Evaluation of mass loss of weld-deposited hardfacing with cored wire Ti-FeCrC alloy

In this article, we have studied the mass loss of hardfacing applied by flux-cored arc welding. Heat input, shielding gas and number of layers of coating were changed to application of Fe–Cr–Ti–C self-shielded tubular wire. Overlapping beads were deposited on plates of carbon steel AISI 1020 to analyse the mass loss, hardness and microstructure. For the analysis of mass loss, beads were deposited forming overlapping layers of coatings. Hardness measurements were performed on the surface of the specimens of wear. A rubber wheel abrasion tester was used to access the mass loss of coatings. The coatings had retained austenite and martensite microstructure with carbides finely dispersed in the matrix. The main factors that contributed to the increase in mass loss were the cracks due to higher cooling rate of the samples deposited with low heat input, the dilution in the first layer of all samples also contributed to the increase in mass loss. The smallest mass losses were those deposited coatings with high heat input, the second and fourth layers, the samples AC2, AC4 and AS2. The volume fraction of titanium carbides contributed to the decrease in the mean free path between the particles of carbides and increased the wear resistance of the coatings.     

Removal of lindane using electrokinetic soil flushing coupled with air stripping

Journal of Applied Electrochemistry - This paper evaluates the remediation of soil spiked with lindane using a combined treatment consisting of electrokinetic soil flushing (EKSF) with air...     

Investigation of cure kinetics in epoxy/multiwalled carbon nanotube nanocomposites

With the increased interest in thermoset resin nanocomposites, it is important to understand the effects of the material on nanoscale characteristics. In this study, a curing reaction of an epoxy resin, which contained 0.25, 0.50, or 1.00 wt % of multiwalled carbon nanotubes (MWCNTs), at different heating rates was monitored by differential scanning calorimetry; cure kinetics were also evaluated to establish a relationship between crosslinking (network formation) and mechanical properties. MWCNT concentrations above 0.25 wt % favored crosslinking formation and decreased the activation energy (E_a) in the curing reaction. Examination of the kinetic mechanism suggests that the MWCNT locally restricted the spatial volume and favored the formation of nodular morphology in the resin, especially for high MWCNT concentrations. The MWCNT exhibited some entanglement in the matrix, which hindered a more pronounced effect on the mechanical properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39857.     

Treatment of Chronic Kidney Disease with Extracellular Vesicles from Mesenchymal Stem Cells and CD133+ Expanded Cells: A Comparative Preclinical Analysis

Chronic kidney disease (CKD) is characterized by structural abnormalities and the progressive loss of kidney function. Extracellular vesicles (EVs) from human umbilical cord tissue (hUCT)-derived mesenchymal stem cells (MSCs) and expanded human umbilical cord blood (hUCB)-derived CD133⁺ cells (eCD133⁺) maintain the characteristics of the parent cells, providing a new form of cell-free treatment. We evaluated the effects of EVs from hUCT-derived MSCs and hUCB-derived CD133⁺ cells on rats with CDK induced by an adenine-enriched diet. EVs were isolated by ultracentrifugation and characterized by nanoparticle tracking analysis (NTA) and electron microscopy. The animals were randomized and divided into the MSC-EV group, eEPC-EV group and control group. Infusions occurred on the seventh and 14th days after CKD induction. Evaluations of kidney function were carried out by biochemical and histological analyses. Intense labeling of the α-SMA protein was observed when comparing the control with MSC-EVs. In both groups treated with EVs, a significant increase in serum albumin was observed, and the increase in cystatin C was inhibited. The results indicated improvements in renal function in CKD, demonstrating the therapeutic potential of EVs derived from MSCs and eCD133⁺ cells and suggesting the possibility that in the future, more than one type of EV will be used concurrently.     

Multi-scale mechanistic modelling of the host defence in invasive aspergillosis reveals leucocyte activation and iron acquisition as drivers of infection outcome

Aspergillus species are ubiquitous environmental moulds, with spores inhaled daily by most humans. Immunocompromised hosts can develop an invasive infection resulting in high mortality. There is, therefore, a pressing need for host-centric therapeutics for this infection. To address it, we created a multi-scale computational model of the infection, focused on its interaction with the innate immune system and iron, a critical nutrient for the pathogen. The model, parameterized using published data, was found to recapitulate a wide range of biological features and was experimentally validated in vivo. Conidial swelling was identified as critical in fungal strains with high growth, whereas the siderophore secretion rate seems to be an essential prerequisite for the establishment of the infection in low-growth strains. In immunocompetent hosts, high growth, high swelling probability and impaired leucocyte activation lead to a high conidial germination rate. Similarly, in neutropenic hosts, high fungal growth was achieved through synergy between high growth rate, high swelling probability, slow leucocyte activation and high siderophore secretion. In summary, the model reveals a small set of parameters related to fungal growth, iron acquisition and leucocyte activation as critical determinants of the fate of the infection.     

Poly(ethylene glycol)-interpenetrated genipin-crosslinked chitosan hydrogels: Structure,pH responsiveness,gelation kinetics,and rheology

In the development of pH-responsive chitosan-based hydrogels, achieving reproducible porosity and swelling behavior is essential for the design of hydrogel networks. Herein, we enhance the level of control in hydrogel microarchitecture by incorporating poly(ethylene glycol) (PEG) into the chitosan–genipin matrix. Hydrogels, varied in composition, were synthesized under mild conditions (37°C, 1 atm, 24 hr), yielding microporous structures with a pore diameter ranging from 11 to 57 μm and an average cross-sectional porosity of approximately 40–64%. Compared to chitosan–genipin hydrogels without PEG, presence of PEG in concentrations up to 1.9 mM generated the same effect as would increase in genipin content, yielding structures with a smaller pore diameter, a lower swelling degree in pH 2 buffer and a higher elastic modulus. Considering cost effectiveness and scale-up, reducing genipin content by the addition of PEG is favorable. Importantly, hydrogel samples containing higher concentrations of PEG (2.9 mM and above) showed a sudden increase in the swelling degree accompanied with a decrease in the elastic modulus. Findings showcase the potential variation in the composition of these hydrogels has in yielding scaffolds with significantly different physico-chemical behaviors.     

Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers     

Metallization and Ar‐O plasma effects on dental enamel roughness evaluated with SEM and MeX™ for 3D reconstruction

The MeX? software is a useful tool for tridimensional data collection for surface evaluation and could be relevant to evaluate the same specimen in different phases of the study, assuming repeated measures of dental enamel roughness. The aim of this study was to evaluate the influence of sample metallization for dental enamel roughness analysis with 3D images reconstructed using MeX? software from Scanning Electron Microscopy (SEM) images. The influence of 74.98% (%mol/mol) argon?oxygen plasma for carbon layer removal on surface roughness of the metallized specimen was also evaluated. Dental enamel specimens were prepared for SEM analysis with and without carbon metallization using conventional or environmental modes. Argon?oxygen plasma for carbon layer removal was used and surface roughness was re‐evaluated. Roughness obtained by SEM and MeX? reconstructed images, with or without metallization, did not differ. No significant alteration on surface roughness after carbon layer removal using plasma was found. SEM baseline evaluation using conventional mode without sample preparation and in environmental mode were not comparable. Roughness of enamel 3D images reconstructed with MeX? software from SEM images, with or without metallization was similar. The 74.98% (%mol/mol) argon?oxygen plasma removed the carbon layer with no effect on enamel roughness.