Reasons for drop in shell-and-tube condenser performance when replacing R22 with zeotropic mixtures. Part 1. Analysis of experimental findings

An experimental and theoretical investigation was made to find out the reasons for the drop in shell-and-tube condenser performance when replacing R22 with a zeotropic mixture R407C. Measurements show that at lower condenser loads the reduction in performance can be as large as 70% compared to the full condenser load. Calculation results are compared with experimental results for two different condensers, one with micro-finned tubes and one with 3-D finned tubes. Calculations show that the degree of mixing of the newly formed condensate on a tube and the drained condensate is a factor influential enough to explain the performance drop. 3-D finned tubes seem to have better mixing in the condensate than integral finned tubes.     

Pleurotusostreatus and Agaricus subrufescens: investigation of chemical composition and antioxidant properties of these mushrooms cultivated with different handmade and commercial supplements

In this study, the chemical composition, total phenolic content and antioxidant activity (DPPH, ORAC and FRAP assays) of A. subrufescens and P. ostreatus, cultivated with handmade and commercials supplements, were compared. Additionally, the compounds ergosterol, saccharopine, and hexitol were identified in A. subrufescens by HPLC-MS/MS. The antioxidant compound p-coumaric acid and dihexoses was found in both mushroom species. A. subrufescens presented higher total phenolic content (73.8 ± 0.6 mg GAE 100 g⁻¹) and antioxidant activity than P. ostreatus (16.6 ± 0.5 mg GAE 100 g⁻¹). The handmade supplement based on the waste of noble grains presented statistically similar phenolic content to the mushrooms cultivated with commercial ones Spawn Mate II SE (86.1 ± 1.4 and 92.9 ± 0.3 mg GAE 100 g⁻¹, respectively). Therefore, the results support the use of handmade supplements based on agro-wastes as a viable alternative to the use of high-cost commercial ones.     

Discovery of an Allosteric Ligand Binding Site in SMYD3 Lysine Methyltransferase

SMYD3 is a multifunctional epigenetic enzyme with lysine methyltransferase activity and various interaction partners. It is implicated in the pathophysiology of cancers but with an unclear mechanism. To discover tool compounds for clarifying its biochemistry and potential as a therapeutic target, a set of drug-like compounds was screened in a biosensor-based competition assay. Diperodon was identified as an allosteric ligand; its R and S enantiomers were isolated, and their affinities to SMYD3 were determined (K_D=42 and 84 μM, respectively). Co-crystallization revealed that both enantiomers bind to a previously unidentified allosteric site in the C-terminal protein binding domain, consistent with its weak inhibitory effect. No competition between diperodon and HSP90 (a known SMYD3 interaction partner) was observed although SMYD3–HSP90 binding was confirmed (K_D=13 μM). Diperodon clearly represents a novel starting point for the design of tool compounds interacting with a druggable allosteric site, suitable for the exploration of noncatalytic SMYD3 functions and therapeutics with new mechanisms of action.     

Statistical modeling of dissimilarity increments for d-dimensional data: Application in partitional clustering

This paper addresses the use of high order dissimilarity models in data mining problems. We explore dissimilarities between triplets of nearest neighbors, called dissimilarity increments (DIs). We derive a statistical model of DIs for d-dimensional data (d-DID) assuming that the objects follow a multivariate Gaussian distribution. Empirical evidence shows that the d-DID is well approximated by the particular case d=2. We propose the application of this model in clustering, with a partitional algorithm that uses a merge strategy on Gaussian components. Experimental results, in synthetic and real datasets, show that clustering algorithms using DID usually outperform well known clustering algorithms.     

Extraction and characterization of highly purified collagen from bovine pericardium for potential bioengineering applications

Bovine pericardium is widely used as a raw material in bioengineering as a source of collagen, a fundamental structural molecule. The physical, chemical, and biocompatibility characteristics of these natural fibers enable their broad use in several areas of the health sciences. For these applications, it is important to obtain collagen of the highest possible purity. The lack of a method to produce these pure biocompatible materials using simple and economically feasible techniques presents a major challenge to their production on an industrial scale. This study aimed to extract, purify, and characterize the type I collagen protein originating from bovine pericardium, considered to be an abundant tissue resource. The pericardium tissue was collected from male animals at slaughter age. Pieces of bovine pericardium were enzymatically digested, followed by a novel protocol developed for protein purification using ion-exchange chromatography. The material was extensively characterized by electrophoresis, scanning electron microscopy, energy dispersive X-ray spectroscopy, and infrared spectroscopy. The results showed a purified material with morphological properties and chemical functionalities compatible with type I collagen and similar to a highly purified commercial collagen. Thus, an innovative and relatively simple processing method was developed to extract and purify type I collagen from bovine tissue with potential applications as a biomaterial for regenerative tissue engineering.     

