T_C≥400°C高温PTC陶瓷的研制

利用国产原料，采用传统的陶瓷材料制备工艺，研制了居里温度ＴＣ≥４００°Ｃ的高温ＰＴＣ陶瓷，制成了居里温度ＴＣ＝４１２°Ｃ，电阻Ｒ≤１０３Ω，ｌｇ（Ｒｍａｘ／Ｒｍｉｎ）＝４的高性能ＰＴＣ热敏陶瓷材料     

用边界元法提取VLSI版图电阻

介绍了ＶＬＳＩ版图验证中电阻提取的基本原理和主要方法，给出了一种新颖的基于边界元法的电阻提取算法。该算法采用变节点单元，较好地解决了实际问题中经常出现的角点问题。通过应用该算法对几个实例进行提取，证明使用本文的算法不仅在精度上而且在占用ＣＰＵ时间上都取得了令人满意的效果     

油溶性减阻功能聚合物的研制

介绍了以混合α-烯烃为原料,制备了具有减阻功能的共聚物。讨论了催化剂浓度、聚合温度、预聚合时间、原料单体中杂质含量对共聚物特性粘度和转化率的影响。试验表明,在较低的催化剂浓度和预聚合温度下,能得到较高分子量的聚合物。气相色谱法和DSC法测定其组成和单体混合物的组成基本一致,表明共聚物是一种无规的梳状结构聚合物。该聚合物达到较高特性粘度时,能获得较好的减阻率。     

Urban radiowave propagation: a 3-D path-integral wave analysis

A discussion concerning the need for three-dimensional (3-D) urban radiowave propagation models is presented and followed by a review of previously published work on this topic using the asymptotic path-integral technique. The limitations and advantages of this technique are explained and it is applied to study diffraction by a small number of canonical geometries. The validity of this technique is verified by comparison with controlled laboratory measurements taken at millimetric wave frequencies. Finally, its ability to classify field components according to their distribution in space is employed in order to analyze the observed field strength distributions in the model environments     

The oxidative inducation test applied to medical PVC and other polymers

We have examined the applicability of this simple and effective test to polymer systems widely used in the medical industry. First, it was found that not every polymer examined exhibited a distinct onset of autocatalytic oxidation detectable by DSC. However, for cases where distinct onsets are found, powerful insights can be obtained. These included activation energy of the degradation, thermal oxidative shelf life prediction, and correlation, with product performances. Actual examples are presented to illustrate the utility of the test.     

砷化镓声电荷转移延迟线的设计与工艺研究

由于声电荷转移(ACT)这一新颖的高速缓冲抽样技术的发明,使得新一代高速高频信号处理器件的实现成为可能。本文研究了第二代平面结构的ACT器件转移沟道的电位分布特性,给出了平面结构ACT延迟线的设计,并研究了ACT器件的工艺实现。     

EFFECTS OF COLD EXPANSION OF A HOLE ON FATIGUE CRACK INITIATION LOCATION AND LIFE OF AN LY12CZ ALLOY

Abstract— In the present study the effects of cold expansion of a hole on the location of fatigue crack initiation and life of LY12CZ alloy sheets are experimentally investigated and a quantitative expression of fatigue crack initiation life presented. Test results and analysis show that there may exist an optimum amount of cold expansion, for which both the coefficient of the resistance to fatigue crack initiation and the threshold are increased, and that the direction of cold expansion has no appreciable effect on fatigue crack initiation life. Observations show that, after cold expansion the fatigue crack nearly always initiates on the final entry face from which the mandrel is introduced into the hole during the final cold expansion process. Therefore it may be thought that the entry face is less resistant to fatigue crack initiation. In addition, the assumption of equivalence of residual stresses and also the strain hardening conditions on both the entry and exit faces may be questionable.     

The experiment about a plane mirror cavity with dielectric tubes

This paper introduce the experiment about a new type of quasi-optic cavity Making a experimental model, measuring all parameters of the cavity, giving experiment results. It shows that theoritical research in reference[1] is correct Its results coincide with theory. At same time, it also indicates the cavity is hopeful device in MMW.     

单相电焊机计量异常分析

针对单相电焊机采用单相感应式电能表进行计量中出现的圆盘反转现象 ,从理论和试验 2个方面分析和验证了 :由于单相电焊机本身的特点 ,无论它在负载还是空载状态 ,总会有 1块电能表出现圆盘反转 ,这是正常的