The evaporation and carburization behavior of coated systems of niobium on molybdenum and niobium on titanium

The evaporation, carburization and diffusion behavior of Nb-coated Mo and of Nb-coated Ti were investigated in order to estimate the surface characteristics of the coated systems. Nb layers were formed on Mo by both chemical and physical vapor deposition and on Ti by just physical vapor deposition. From the diffusion behavior, interdiffusion coefficients were obtained at 1860°C, 1980°C and 2080°C for the chemically vapor-deposited Nb/Mo system. From evaporation experiments it was found that simultaneous evaporation of Nb and Mo occured at about 2300°C for thick films of Nb on Mo. For thin films of Nb on Mo, the evaporation of both Nb and Mo was confirmed at 1900°C by ion microprobe analysis of the condensate. For Nb/Ti, rapid diffusion of Nb into Ti and evaporation of Ti similar to the case of Nb-Ti alloys were observed. From the carburization study, it was found that an Nb coating appreciably retards the carburization of Ti and Mo.     

Rate of emulsion polymerization of styrene

In emulsion polymerization, the Smith and Ewart theory gives about two or three times the number of polymer particles obtained by experiment. In this paper, a reaction model is proposed which, from the standpoint of reactor design, can give an adequate explanation of the whole course of an emulsion polymerization of monomer highly insoluble in water. Among other things, the generating process of polymer particles is examined in detail. It is demonstrated experimentally that a new parameter proposed here, which represents the degree of difficulty of monomer initiation in micelles, is indispensable in explaining that process. Also confirmed is that monomer initiation takes place more easily in polymer particles than in micelles. According to the new model, the progress of polymerization, i.e., monomer conversion, the number of the polymer particles, and properties of polymer thus produced can be estimated with satisfactory accuracy. Furthermore, approximate equations are derived for easier estimation.     

Pulsed laser irradiation impact on two marine diatoms Skeletonema costatum and Chaetoceros gracilis

The ability of pulsed laser irradiations to cause damage on the biofouling organisms is recently being investigated. If this technique is employed in industries such as power generation wherein a large quantity of water is being used for the cooling purpose, many organisms other than the targeted would get affected. In this study, we have investigated the damage caused by the pulsed laser irradiations from an Nd:YAG laser (fluence 0.1J/cm(2)) for varying durations such as 2, 5, 10, 30, 60 and 300 s on two marine diatom species namely Skeletonema costatum and Chaetoceros gracilis. Upon exposure to low power laser irradiations, these diatom species showed mortalities between 52.6+/-9.3% to 97.7+/-3.1% in the case of S. costatum and 57.8+/-2.5% to 98.9+/-0.6% in the case of C. gracilis for 2 and 300 s of irradiations, respectively. The mortality increased with the increase in the duration of laser irradiation. The estimation of the chlorophyll a concentration in the irradiated samples showed a considerable reduction varying between 9.8% and 57% in C. gracilis and 3% and 70.3% in S. costatum for 2 and 300 s of irradiations, respectively. The laser-survived cells grew as the non-irradiated (control) samples. C. gracilis frustules were broken by the laser whilst, the cell materials were drained out of the frustules in the case of S. costatum. The study therefore showed that the low power pulsed laser irradiations could cause significant damage on the two species of planktonic diatoms.     

Spectral interference Mirau microscope with an acousto-optic tunable filter for three-dimensional surface profilometry

A nonmechanical scanning Mirau-type spectral interference microscope has been developed for the measurement of three-dimensional surface profiles of discontinuous objects. An acousto-optic tunable filter (AOTF) is used as a high-resolution spectral filter, which scans the optical frequency of the broadband light emitted from a superluminescent diode. To generate spectral fringes that make full use of the limited coherence length of the filtered light we unbalanced the Mirau interferometric system by positioning the reference mirror nearly halfway between the top and the bottom of the step height. When the frequency of the broadband light source is scanned by an AOTF, the interference fringes move in opposite directions on the top and the bottom of the object. To uniquely determine the sign of the fringe movement over the large area of the object, we developed a three-dimensional Fourier-transform technique, and from the detected sign of the fringe movement and phase information, we determined the three-dimensional step height. Experimental results of the measurement of 100-microm step height are presented. The main advantages of the proposed system are that it provides nonmechanical scanning and a large measurement range without ambiguity in the sign of the phase.     

