Nonlinearity in the rotational dynamics of Haidinger's brushes

Haidinger's brushes are an entoptic effect of the human visual system that enables us to detect polarized light. However, individual perceptions of Haidinger's brushes can vary significantly. We find that the birefringence of the cornea influences the rotational motion and the contrast of Haidinger's brushes and may offer an explanation for individual differences. We have devised an experimental setup to simulate various phase shifts of the cornea and found a switching effect in the rotational dynamics of Haidinger's brushes. In addition, age related macular degeneration reduces the polarization effect of the macula and thus also leads to changes in the brush pattern.     

Toxicity of parked motor vehicle indoor air

The interior of motor vehicles is made of a wide variety of synthetic materials, which emit volatile organic compounds (VOC). We tested the health effects of emissions from vehicles exposed to "parked in sunshine" conditions. A new and a 3 year old vehicle with identical interior were exposed to 14 000 W of light. Indoor air was analyzed by GC-MS. Toxicity of extracts of indoor air was assayed in human primary keratinocytes, human lung epithelial A549 cell line, and Chinese hamster V79 lung fibroblasts. In addition, toxicity after metabolic activation by CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, and CYP2E1 was assayed. The effect on type I allergic reaction (IgE-mediated immune response), type IV allergic reaction (T-cell mediated immune response), and irritative potential was evaluated also. A total of 10.9 and 1.2 mg/m(3) VOC were found in new and used motor vehicle indoor air, respectively. The major compounds in the new vehicle were o,m,p-xylenes, C3 and C4-alkylbenzenes, dodecane, tridecane, and methylpyrrolidinone. In the used vehicle they were acetone, methylpyrrolidinone, methylcyclohexane, acetaldehyde, o,m,p-xylenes, ethylhexanol, and toluene. No toxicity was observed in any cell line with or without metabolic activation. Neither did we find an effect on type IV sensitization or an irritative potential. A slight but statistically significant aggravating effect on IgE-mediated immune response of only the new vehicle indoor air was determined (p < 0.05). The IgE-response modulating effect of indoor air might be relevant for atopic individuals. Else no direct toxicity, no toxicity after metabolic activation by cytochrome P450, and no irritative or type IV sensitizing potential of motor vehicle indoor air were found, neither from the new nor used vehicle. Our investigations indicated no apparent health hazard of parked motor vehicle indoor air.     

Effect of Tensile Loading and Temperature on the Hydrogen Solubility of Steels at High Gas Pressure

The hydrogen solubility in ferritic and martensitic steels is affected by hydrostatic stress, pressure, and temperature. In general, compressive stresses decrease but tensile stresses increase the hydrogen solubility. This important aspect must be considered when qualifying materials for high-pressure hydrogen applications (e.g., for pipelines or tanks) by using autoclave systems. In this work, a pressure equivalent for compensating the effect of compressive stresses on the hydrogen solubility inside of closed autoclaves is proposed to achieve solubilities that are equivalent to those in pipelines and tanks subjected to tensile stresses. Moreover, it is shown that the temperature effect becomes critical at low temperatures (e.g., under cryogenic conditions for storing liquid hydrogen). Trapping of hydrogen in the microstructure can increase the hydrogen solubility with decreasing temperature, having a solubility minimum at about room temperature. To demonstrate this effect, the generalized law of the hydrogen solubility is parameterized for different steels using measured contents of gaseous hydrogen. The constant parameter sets are verified and critically discussed with respect to the high-pressure hydrogen experiments.     

