Isolation and purification of egg yolk phospholipids using liquid extraction and pilot-scale supercritical fluid techniques

Egg yolk is an excellent source of phospholipids. Egg yolk powder (EYP) contains about 60% lipids, which consist of, on average, neutral lipids (65%), phospholipids (31%) and cholesterol (4%). The utilization of supercritical fluid techniques is a new way to selectively extract and fractionate non-polar and slightly polar components from foods and food products. In this study, we developed pilot-scale production methods for the isolation of high-purity egg yolk phospholipids. The method involves either liquid ethanol or supercritical fluid extraction (SFE) as isolation method and supercritical antisolvent process as precipitation method. EYP was fractionated to lipid- and protein-rich fractions using liquid ethanol or supercritical fluid as an extraction medium. In both cases, the target fraction was phospholipids dissolved in ethanol. From this solution, phospholipids were precipitated using supercritical carbon dioxide as antisolvent. Depending on the process conditions, 72–99% of the precipitate consisted of phosphatidyl choline and phosphatidyl ethanolamine, which appeared in ratios 6:1–7:1. The highest purity of phospholipids was obtained via precipitation of the isolate obtained using two-step SFE.     

Determination of cleanability and wearing of plastic flooring surfaces in field and laboratory conditions

Plastic surfaces are used widely as flooring materials in public and residential buildings. When new floor coverings are developed, both field and laboratory tests are needed. In this study the tendency to soiling and wearing and the cleanability of six commercial plastic flooring surfaces were examined in both field and laboratory conditions. The plastic flooring surfaces were studied using colorimetry and scanning electron microscopy (SEM). In the field experiments, outdoor conditions greatly affected soiling of the floorings, whereas the number of persons walking over the flooring did not correlate with the soiling values in the two buildings examined. Laboratory tests provided results rapidly and the plastic materials were ranked in a similar order of superiority both in the field and laboratory experiments. Furthermore, there was a significant correlation between the cleanability of the surfaces in the field and laboratory experiments (r = 0.94). The laboratory methods can therefore be used for obtaining indicative information for selecting materials for practical use and for comparing the cleanability properties of the materials.     

Effect of nitrapyrin on nitrapyrin residues and nitrate content in red beet roots fertilised with urea

The effect of nitrapyrin [2-chloro-6-(trichloromethyl)pyridine] application on nitrapyrin residues and nitrate content in red beet (Beta vulgaris L. var. conditiva) roots and in soil fertilised with urea was studied during the 1977 growing season. The nitrapyrin residues in roots were on 15 August between 0.00–1.19 μg g^?1 and on 1 October between 0.00–0.45 μg g^?1 (dry weight basis) correlating significantly r = 0.99, P<0.01) to the rates of nitrapyrin applied on 8 June (0–34 kg ha^?1). The content of nitrapyrin in roots decreased in autumn having in August-September a ‘biological half-life’ of 3 weeks. In soil the same parameter was in July-September more than 4 months. The ratio of nitrapyrin to its main breakdown product varied in soil between 3.5–24.8 and in red beets between 0.6–1.4. Neither of these compounds were found in processed canned red beets. Nitrapyrin treatment decreased the nitrate content in both soil and beets. The inhibitor application of 18 kg ha^?1 caused the highest reduction of the NO₃-nitrogen content in beets, the average values on dry weight basis being 0.51–0.34 mg g^?1 for 0–18 kg ha^?1 nitrapyrin application, respectively. The reduction of NO₃-nitrogen in beets from its level of 15 August to its September level was 44%. After 5 September the reduction of the nitrate level in beets was not significant.     

Computational framework for simulating fluorescence microscope images with cell populations

Fluorescence microscopy combined with digital imaging constructs a basic platform for numerous biomedical studies in the field of cellular imaging. As the studies relying on analysis of digital images have become popular, the validation of image processing methods used in automated image cytometry has become an important topic. Especially, the need for efficient validation has arisen from emerging high-throughput microscopy systems where manual validation is impractical. We present a simulation platform for generating synthetic images of fluorescence-stained cell populations with realistic properties. Moreover, we show that the synthetic images enable the validation of analysis methods for automated image cytometry and comparison of their performance. Finally, we suggest additional usage scenarios for the simulator. The presented simulation framework, with several user-controllable parameters, forms a versatile tool for many kinds of validation tasks, and is freely available at http://www.cs.tut.fi/sgn/csb/simcep.     

