterling currency were carried out to assess the effectiveness of the proposed solution.