Effect of surface coating on the screw loosening of dental abutment screws

Regardless of the type of performed restoration, in most cases, a screw connection is employed between the abutment and implant. For this reason, implant screw loosening has remained a problem in restorative practices. The purpose of this study was to compare the surface of coated/plated screws with titanium and gold alloy screws and to evaluate the physical properties of coated/plated material after scratch tests via FE-SEM (field emission scanning electron microscopy) investigation. GoldTite, titanium screws provided by 3i (Implant Innovation, USA) and TorqTite, titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, Korea) were selected for this study. The surface, crest, and root of the abutment screws were observed by FE-SEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, and a scratch on the surface of the head region was made at constant load and thereafter the fine trace was observed with FE-SEM. The surface of GoldTite was smoother than that of other screws and it also had abundant ductility and malleability compared with titanium and gold screws. The scratch tests also revealed that teflon particles were exfoliated easily in the screw coated with teflon. The titanium screw had rough surface and low ductility. The clinical use of gold-plated screws is recommended as a means of preventing screw loosening.     

A scanning tunneling microscopy tip with a stable atomic structure

A single stable adatom on a {110}-type plane of a tungsten tip is created via field-evaporation in a field-ion microscope (FIM) operating at room temperature. This single adatom has sufficient surface mobility at room temperature and migrates, in one-dimension, along a <111>-type direction toward an edge of a {110}-type plane, due to the existence of an electric field gradient. The plane edge has a higher local electric field than its center, since it has a higher local geometric curvature. This result implies that the stable position of a single adatom during a scan of a scanning tunneling microscope (STM) tip on a surface is at the edge and not at the center of a {110}-type plane at room temperature. Therefore, the electron wave function of a tip is not symmetric and this fact should be taken into account in a careful analysis of STM images. Also a tip with a dislocation emerging at a {110}-type plane is suggested as an improved STM tip configuration, as the step at the surface, created by the intersection of the dislocation with it, is a perpetual source of single adatoms.     

Reassessment of Ni-Al and Ni-Fe-Al solidus temperatures

Solidus temperatures of the B2 NiAl phase have been determined by high-temperature differential thermal analysis for binary melt compositions Ni_xAl_100−x (45<x<57) and for ternary alloys Fe_yNi_50−yAl₅₀ (0≤y≤50). It was shown that the melting temperature of the stoichiometric Ni₅₀Al₅₀ phase is 1681 °C, which is 43 K higher than some literature data. The solidus line at the Ni-rich side of the Ni-Al phase diagram exhibits a steeper slope than that reported previously. Substituting Fe for Ni, the decrease of solidus temperature along the isoplethal section with 50 at.% Al of the ternary Ni-Fe-Al phase diagram exhibits a steep initial slope of −13 K/at.% Fe for small Fe-fractions, which changes into a nearly linear decrease with an average slope of −8.5 K/at.% Fe.     

Poly(N-methylaniline) coatings on stainless steel by electropolymerization

Poly(N-methylaniline) (PNMA) coatings have been electropolymerized on 304 stainless steel alloy by potentiodynamic, galvanostatic and potentiostatic synthesis techniques from aqueous solutions of 0.1 M N-methylaniline (NMA) and 0.3 M oxalic acid. Characterization of PNMA coatings was carried out by cyclic voltammetry, UV-Vis and FTIR spectroscopy techniques. Corrosion behavior of PNMA coated stainless steel electrodes was investigated using linear anodic potentiodynamic polarization, Tafel test, chronoamperometry and electrochemical impedance spectroscopy (EIS) techniques in 0.5 M aqueous HCl solutions. Corrosion test results showed that PNMA coatings possessed protection to uncoated stainless steel against corrosion.     

Dynamic Young’s modulus and internal friction in polycrystalline copper

An attempt has been made to measure the temperature dependence of dynamic Young’s modulus together with the related variation of internal friction in polycrystalline copper. A mechanical spectroscopy study was employed using a standard servo hydraulic fatigue testing machine equipped with a scanning laser extensometer. Dynamic Young’s modulus and internal friction were measured over a temperature range of 298 to 873 K at very low frequencies of 0.1, 0.05, and 0.01 Hz. One internal friction peak was observed over the ranges 450 to 700 K, together with marked decreases in the dynamic Young’s modulus in the same temperature range. From a quantitative analysis of the experimental data with the relaxation strength, relaxation time, and activation energy, it is concluded that the peak phenomenon is due to grain-boundary sliding relaxation.     

