A management architecture for client‐defined cloud storage services

Cloud service providers offer virtual resources to users, who then pay for as much as they use. High‐speed networks help to overcome the limitation of geographical distances between clients and cloud servers, which encourage users to adopt cloud storage services for data backup and sharing. However, users use only a few cloud storage services because of the complexity of managing multiple accounts and distributing data to store. In this paper, we propose the client‐defined management architecture (CLIMA) that redefines a storage service by coordinating multiple cloud storage services from clients. We address practical issues of coordinating multiple cloud service providers using a client‐based approach. We implement a prototype as a realization of CLIMA, which achieves both reliability and privacy protection using erasure code and higher performance by optimally scheduling data transmission. We use our prototype to evaluate the benefits of CLIMA on commercial cloud storage service providers. Finally, CLIMA empowers clients to increase the manageability and flexibility of cloud storage services. Copyright © 2015 John Wiley & Sons, Ltd.     

Discontinuous Coarsening of Tetragonal Precipitates in Partially Stabilized Zirconia Induced by Diffusional Coherency Strain under Applied Stress

When partially stabilized zirconia with 6 mol% MgO and 4 mol% CaO is aged at 1450°C, intragranular precipitation occurs and concurrently the boundaries between the grains migrate, forming a Ca-enriched precipitate-free cubic phase and large tetragonal precipitates behind them. At these compositions and temperature the boundary migration is rapid and shows the characteristics of a discontinuous coarsening. A uniaxial compressive stress applied to this specimen during the aging treatment increases or decreases the migration rate of the boundaries parallel or perpendicular to the stress axis, respectively, in agreement with the prediction that a compressive coherency strain due to the diffusion of Ca atoms is produced at the surface of the retreating grains and drives the migration. The diffusional coherency strain energy is thus expected to be the dominant driving force for the discontinuous coarsening in this solid.     

Toughening of a Particulate-Reinforced Ceramic-Matrix Composite by Thermal Residual Stress

The micromechanics involved in increased crack growth resistance, K _R, due to the addition of TiB₂ particulate in a SiC matrix was analyzed both experimentally and theoretically. The fractography evidence, in which, the advancing crack was attracted to adjacent particulates, was attributed to the tensile region surrounding a particulate. Countering this effect is the compressive thermal residual stress, which results in the toughening of the composite, in the matrix. This thermal residual stress field in a particulate-reinforced ceramic-matrix composite is induced by the mismatch in the coefficients of thermal expansion of the matrix and the particulate when the composite is cooled from the processing to room temperature. The increase in K _R of the composite over the monolithic matrix, which was measured by using a hybrid experimental-numerical analysis, was 77%, and compared well with the analytically predicted increase of 52%. The increase in K _R predicted by the crack deflection model was 14%. Dependence of K _R on the volume fraction of particulates, f _p, and of voids, f _v, is also discussed.     

Protection of Digital TV from Cognitive Radio Interference

Analytic modeling and computational simulation for the protection of DTV from cognitive radio interference are performed. Protection is achieved by using the protection ratio, which is derived through system modeling and its analysis. On the frequency coordination between digital TV and cognitive radio, an analysis in a co‐channel environment, in a rural area in Korea, is performed.     

Exhaustive Output Arbitration of Input Buffered Switch with Buffered Crossbar

We propose a new arbitration method for an input buffered switch with a buffered crossbar. In the proposed method, an exhaustive polling method is used to decrease the synchronization. Using an approximate analysis, we explain how the proposed method improves the switch performance. Also, using computer simulations, we show the proposed method outperforms the previous methods under burst traffic.     

Performance of Efficient Signal Detection for LED-ID Systems

In this paper, effects of reader-to-reader interference are investigated for LED identification (LED-ID) system in a multi-reader environment. The LED-ID readers typically use different channels to avoid collision between readers. However, in-channel collision usually happens in terms of interrogation range. A reader-to-reader interference scenario is proposed, and nominal interrogation range of a desired reader is derived from this model. In order to evaluate the LED-ID reader-to-reader interference quantitatively, an efficient detection scheme is proposed and simulated by employing spreading sequence. The spreading sequence is inserted between each user’s frame formats. In the receiver, the desired signal is detected by using correlation among inserted spreading sequences. From simulation results, it is confirmed that the proposed scheme is very effective to enhance reliability of LED-ID communication systems.     

Analysis of issues in gate recess etching in the InAlAs/InGaAs HEMT manufacturing process

We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13 μm–0.16 μm to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.     

Design and Fabrication of ZnO-Based FBAR Microwave Devices for Mobile WiMAX Applications

In this letter, we present the design and fabrication of a novel ZnO-based film bulk acoustic wave resonator (FBAR) microwave devices. The novel FBAR devices employ a new-type of Bragg reflector with very thin chromium (Cr) layer formed between SiO₂ and W films. The Cr layer seems to enhance the adhesion between SiO₂ and W layers. The novel FBAR devices show good return losses (S₁₁) and high Q-factors at the frequency range of 2.7-3.0 GHz. This approach will be very helpful for mobile worldwide interoperability for microwave access applications.     

Improvement of the cell performance in the ZnS/Cu(In,Ga)Se2 solar cells by the sputter deposition of a bilayer ZnO : Al film

ZnS is a candidate to replace CdS as the buffer layer in Cu(In,Ga)Se₂ (CIGS) solar cells for Cd‐free commercial product. However, the resistance of ZnS is too large, and the photoconductivity is too small. Therefore, the thickness of the ZnS should be as thin as possible. However, a CIGS solar cell with a very thin ZnS buffer layer is vulnerable to the sputtering power of the ZnO : Al window layer deposition because of plasma damage. To improve the efficiency of CIGS solar cells with a chemical‐bath‐deposited ZnS buffer layer, the effect of the plasma damage by the sputter deposition of the ZnO : Al window layer should be understood. We have found that the efficiency of a CIGS solar cell consistently decreases with an increase in the sputtering power for the ZnO : Al window layer deposition onto the ZnS buffer layer because of plasma damage. To protect the ZnS/CIGS interface, a bilayer ZnO : Al film was developed. It consists of a 50‐nm‐thick ZnO : Al plasma protection layer deposited at a sputtering power of 50 W and a 100‐nm‐thick ZnO : Al conducting layer deposited at a sputtering power of 200 W. The introduction of a 50‐nm‐thick ZnO : Al layer deposited at 50 W prevented plasma damage by sputtering, resulting in a high open‐circuit voltage, a large fill factor, and shunt resistance. The ZnS/CIGS solar cell with the bilayer ZnO : Al film yielded a cell efficiency of 14.68%. Therefore, the application of bilayer ZnO : Al film to the window layer is suitable for CIGS solar cells with a ZnS buffer layer. Copyright © 2012 John Wiley & Sons, Ltd.     

Studies on the performance characteristics and improvements of the piezoelectrically-driven micro gas compressors

This study presents the main characteristics of a micro gas compressor produced by microfabrication techniques on silicon wafers. The compressor consists of a compression chamber, check valves and a silicon membrane where the piezoelectric bimorph actuator is installed. Compressor performance was investigated under various working conditions of input voltage and frequency to the actuator at several downstream back pressures. Volume stroke ratio is a critical parameter for gas compressors. However, micro actuators do not generally produce large displacement, so the volume stroke ratio of the micro compressor is expected to be significantly less than that of conventional mechanical compressors. Therefore, the possibility of using dual compression was also investigated in order to improve micro compressor performance. The performance of the micro compressor is evaluated in this study through experiments and simulation.