Development of fabrication process for Ag/polydiacetylene (core/shell) hybridized nanocrystals

Core/shell hybridized nanocrystals composed of Ag nanoparticle core and polydiacetylene shell were fabricated successfully by means of “co-reprecipitation/microwave irradiation method”. The hybridized nanocrystals were characterized using transmission electron microscopy (TEM) observation and UV–vis absorption spectroscopy. UV–vis spectral measurements revealed that polydiacetylene shell was the red phase while π-conjugated backbone is distorted. Detailed mechanism of formation of the red phase was discussed.     

A unified adaptive oculomotor control model

In order to understand mechanisms of oculomotor control systems, an oculomotor model based on eye's anatomical structure and physiological mechanism is developed. In this model, various types of eye movements are considered, and two learning systems, one based on adaptive characteristics of flocculus and the other on vestibular nuclei's are developed. The role of neural paths from ocular muscle stretch receptors into flocculus, which were thought to not contribute in eye movement, is discussed in detail from the viewpoint of system control engineering. The experimental results through simulation show good control performance of the proposed model. Copyright © 2001 John Wiley & Sons, Ltd.     

The use of indoline dyes in a zinc oxide dye-sensitized solar cell

The effects of the position and the type of carboxyl anchor group in double rhodanine-type indoline dyes on the performance of a zinc oxide dye-sensitized solar cell were examined. The optimum position for the carboxymethyl group was on the inner rhodanine moiety; a carboxymethyl group gave optimum results among carboxymethyl, -ethyl, and -propyl derivatives.     

Development of a new X-ray source using backscattered X-ray with the use of a cold cathode

The development of an intense X-ray source using backscattered X-ray produced using an advanced electrode configuration is described. The electrodes were composed of field emitters deposited on a wire mounted on a perforated plate as the cathode and a copper plate as the anode. Electrons from these emitters collided with the copper plate and X-ray was generated at collision points. The backscattered X-ray in the direction normal to the electron trajectory through a hole in the anode escaped from the vacuum chamber through a beryllium window. Continuous and characteristic X-rays were detected at an applied voltage lower than that of a conventional X-ray source from 3.0 to 9.4 kV, respectively. Moreover, the X-ray dosage measured with a survey meter reached 0.95 mSv/h at 5.0 kV of applied voltage. The transmission images of three types of material used as an X-ray source for the X-ray imaging system indicate three advantages; low power consumption, focal point controllable by adjusting applied voltage, and photographable motion picture of X-ray transmission.     

Crosslinking of PVC and NBR blends

The purpose of our work is to control the interfacial bonds between PVC and NBR using the ammonium salts of triazine thiols and dithiodimorpholine (DTDM) and thereby reveal the relation between the interfacial bonds and the final mechanical properties of products. In the experimental work a two-stage process was used. At first, an NBR/PVC blend was mixed with a mono-tetra-n-butylammonium salt of triazine trithiol at a temperature of 100°C on a two-roll mill to give the branching structure of triazine thiols into PVC. In the second stage branched NBR/PVC reacted with DTDM to afford the branched PVC containing trithiomorphonyl groups. In the presence of ZnO at 160°C trithiomorphonyl groups react with NBR to form a crosslinking structure between NBR and PVC. The mechanical properties of cured NBR/PVC blends were markedly improved by the treatment process and after addition of tetramethylthiuram monosulphide also. The mechanical properties were not improved by increasing the concentration of TT-TBA (tetrabutylammonium salt of 1,3,5-triazine-2,4,6-trithiol) over 4.2 phr.     

A Fail-safe Logic Operator Using an Insulated Planar Transformer

A fail-safe logic circuit must switch the output signal to the logical value “0” when an operation circuit fails. A transformer has such favorable characteristics for fail-safe logic circuits as only the magnetic flux change is transmitted and a superposition of magnetic flux is realized. Thus those characteristics arc applied to a failsafe logic operator. A new fail-safe logic operator using an insulated planar transformer was developed for a fail-safe majority operation and a fail-safe interlocking. In this paper, the principle, structure, design and fundamental characteristics of the new fail-safe logic operator are described.     

Preparation of plasma-polymerized membranes from fluoroalkyl acrylates and methacrylates and gas permeability through the membranes

Summary Plasma-polymerized membranes were prepared from fluoroalkyl acrylates and methacrylates by two different directions of monomer injection and the permeation rates of O₂ and n₂ through the membranes were investigated. The chemical structure and composition of the plasmapolymerized membranes varied significantly by the direction of monomer injection. The optimum plasma conditions to yield maximum gas separation characteristics was obtained by the remote plasma excitation at the W/FM value of 20 J/mg, where W is the discharge power, F is the monomer flow rate and M is the molecular weight of the monomer.     

Studies of aqueous resins

Summary Polyesters were modified by introducing small amounts of sodium sulfonate groups as hydrophilic groups in their backbones. Stable aqueous dispersions of the polyesters could be obtained by using 2-butoxyethanol (BEA) as a cosolvent. To clarify the role of the cosolvent, they were separated into two layers, polymer and supernatant layers, byultracentrifugation. Cosolvent contents were found to be different in the former and latter layers; i.e., the contents of BEA in the former layer are low in the case of crystalline polyesters and high in the case of noncrystalline ones. Characteristics of the dispersions such as viscosity are strongly affected by the content of the cosolvent.     

Studies of the network structure of rubber vulcanizates by cryoscopic methods: 2

The freezing point depression, ΔT, of swollen DCP-, TT- and sulphur-cured natural rubber in benzene was observed. The dependence of the parameter, a_H, introduced by Kuhn, was not affected by the type of structure of crosslink sites. It was found from the comparison of the experimental results and scaling law that a_H can reflect not only the difference in three-dimensional structure of network between a degraded and an undegraded rubber vulcanizates but also the difference in degraded network structures between rubber samples with various conditions of degradation.