Die Bedeutung der Geschichte der Lebensmittelchemie

Ohne Zusammenfassung     

Kleine Beitr?ge zur Untersuchung von Kakaobohnen und Kakaoerzeugnissen

Ohne ZusammenfassungMitteilungen aus dem Chemischen Laboratorium der Gebr. Stollwerck A.-G. in Köln.     

Topology control for fault-tolerant communication in wireless ad hoc networks

Fault-tolerant communication and energy efficiency are important requirements for future-generation wireless ad hoc networks, which are increasingly being considered also for critical application domains like embedded systems in automotive and aerospace. Topology control, which enables multi-hop communication between any two network nodes via a suitably constructed overlay network, is the primary target for increasing connectivity and saving energy here. In this paper, we present a fault-tolerant distributed topology control algorithm that constructs and continuously maintains a k-regular and k-node-connected overlay for energy-efficient multi-hop communication. As a by-product, it also builds a hierarchy of clusters that reflects the node density in the network, with guaranteed and localized fault-tolerant communication between any pair of cluster members. The construction algorithm automatically adapts to a dynamically changing environment, is guaranteed to converge, and exhibits good performance as well.     

Purification,surface modification of coal ash silica and its potential application in rubber composites

This article reports the purification and surface modification of coal ash silica and afterwards its utilization as reinforcing filler in solution‐styrene‐butadiene rubber/butadiene rubber (S‐SBR/BR). The coal ash silica free of unwanted metal ions/mineral oxides was obtained using phosphoric acid. The chemical composition of the purified coal ash silica in comparison to impure coal ash indicates the presence of characteristic hydroxyl functional group at 3440 cm^?1 and an increase in the oxygen content as determined with the help of Fourier Transform Infrared and x‐ray photoelectron spectroscopy, respectively. The contact angle analysis shows that after purification the polar part of the surface energy increased to 17.5 from 12 m Jm^?2. While the surface area increased to an order of magnitude, i.e., 11.6 to 110.5 m² g^?1. The modification of purified silica particles with bis(3‐triethoxysilylpropyl) tetrasulfane reveal the functionalization of hydroxyl to ‐Si‐O‐R groups as detected at 1560 cm^?1. As a consequence, the modified silica based S‐SBR/BR composite resulted in improved mechanical properties due to enhanced silica‐rubber interaction. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fluidized bed spray granulation: Analysis of the system behaviour by means of dynamic flowsheet simulation

Nowadays, software tools for the flowsheet simulation of industrial processes are commonly used for design, simulation, balancing, troubleshooting and optimization purposes. Most of the tools are applicable to fluid processes only and cannot be effectively used for processes which involve solids.In this contribution we want to present the conceptual design of a new system applicable for the dynamic flowsheet simulation of complex solids processes. This system is developed as an enhancement to the existing simulation program.The novel software is able to simulate the unsteady behaviour of complex circuits of granulation processes. The transient behaviour during the start-up and changing of the process or material parameters can also be examined.As flowsheet examples, a typical spray granulation process with different schemes consisting of fluidized bed granulators, screens, mill and splitters was used. The mathematical model of the fluidized bed granulator is described by a one-dimensional population balance equation and coupled with heat and mass transfer and simple fluid dynamics.Received simulation results have shown that the proposed concept of the dynamic flowsheet simulation of granulation processes can be used effectively and has the potential to be generalized for other types of solids processes.     

Process Optimization in Tableware Industries Using Taguchi's Design of Experiments

The essential influences of 15 parameters on defects (cracks and bubbles) during production of tableware have been studied with 16 experimental progressions using a L₁₆(2¹⁵) experimental design by G. Taguchi. Evaluation (analysis of means and analysis of variance) indicated that in this production liter weight, drying time, moisture before biscuit firing, and position in the biscuit-firing kiln have a significant influence on cracks. Concerning bubbles, parameters with an influence are liter weight, gate system, mold material, and moisture content before glost firing. Rejects of the article used in the experiments were reduced from 2.44% to 2.27% with respect to cracks and from 6.22% to 0% with respect to bubbles.     

Control of morphology and nanostructure of copper and cobalt oxalates: effect of complexing ions, polymeric additives and molecular weight

Precipitated oxalates are often nanostructured and can be used as precursors for nanostructured oxides for different applications. The modification of the particle shape and nanostructures of both copper and cobalt oxalates has been demonstrated using polymeric additives or complexing counter-ions. In the case of cobalt oxalate the characteristic elongated rod particle shape (axial ratio of 10) can be modified by using polymethymethacrylate (PMMA) to produce particles with lower axial ratios of 2, through cubes all the way to platelets (axial ratio 0.2). The PMMA inhibits the growth of the particles along the [101] direction more and more strongly as the concentration of the polymer increases. The crystallite size from XRD line broadening is not modified by the PMMA indicating that the PMMA does not influence the nucleation and growth but modifies the aggregation kinetics. Copper oxalates precipitated in the presence of different cellulose derived polymers with different molecular weights and functional groups (methyl and propyl) showed sensitivity to both molecular weight and functional group. Higher molecular weights did not influence the copper oxalate particle shape, whereas methyl cellulose gave elongated particles and propyl celluloses gave platelet like particles. Copper oxalate precipitated in the presence of acetate counter ions gave platelets with an axial ratio of 0.15 compared to the cushion-like morphology (axial ratio 0.5). The primary crystallites were more elongated along the [001] direction in the presence of acetate, modifying the proportion of the hydrophobic and hydrophilic surfaces and hence influencing the aggregation kinetics and particle shape. The copper and cobalt oxalate particle formation seems to be dominated by the primary particle aggregation with the different additives interacting specifically with different crystallographic faces of the primary particles. By tuning this interaction particles with different shapes and substructures can be formed.     

A predictive model for the home outdoor exposure to nitrogen dioxide

The aim of this study is to find and test a predictive model that could be suitable to estimate the outdoor NO(2) concentrations at individual level, by integrating ecological measurements recorded by local monitoring stations with individual information collected by a questionnaire. For this purpose, the data from the Italian centres of the European Community Respiratory Health Survey II (ECRHS II) has been used. Outdoor NO(2) concentrations were measured using NO(2) passive sampling tubes (PS-NO(2)), exposed outdoor for 14 days, between January 2001 and January 2003. Simultaneously, average NO(2) concentrations were collected from all the monitoring stations of the three centres (MS-NO(2)). Individual measurements carried out with passive samplers were compared with the corresponding NO(2) 2-week concentrations obtained as the average of all local (background and traffic) monitoring stations (MS-NO(2)). A multiple linear regression model was fitted to the data using the 2-week PS-NO(2) concentrations as the response variable and questionnaire information and MS-NO(2) concentrations as predictors. The model minimizing the root mean square error (RMSE), obtained from a ten-fold cross validation, was selected. The model with the best predictive ability included centre, season of the survey, MS-NO(2) concentrations, type and age of building, residential area and reported intensity of heavy-duty traffic and explained the 68.9% of the variance. The non-parametric correlation between PS-NO(2) and the concentrations estimated by the model is 0.81 (95% CI: 0.77-0.85). This study shows that over short periods (2 weeks) a good prediction of home outdoor exposure to NO(2) can be achieved by simply combining routinely collected ecological data with dwelling characteristics and self-reported intensity of heavy traffic. Further studies are needed to extend this prediction to long-term exposure.