Structure–Property Relationships in Aligned Electrospun Barium Titanate Nanofibers

Barium titanate nanofibers were uniaxially aligned by electrospinning onto a rotating copper wire drum and alignment was maintained during calcination of the fibers. Two methods for maintaining alignment during calcination were tested, by either using carbon tape or a peeling off method to remove the aligned fibers from the mandrel followed by calcination. The carbon tape removal method led to the formation of shorter aligned nanowires while the peeling off method resulted in longer nanofibers. Additionally, the effects of calcination temperature and time on crystal structure were also examined. The degree of tetragonality in the barium titanate nanofibers increased at higher calcination temperatures and times. Piezoelectricity was confirmed in the nanofibers calcined using piezoeresponse force microscopy, yielding a d₃₃ value of 15.5 pm/V. Using the methods presented here, large quantities of aligned piezoelectric barium titanate and other ceramic fibers or wires can be produced to fulfill their demand in novel microelectronics.     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Fire‐retardant hybrid thermosetting resins from unsaturated polyesters and polysilazanes

This introduces an organic–inorganic thermosetting hybrid resin system based on unsaturated polyester and polysilazanes. It shows the chemical modification of unsaturated polyester structures by end capping to enable the combination of both components. In general, halogen‐free unsaturated polyesters are not fire‐retardant and have to be equipped with additives. Fillers and intumescent additives are preponderantly used in today's fire‐retardant formulations. In contrast to these fire‐retardants, polysilazanes act as ceramizing agents. Polysilazanes are suitable fire‐retardants for resin transfer molding due to their low viscosity. Both burning behavior and glass transition temperature (T_g) are investigated as important application properties. In contrast to state‐of‐the‐art fire‐retardant formulations polysilazane‐based thermosetting hybrid resins burn with high intensity and fast extinction. Therefore, total heat and smoke emission is decreased. The formation of ceramic structures during burning results in high residual mechanical properties and a low mass loss. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40375.     

Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules

In this paper, we present the selective structuring of all three patterns (P1, P2 and P3) of a monolithic interconnection of CIS (Cu(In,Ga)(S,Se)₂) thin film solar cells by picosecond laser pulses at a wavelength of 1064 nm. We show results for single pulse ablation threshold values and line scribing of molybdenum films on glass (P1), CIS on molybdenum (P2) and zinc oxide on CIS (P3). The purposes of these processes are the p‐type isolation (P1), cell interconnect (P2) and n‐type isolation (P3), which are required for complete cell architecture. The half micron thick molybdenum back electrode can be structured with a process speed of more than 15 m/s at about 15 W average power without detectable residues and damage by direct induced laser ablation from the back side (P1). The CIS layer can be structured selectively down to the molybdenum at process speeds up to 1 m/s at about 15 W average power, due to the precision of direct laser ablation in the ultrashort pulse regime (P2). The ZnO front electrode layer is separated by clean trenches with straight side walls at process speeds of up to 15 m/s at about 10 W average power, as a result of indirect induced laser ablation (P3). A validation of functionality of all processes is demonstrated on CIS solar cell modules (30 × 30 cm²). By replacing one state‐of‐the‐art process by a picosecond laser process at a time, solar efficiencies could be increased for P1 and P2 and stayed on a similar level for P3. After an optimization of the patterning processes in the R&D pilot line of AVANCIS, we achieved a new record efficiency for an all‐laser‐patterned CIS solar module: 14.7% as best value for the aperture area efficiency of a 30 × 30 cm² sized CIS module was reached. Copyright © 2014 John Wiley & Sons, Ltd.     

Über die Reaktionen von Benzimidazol-2-carbonsäurehydrazid mit Elektrophilen

About the Reactions of Benzimidazole-2-carbohydrazide with Electrophilic Compounds Benzimidazole-2-carbohydrazide ( 1 ) reacts with aldehydes and ketones to form N-alkylidene-benzimidazole-2-carbohydrazides( 2a–j ). With carbon disulfide, diphenyl carbonate and cyanates, ring closure takes place to afford 1,2,4-triazines and 1,3,4-oxadiazoles. Attempts to synthezise 2-isocyanato-benzimidazole failed. ¹H-n.m.r. and ¹³C-n.m.r. spectroscopic data of the compounds are given.     

Acylierung von Heterocyclen mit Kohlensäurederivaten. I. Kinetik und Mechanismus der Reaktion von 2-Aminobenzimidazolen mit Arylcyanaten

Acylation of Heterocycles with Carbonic Acid Derivatives. I. Kinetics and Mechanism of the Reaction of 2-Aminobenzimidazoles with Aryl Cyanates The second order rate constants for the reaction of 2-amino-benzimidazoles (2-ABI) with aryl cyanates forming 2-amino-benzimidazole aryl ester imide 3 have been determined in dependence on substituent effects by u. v. measurements. The results are interpreted by a six-membered cyclic transition state in which the electrophilic attack of the cyanate on the endocyclic N atom is catalyzed by an H bridge interaction of the exocyclic amino group of 2-ABI with the OCN group.     

Direct quantification of topological protection in symmetry-protected photonic edge states at telecom wavelengths

Topological on-chip photonics based on tailored photonic crystals(PhCs)that emulate quantum valley-Hall effeas has recently gained widespread interest owing to its promise of robust unidirectional transport of classical and quantum information.We present a direct quantitative evaluation of topological photonic edge eigenstates and their transport properties in the telecom wavelength range using phase-resolved near-field optical microscopy.Experimentally visualizing the detailed sub-wavelength structure of these modes propagating along the interface between two topologically non-trivial mirror-symmetric lattices allows us to map their dispersion relation and differentiate between the contributions of several higher-order Bloch harmonics.Selective probing of forward-and backward-propagating modes as defined by their phase velocities enables direct quantification of topological robustness.Studying near-field propagation in controlled defects allows us to extract upper limits of topological protection in on-chip photonic systems in comparison with conventional PhC waveguides.We find that protected edge states are two orders of magnitude more robust than modes of conventional PhC waveguides.This direct experimental quantification of topological robustness comprises a crucial step toward the application of topologically protected guiding in integrated photonics,allowing for unprecedented error-free photonic quantum networks。     

Acylwanderungen am 3(5)-Amino-pyrazol

Acyl Migrations on 3(5)-Amino-pyrazole 3(5)-Amino-pyrazole 1 form 3 isomeric monoacylation products, 4 diacylation products and 3 triacylation products by reaction with electrophiles like cyanates, isocyanates or carboxylic and chlorides, respectively. Acyl migrations are observed depending on the reaction temperature and the structure of the acyl residue. The structures of the acyl derivatives of 3(5)-amino-pyrazole were characterized by nmr-spectroscopy.     

Synthesis and reactivity of 4-chloro-3,3,4-trifluoro-methoxycarbonyl cyclobutene (CTMC)

An improved synthesis of CTMC is described. This cyclobutene is thermally stable towards electrocyclic ring opening. Its reactivity is explored and a number of radical adducts are described. A more complicated picture is observed with various nucleophiles. The strong dienophilic character of CTMC is illustrated by numerous examples. CTMC reacts well as a dipolarophile with diphenylnitrone, diphenylnitrilimine and diazoalkanes. The high reactivity of this cyclobutene is due to its inherent polarity and strain.