ESTERASES OF BAKER'S YEAST. III. THE ESTER/ACID RATIO IN MODEL SOLUTIONS

Ester/acid equilibria were studied in reaction mixtures containing ethyl alcohol, ethyl caprylate or caprylic acid, and baker's yeast or an esterase purified from baker's yeast in buffer. The equilibrium concentration of ethyl caprylate after an incubation of yeast or a yeast esterase preparation with caprylic acid was the same as in the case where yeast or esterase preparation was incubated with the ethyl caprylate. The equilibrium attained depends not only on the concentration of the ester and the alcohol but also on the pH, the final ester concentration remaining higher at low pH. It could be shown that yeast esterase is responsible for the hydrolysis or synthesis of the ester. At equilibrium the molar ratio of ethyl caprylate/caprylic acid is about the same as that found in fermentation solutions under the same conditions.     

Complementing visual tracking of moving targets by fusion of tactile sensing

Robot control in uncertain and dynamic environments can be greatly improved using sensor-based control. Vision is a versatile low-cost sensory modality, but low sample rate, high sensor delay and uncertain measurements limit its usability, especially in strongly dynamic environments. Vision can be used to estimate a 6-DOF pose of an object by model-based pose-estimation methods, but the estimate is typically not accurate along all degrees of freedom. Force is a complementary sensory modality allowing accurate measurements of local object shape when a tooltip is in contact with the object. In multimodal sensor fusion, several sensors measuring different modalities are combined together to give a more accurate estimate of the environment. As force and vision are fundamentally different sensory modalities not sharing a common representation, combining the information from these sensors is not straightforward. We show that the fusion of tactile and visual measurements enables to estimate the pose of a moving target at high rate and accuracy. Making assumptions of the object shape and carefully modeling the uncertainties of the sensors, the measurements can be fused together in an extended Kalman filter. Experimental results show greatly improved pose estimates with the proposed sensor fusion.     

Fighter pilots’ heart rate,heart rate variation and performance during instrument approaches

Fighter pilots’ heart rate (HR), heart rate variation (HRV) and performance during instrument approaches were examined. The subjects were required to fly instrument approaches in a high-fidelity simulator under various levels of task demand. The task demand was manipulated by increasing the load on the subjects by reducing the range at which they commenced the approach. HR and the time domain components of HRV were used as measures of pilot mental workload (PMWL). The findings of this study indicate that HR and HRV are sensitive to varying task demands. HR and HRV were able to distinguish the level of PMWL after which the subjects were no longer able to cope with the increasing task demands and their instrument landing system performance fell to a sub-standard level. The major finding was the HR/HRV’s ability to differentiate the sub-standard performance approaches from the high-performance approaches.

Practitioner Summary:

This paper examined if HR and HRV were sensitive to varying task demands in a fighter aviation environment and if these measures were related to variations in pilot’s performance.     

Markov Chain Monte Carlo (MCMC) methods for parameter estimation of a novel hybrid redundant robot

This paper presents a statistical method for the calibration of a redundantly actuated hybrid serial-parallel robot IWR (Intersector Welding Robot). The robot under study will be used to carry out welding, machining, and remote handing for the assembly of vacuum vessel of International Thermonuclear Experimental Reactor (ITER). The robot has ten degrees of freedom (DOF), among which six DOF are contributed by the parallel mechanism and the rest are from the serial mechanism. In this paper, a kinematic error model which involves 54 unknown geometrical error parameters is developed for the proposed robot. Based on this error model, the mean values of the unknown parameters are statistically analyzed and estimated by means of Markov Chain Monte Carlo (MCMC) approach. The computer simulation is conducted by introducing random geometric errors and measurement poses which represent the corresponding real physical behaviors. The simulation results of the marginal posterior distributions of the estimated model parameters indicate that our method is reliable and robust.     

The association of noise sensitivity with coronary heart and cardiovascular mortality among Finnish adults

The association of coronary heart and cardiovascular mortality with noise sensitivity was studied. We also investigated how this association is affected by self-reported lifetime noise exposure. In 1988 a case-control study, based on the Finnish Twin Cohort, was carried out to investigate the relationship between noise and hypertension (n=1495). Potential confounders were obtained from questionnaire in 1981 for the same individuals. Data on deaths and causes of death were obtained from record linkage to the nationwide register of death certificates. All deaths that occurred among the study population during the 15 years of follow-up were classified as being due to all causes (n=382), to cardiovascular diseases (n=193), including the number of deaths due to coronary heart diseases (n=111) and to other causes than cardiovascular diseases (n=189). Cardiovascular mortality (Hazard ratio 1.80, 95% CI 1.07-3.04) was significantly increased among noise-sensitive women. Among men, there were no statistically significant effects. Noise sensitivity may be a risk factor for cardiovascular mortality in women.