Effect of bismuth on the growth kinetics of intermetallic compounds in Sn-3.5Ag solder joints: A growth kinetic model

The effect on the growth kinetics of the intermetallic compounds (IMCs) in solder/Cu joints, caused by adding Bi to eutectic Sn-3.5Ag solder alloy, was examined at the aging temperatures of 150°C and 180°C. The Cu₆Sn₅ layer growth was significantly enhanced, but the Cu₃Sn layer growth was slightly retarded by the addition of Bi, resulting in significant growth enhancement of the total (Cu₆Sn₅+Cu₃Sn) IMC layer with increasing Bi addition. The IMC layer growth in the Bi-containing solder joints was accompanied by the accumulation of Bi ahead of the Cu₆Sn₅ layer that resulted in the formation of a liquid layer at the Cu₆Sn₅/solder interface. A kinetic model was developed for the planar growth of the Cu₆Sn₅ and Cu₃Sn layers in the solder joints, accounting for the existence of interfacial reaction barriers. Predictions from the kinetic model showed that the experimental results could be well explained by the hypothesis that the formation of a Bi-rich liquid layer at the Cu₆Sn₅/solder interface reduces the interfacial reaction barrier at the interface.     

Characteristics of ZnO thin film deposited on various metal bottom electrodes

ZnO films for electronic applications were deposited by radio-frequency (rf) sputtering onto various metal bottom electrodes (Pt/Ti, W, Ni) to investigate such structural properties as crystallinity and surface morphology. The crystallinity, surface morphology and composition of the as-deposited films were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Rutherford back-scattering spectrometry (RBS), respectively. The preferred orientation and surface morphologies were strongly influenced by the type of bottom electrodes. The ZnO films with (200) texturing deposited on Pt/Ti/SiO₂/Si showed a smoother and smaller grain size than those deposited on W and Ni. The ZnO films on Pt and W electrodes exhibited compressive residual stress. This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials”, organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

Separation of oxide inclusions from liquid metal in an applied electrostatic field

It is known that oxide inclusions in liquid metal carry mostly positive charges on their surfaces. In an electrostatic field, therefore, such charged particles suspended in a liquid metal experience forces and accumulate in the region of the negatively charged surface, resulting in the separation of oxide inclusions from the liquid metal. In this study, this principle was experimentally demonstrated for the case of a capacitor cell by the imposition of a d.c. potential on electrodes. The capacitor cell consisted of a dielectric container of Pyrex tube, a high voltage d.c. source, and two electrodes, which were symmetrically attached onto the outer surface of the Pyrex. tube. Experiments were carried out for suspensions of liquid tin/metal oxides, such as SnO₂, WO₃, and PbO under an applied potential of up to 12 kV. All experimental results were in good agreement with the theoretical prediction and showed that the degree of separation was significantly increased with the applied potential.     

Hybrid Model of High Speed Machining Centre Headstock

A hybrid high-speed machining centre headstock model based on two computation methods: the finite element method and the finite difference method is presented. The model allows one to calculate precisely the headstock's indices on the basis of which its optimal operating characteristics can be determined. The presented modelling methods allow one to evaluate a design from thermal, stiffness and durability points of view. By way of illustration, the behaviour of three machining centre headstocks with: an electrospindle on rolling bearings, a conventional spindle and an electrospindle on aerostatic bearings are modelled using the hybrid model.     

Effect of silicon content and annealing temperature on formation of retained austenite and mechanical properties in multi-phase steels

Cold-rolled and annealed ultra-high strength sheet steels with good ductility accompanied by TRIP of retained austenite have received considerable attention in recent years. This paper discusses the effect of silicon content and annealing temperature on the formation of retained austenite and the mechanical properties in Fe-0.34%C-1.7% Mn steels whose structure consists of ferrite, bainite and retained austenite. Silicon inhibited the cementite formation in bainite during isothermal holding and partitioned carbon from bainite to austenite, resulting in an increase in retained austenite content. When the silicon content was increased to 1.0 wt.% or higher, the amount of retained austenite markedly increased leading to good mechanical properties. 0.34%C-1.03%Si-1.7%Mn steel showed a high tensile strength of 1,030 MPa and a total elongation of 34.5% when annealed at 780°C for 5 min followed by isothermal holding at 400°C for 5 min. In this case, the amount of retained austenite was about 25%. The variation in tensile strength-elongation combination had good correlation with that in the amount of retained austenite with both annealing temperature and silicon content. The most retained austenite was obtained in the steel annealed at just above A_C1 temperature. The annealing temperature which gives the most retained austenite was decreased with decreasing the silicon content.