RF integrated inductor modeling and its application to optimization-based design

In this paper an optimization-based approach for the design of RF integrated inductors is addressed. For the characterisation of the inductor behaviour the double ??-model is used. The use of this model is twofold. On one hand it enables the generation of the inductor characterisation in a few seconds. On the other hand its integration into the optimization procedure is straightforward. For the evaluation of the model element values analytical expressions based on technology parameters as well as on the device geometric characteristics are used. The use of a technology-based methodology for the evaluation of the model parameters grants the adaptability of the model to any technology. The inductor analytical characterization is integrated into an optimization-based tool for the automatic design of RF integrated inductors. This tool uses a modified genetic algorithm (MGA) optimization procedure, which has proved its validation in previous work. Due to the design parameter constraints nature as well as the topology constraints, discrete variables optimization techniques are used. The accuracy of the results is checked against a non-commercial software.     

Use of Ozonated Water for Disinfecting Gastrointestinal Endoscopes

The reprocessing of endoscopes is a complex procedure due to their structural design. In the constant search for new antimicrobial substances, recent studies with ozone have yielded great benefits. The present study evaluated the effects of ozonated water used to disinfect endoscopes comparing its efficacy with the conventional technique (2% glutaraldehyde). According to the results obtained, when ozonated water was used (330 mg.min.L^?1), induced a 2 log reduction of the viable microorganisms under the conditions tested. Ozonated water was a potent gastrointestinal endoscopic sanitizer, suggesting it is a feasible alternative for disinfection.     

On extremal dependence: some contributions

The usual coefficients of tail dependence are based on exceedances of high values. These extremal events are useful and widely used in literature but an adverse situation may also occur with the upcrossing of a high level. In this context we define upcrossings-tail dependence coefficients and analyze all types of dependence coming out. We will prove that these coefficients are related to multivariate tail dependence coefficients already known in literature. We shall see that the upcrossings-tail dependence coefficients have the interesting feature of congregating both ??temporal?? and ??spatial?? dependence. The coefficients of tail dependence can also be applied to stationary sequences and hence measure the tail dependence in time. Results concerning connections with the extremal index and the upcrossings index as well as with local dependence conditions will be stated. Several illustrative examples will be exploited and a small note on inference will be given by presenting estimators derived from the stated results and respective properties.     

Application of Coffee Silverskin in cosmetic formulations: physical/antioxidant stability studies and cytotoxicity effects

Context: Currently, there is an increasing interest of cosmetic industry on natural extracts. The inclusion of antioxidants in topical formulations can contribute to minimize oxidative stress in the skin, which has been associated with aging. Also, questions of sustainability are leading to the study of new cosmetic ingredients obtained from food by-products. Coffee Silverskin (CS) is a food by-product with established antioxidant activity that has not yet been incorporated into a topical formulation.

Objective: The aim of this study was to evaluate the physical and microbiological stabilities and antioxidant activity of a hand cream formulation containing 2.5% (w/w) of CS extract upon production and after 6 months of shelf-life and in vitro safety/cytotoxicity on skin cell lines after production.

Materials and methods: The in vitro cytotoxicity was evaluated with MTS and LDH assays, at different concentrations, in HaCaT and HFF-1 cells. Formulations were stored at 25?°C/65% RH and 40?°C/75% RH. Physical, microbiological, and antioxidant stabilities were evaluated by centrifugation, viscosity, total colony count, DPPH and total phenolic content (TPC).

Results: The hand cream containing 2.5% (w/w) of CS extract showed stable physical characteristics independently of the storage conditions. The DPPH activity and TPC of the CS formulation were significantly higher compared with those of the base formulation. However, during storage, the antioxidant activity decreases slightly. Microbiological quality was also confirmed. No cytotoxic effects were observed.

Conclusion: It is possible to suggest that this formulation is stable under extreme conditions and safe for topical use.