Unsaturated para-linked aromatic LC polyesters: Thermotropic and lyotropic systems

Liquid-crystalline thermosets (LCT) are a new class of materials which combine typical properties of LC polymers with those of conventional thermosets. This article reports on the development of a lyotropic LC thermoset (LLCT) in which the solvent is a vinyl monomer. Such an LLCT is expected to have several advantages compared to conventional unsaturated polyester resins. The synthesis and characterization of a variety of novel substituted para-linked aromatic polyesters and copolyesters containing unsaturated fumaroyl units is presented. The thermal and liquid crystal properties were investigated. It is demonstrated that it is possible to prepare a lyotropic LC solution in styrene. These lyotropic solutions are capable of thermal crosslinking by the addition of a free-radical initiator. © 1995 John Wiley & Sons, Inc.     

Infrared heated μ-blistering,a new fabrication technology for HARMST

Polymeric replication technologies such as injection moulding or hot-embossing have gained wide acceptance in the microtechnological community, microthermoforming of thin polymer foils, also called μ-blistering, still remains relatively unknown. Although the general potentials of the µ-blistering have already been pointed out, little work has been carried out addressing its capability for high aspect ratio microstructuring. In the scope of this work we therefore demonstrate the feasibility of μ-blistering to obtain aspect ratios for free standing structures of up to 7 within a process cycle time of <4 min. The presented processing technology uniquely combines manufacturing of macro-, micro- and even nanoscopic feature sizes in a single process.     

Dehydrogenation of Light Alkanes Over Rhenium Catalysts on Conventional and Mesoporous MFI Supports

Recently, Re/HZSM-5 (Si/Al = 15) was shown to be an efficient catalyst for ethane dehydrogenation and aromatization at 823 K and atmospheric pressure. In this reaction, the major initial products were benzene, toluene and xylene (BTX), but increasing amounts of ethene were produced with time on stream due to deactivation of the catalyst. We show that by use of rhenium impregnated MFI supports with very few or no acidic sites (Si/Al > 500), highly selective ethane dehydrogenation catalysts are obtained with ethene selectivities of 98%. By use of mesoporous MFI supports (Si/Al >500) the lifetime of the catalyst appears to be slightly improved compared to conventional MFI crystals. The beneficial effect of a mesoporous MFI support is convincingly demonstrated in propane dehydrogenation, where both conversion and selectivities on the mesoporous MFI (Si/Al > 500) impregnated with Re are significantly higher than on Re supported on a comparable conventional MFI support.     

Mandibular gland secretions of the male beewolvesPhilanthus crabroniformis,P. barbatus,andP. pulcher (Hymenoptera: Sphecidae)

The composition of the territorial marking pheromones from mandibular glands of males of the beewolvesPhilanthus crabroniformis, P. barbatus, andP. pulcher have been determined. The structures of the components were elucidated by gas chromatography-mass spectrometry and gas chromatography-Fourier transform infrared spectroscopy. The major compound ofP. crabroniformis is isopropyl tetradecanoate, with somewhat lesser amounts of 2-tridecanone, 3-methyl-3-butenyl tetradecanoate, and 928 (Z)(E)-11-eicosen-1-ol. The major compounds ofP. barbatus are ethyl tetradecanoate and hexadecanal, which are present in approximately a 6040 ratio. These two compounds comprise over 95% of the neutral lipids. Also present in lesser amounts are ethyl dodecanoate, tetradecanal, hexadecan-1-ol, a ^x -octadecen-1-ol, and octadecan-1-ol. The major compounds ofP. pulcher are ethyl (Z)-7-hexadecenoate and geranylgeraniol acetate, which comprise nearly 90% of the neutral lipid fraction, with smaller amounts of tetradecanal, pentadecanal, and ethyl hexadecanoate; trace amounts of ^x hexadecenal, hexadecanal, and octadecanal are also present.     

Heterogeneously assisted oxidation of adsorbates from carbonmonoxide, methanol and ethanol by hydrogen peroxide solutions on platinum electrodes in sulphuric acid

The influence of hydrogen peroxide on the adsorption and oxidation of carbon monoxide, methanol and ethanol adlayers on porous Pt electrodes were studied in 2 M sulphuric acid solution by means of cyclic voltammetry and differential electrochemical mass spectrometry (DEMS). The oxidation of adsorbed species is observed at electrode potentials far less negative than those required for electrochemical adsorbate oxidation. The oxidation by H₂O₂ is dependent on its concentration in solution, as well as on the adsorbates and their coverages. In all cases the isolated adlayers are oxidised by dissolved H₂O₂. However, the presence of H₂O₂ during adsorption partially inhibits adlayer formation from CH₃OH and C₂H₅OH, but avoids almost completely the adsorption of carbon monoxide. The removal of the residues from the surface by dissolved hydrogen peroxide probably occurs through O_ad species formed during the heterogeneous decomposition reaction of H₂O₂ on Pt.     