Analysis of specular resonance in dielectric bispheres using rigorous and geometrical-optics theories

We have recently identified the resonant scattering from dielectric bispheres in the specular direction, which has long been known as the specular resonance, to be a type of rainbow (a caustic) and a general phenomenon for bispheres. We discuss the details of the specular resonance on the basis of systematic calculations. In addition to the rigorous theory, which precisely describes the scattering even in the resonance regime, the ray-tracing method, which gives the scattering in the geometrical-optics limit, is used. Specular resonance is explicitly defined as strong scattering in the direction of the specular reflection from the symmetrical axis of the bisphere whose intensity exceeds that of the scattering from noninteracting bispheres. Then the range of parameters for computing a particular specular resonance is specified. This resonance becomes prominent in a wide range of refractive indices (from 1.2 to 2.2) in a wide range of size parameters (from five to infinity) and for an arbitrarily polarized light incident within an angle of 40 degrees to the symmetrical axis. This particular scattering can stay evident even when the spheres are not in contact or the sizes of the spheres are different. Thus specular resonance is a common and robust phenomenon in dielectric bispheres. Furthermore, we demonstrate that various characteristic features in the scattering from bispheres can be explained successfully by using intuitive and simple representations. Most of the significant scatterings other than the specular resonance are also understandable as caustics in geometrical-optics theory. The specular resonance becomes striking at the smallest size parameter among these caustics because its optical trajectory is composed of only the refractions at the surfaces and has an exceptionally large intensity. However, some characteristics are not accounted for by geometrical optics. In particular, the oscillatory behaviors of their scattering intensity are well described by simple two-wave interference models.     

Microassembly of semiconductor three-dimensional photonic crystals

Electronic devices and their highly integrated components formed from semiconductor crystals contain complex three-dimensional (3D) arrangements of elements and wiring. Photonic crystals, being analogous to semiconductor crystals, are expected to require a 3D structure to form successful optoelectronic devices. Here, we report a novel fabrication technology for a semiconductor 3D photonic crystal by uniting integrated circuit processing technology with micromanipulation. Four- to twenty-layered (five periods) crystals, including one with a controlled defect, for infrared wavelengths of 3-4.5 microm, were integrated at predetermined positions on a chip (structural error <50 nm). Numerical calculations revealed that a transmission peak observed at the upper frequency edge of the bandgap originated from the excitation of a resonant guided mode in the defective layers. Despite their importance, detailed discussions on the defective modes of 3D photonic crystals for such short wavelengths have not been reported before. This technology offers great potential for the production of optical wavelength photonic crystal devices.     

Determination of standard gibbs energies of formation of Cr2N and CrN

The standard Gibbs energies of formation of Cr₂N and CrN have been measured by an equilibration technique and by using thermogravimetry and differential thermal analysis (TG-DTA) at temperatures ranging from 1232 to 1523 K. The results are expressed as follows:

An improved procedure of electron microscopic in situ hybridization for detecting adenovirus DNA

Electron microscopic in situ hybridization (EM-ISH) is a useful method in determining the localization of a specific nucleic acid at the ultrastructural level. Since the EM-ISH protocol includes many steps, no standard protocol for EM-ISH is available yet. In this study, we optimized quantitatively the critical conditions with respect to embedding resin, nucleic acid labeling and hybridization reaction time, by using adenovirus-infected cells as the indicator cells. The optimal detection of an adenovirus-specific nucleic acid was obtained by overnight hybridization reaction on sections embedded in Lowicryl K4M resin. Random-primed-labeled probes improved the reactivity. At least 60% of virus particles in paracrystalline arrays was found to contain viral DNA. These arrays in adenovirus-infected cells are useful in evaluating quantitatively the efficiency of protocols of EM-ISH.     

Synthesis and characterization of K2NiF4-type CaLnCoO4 (Ln = Sm and Gd)

K₂NiF₄-type CaLnCoO₄ (Ln = Sm and Gd) has been synthesized at 1173 or 1223 K in air using citric acid (CA) and ethylene glycol (EG). CaLnCoO₄ (Ln = Sm and Gd) has an orthorhombic structure with the space group Bmab. The average particle sizes are approximately 300 nm for CaSmCoO₄ and approximately 170 nm for CaGdCoO₄, respectively. The global instability index (GII) indicates that the crystal structure of CaGdCoO₄ is more stable than that of CaSmCoO₄. CaLnCoO₄ (Ln = Sm and Gd) is a p-type semiconductor and shows paramagnetic behavior above 5 K. The 1/χ-T curve of CaSmCoO₄ deviates from the Curie-Weiss law, whereas the 1/χ-T curve of CaGdCoO₄ follows the Curie-Weiss law in the temperature range of 5 ≤ T ≤ 300 K. From the values of the observed effective magnetic moment (μ_eff) of CaLnCoO₄ (Ln = Sm and Gd), it is considered that the spin state of the Co³⁺ ion is low.