Sugar-based surfactants for consumer products and technical applications

Sugar-based surfactants, such as sorbitan esters, sucrose esters, alkyl polyglycosides, and fatty acid glucamides gain increasing attention due to advantages with regard to performance, health of consumers, and environmental compatibility compared to some standard products. Sorbitan esters are well established products, which are mainly used as leather and textile auxiliaries or as emulsifiers for food at a volume of approx. 20,000 t/a. Sucrose esters are relatively hydrophobic products. The actual market size is estimated to be < 4,000 t/a – the main application being emulsifiers for food and cosmetics. Their use is still limited. Alkyl polyglycosides and fatty acid glucamides represent a perfect amphiphilic structure with excellent surface activity as well as solubility due to highly selective syntheses. For alkyl polyglycosides industrial processes have been developed in the past couple of years and a total capacity of ca. 80,000 t/a has been established. They are mainly used for cosmetic, manual dishwashing, and detergent applications. Fatty acid glucamides to date are exclusively used by one company in liquid and powdered detergents. The estimated production capacity is approx. 40,000 t/a. Comparable in their performance profile as co-surfactants, both products differ in their raw material base: whereas in the case of the fatty acid glucamides methylamine is incorporated in the product, alkyl polyglycosides are completely based on renewable resources. This, combined with very good performance and mildness, could be one reason why alkyl polyglycosides are the most successful sugar-based surfactants nowadays. Research to develop derivatives on this basis is still ongoing.     

Clinical evaluation of respiratory motion compensation for anatomical roadmap guided cardiac electrophysiology procedures

X-ray fluoroscopically guided cardiac electrophysiological procedures are routinely carried out for diagnosis and treatment of cardiac arrhythmias. X-ray images have poor soft tissue contrast and, for this reason, overlay of static 3-D roadmaps derived from preprocedural volumetric data can be used to add anatomical information. However, the registration between the 3-D roadmap and the 2-D X-ray image can be compromised by patient respiratory motion. Three methods were designed and evaluated to correct for respiratory motion using features in the 2-D X-ray images. The first method is based on tracking either the diaphragm or the heart border using the image intensity in a region of interest. The second method detects the tracheal bifurcation using the generalized Hough transform and a 3-D model derived from 3-D preoperative volumetric data. The third method is based on tracking the coronary sinus (CS) catheter. This method uses blob detection to find all possible catheter electrodes in the X-ray image. A cost function is applied to select one CS catheter from all catheter-like objects. All three methods were applied to X-ray images from 18 patients undergoing radiofrequency ablation for the treatment of atrial fibrillation. The 2-D target registration errors (TRE) at the pulmonary veins were calculated to validate the methods. A TRE of 1.6 mm ± 0.8 mm was achieved for the diaphragm tracking; 1.7 mm ± 0.9 mm for heart border tracking, 1.9 mm ± 1.0 mm for trachea tracking, and 1.8 mm ± 0.9 mm for CS catheter tracking. We present a comprehensive comparison between the techniques in terms of robustness, as computed by tracking errors, and accuracy, as computed by TRE using two independent approaches.     

Influence of Human Jaw Periosteal Cells Seeded β-Tricalcium Phosphate Scaffolds on Blood Coagulation

Tissue engineering offers auspicious opportunities in oral and maxillofacial surgery to heal bone defects. For this purpose, the combination of cells with stability-providing scaffolds is required. Jaw periosteal cells (JPCs) are well suited for regenerative therapies, as they are easily accessible and show strong osteogenic potential. In this study, we analyzed the influence of uncoated and polylactic-co-glycolic acid (PLGA)-coated β-tricalcium phosphate (β-TCP) scaffolds on JPC colonization and subsequent osteogenic differentiation. Furthermore, interaction with the human blood was investigated. This study demonstrated that PLGA-coated and uncoated β-TCP scaffolds can be colonized with JPCs and further differentiated into osteogenic cells. On day 15, after cell seeding, JPCs with and without osteogenic differentiation were incubated with fresh human whole blood under dynamic conditions. The activation of coagulation, complement system, inflammation, and blood cells were analyzed using ELISA and scanning electron microscopy (SEM). JPC-seeded scaffolds showed a dense cell layer and osteogenic differentiation capacity on both PLGA-coated and uncoated β-TCP scaffolds. SEM analyses showed no relevant blood cell attachment and ELISA results revealed no significant increase in most of the analyzed cell activation markers (β-thromboglobulin, Sc5B-9, polymorphonuclear (PMN)-elastase). However, a notable increase in thrombin-antithrombin III (TAT) complex levels, as well as fibrin fiber accumulation on JPC-seeded β-TCP scaffolds, was detected compared to the scaffolds without JPCs. Thus, this study demonstrated that besides the scaffold material the cells colonizing the scaffolds can also influence hemostasis, which can influence the regeneration of bone tissue.