Solubility of Propane in Sulpholane at Elevated Pressures

The solubility of propane in sulpholane has been determined at temperatures in the range 298‐403 K at pressures up to 17.6 MPa. The experimental results were correlated by the Peng‐Robinson equation of state, and binary interaction parameters have been obtained for this system. The parameters in the Krichevsky‐Ilinskaya equation were calculated from these interaction parameters.     

Aboveground nitrogen in relation to estimated total plant uptake in maize and bean

The main objective of this field study was to estimate the total plant uptake of soil mineral N in maize (Zea mays L.) and common bean (Phaseolus vulgaris L.) grown in crop rotations under different N content in Nicaragua. Secondary objectives were to estimate the fraction of the measured soil mineral N content taken up in this way, and to determine how the measured N in plant aboveground parts was related to the total mineral N uptake. A large variation in N content was obtained by using data from fertilisation experiments. Plant total N uptake was estimated as the residual N in a mass balance calculation of soil mineral N. Mineral N content in the top 0–0.3 m soil layer in the field cultivations and in tubes isolated from root uptake, and N content in aboveground plant parts were measured every 30 days. Estimated plant total uptake of soil mineral N varied considerably (2.5–14 g N m⁻² 30 day⁻¹) over periods and N treatments. The range of variation was similar for maize and bean. The fraction of the soil mineral N that was taken up by the plant daily varied more in maize (about 0.03–0.12 day⁻¹) than in bean (about 0.05–0.08 day⁻¹). Our results suggest that monthly changes in N in aboveground plant parts were linearly related to plant total N uptake during the same period. Aboveground plant N constituted between about 55% and 80% of total uptake of soil mineral N in maize depending on period within season, whereas for bean it was more constant and smaller (about 40%).     

Compatibilization of polymer blends from poly(styrene‐co‐acrylonitrile) and polycarbonate by oxazoline modification of poly(styrene‐co‐acrylonitrile) in the melt

A good way of achieving compatibility in polymer blends of poly(styrene‐co‐acrylonitrile) (S/AN) and bisphenol A polycarbonate (PC) is the chemical modification of S/AN in the melt. A catalyzed reaction of the nitrile groups with a substituted 2‐amino alcohol or 2‐amino phenol resulted in a conversion of nitrile groups of 55–75% in 60 min. The introduced heterocyclic structures were ethyl hydroxymethyl oxazoline (EHMOXA) and benzoxazole (BenzOXA), respectively. The use of dibutyltin oxide as a catalyst led to the highest efficiency. The modified polymer was characterized by Fourier transform infrared and NMR spectroscopy, elemental analysis, and reactions with organic acids and anhydrides. The modified S/AN showed good technical compatibility (single glass‐transition temperature) with PC in blends made from solution and from the melt. All blends were characterized with oscillating rheometry and differential scanning calorimetry. Rheological measurements showed that EHMOXA–S/AN reacted with PC and had crosslinked structures, whereas BenzOXA–S/AN showed compatibilization without any (crosslinking) reaction. The melt blends of BenzOXA–S/AN and PC showed a downward shift in the complex viscosity due to the influence of the BenzOXA group. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2322–2332, 2003     

Phase stability and magnetic properties of SrFe18O27 W-type hexagonal ferrite

W-type ferrite is a member of the hexagonal ferrite family and a potential permanent magnet material. However, its synthesis conditions are not fully understood yet. Samples were sintered either at 1400°C in air and quenched, or at 1300°C at reduced oxygen partial pressure. The precise stability conditions of this W-type ferrite were investigated in the temperature range of 1200°C-1400°C using thermogravimetry, XRD, and electron microscopy. At 1300°C, the ferrite is stable at oxygen partial pressures of . At more oxidizing conditions, the ferrite decomposes into M-type ferrite and hematite, while at more reducing atmospheres Sr₄Fe₆O₁₃ and magnetite are formed. The nonstoichiometry δ of SrFe_18−δO₂₇ was derived from thermal analysis data at 1300°C as function of oxygen partial pressure and was found to be mainly due to cation vacancies. Magnetization measurements show that this W-type ferrite exhibits M_s = 103 emu/g at T = 4 K, which agrees well with a ferrimagnetic spin arrangement according to Gorter's model. As alternative, Zn-substituted W-ferrite was found to be stable in air at 1200°C with a large M_s = 123 emu/g at 4 K.