Influence of combined magnetic and electric fields on the behaviour of polyelectrolyte hydrogel

The behaviour of polyelectrolyte gel under the influence of combined electric and magnetic fields has been studied. It is shown that the rate of gel contraction stimulated by an electric field can be significantly changed under the action of an external magnetic field. A qualitative interpretation of the observed phenomenon is given. © 2001 Society of Chemical Industry     

Comparative Analysis of Coding and Non-Coding Features within Insect Tolerance Loci in Wheat with Their Homologs in Cereal Genomes

Food insecurity and malnutrition have reached critical levels with increased human population, climate fluctuations, water shortage; therefore, higher-yielding crops are in the spotlight of numerous studies. Abiotic factors affect the yield of staple food crops; among all, wheat stem sawfly (Cephus cinctus Norton) and orange wheat blossom midge (Sitodiplosis mosellana) are two of the most economically and agronomically harmful insect pests which cause yield loss in cereals, especially in wheat in North America. There is no effective strategy for suppressing this pest damage yet, and only the plants with intrinsic tolerance mechanisms such as solid stem phenotypes for WSS and antixenosis and/or antibiosis mechanisms for OWBM can limit damage. A major QTL and a causal gene for WSS resistance were previously identified in wheat, and 3 major QTLs and a causal gene for OWBM resistance. Here, we present a comparative analysis of coding and non-coding features of these loci of wheat across important cereal crops, barley, rye, oat, and rice. This research paves the way for our cloning and editing of additional WSS and OWBM tolerance gene(s), proteins, and metabolites.     

Task-based comparison of inverse methods in magnetoencephalography

Magnetoencephalography (MEG) provides unique insights into the spatio-temporal dynamics of neural activation in the human brain. Unfortunately, the accuracy with which neural sources can be localized is limited by the highly illposed nature of the inverse problem. A large number of inverse methods have been proposed that deal with this illposedness using a range of different modeling and regularization procedures. Here we describe an objective task-based framework for comparing different inverse methods. Using the free-response receiver operating characteristic (FROC) we compare the performance of matched filters, cortically constrained dipole scanning, and minimum norm imaging methods for the task of detecting focal cortical activation. Our results indicate that the scanning methods outperform matched filters and minimum norm imaging for the case of one and two 2 cm2 patches of cortical activity when the dynamics of the two patches are both strongly and weakly correlated and irrespective of the spacing of the two activated regions.     

Tribological and corrosion behaviour of electroless Ni-B coating possessing a blackberry like structure

This study aims to evaluate the tribological and corrosion properties of the electroless Ni-B coating deposited on AISI 304 stainless steels. The microstructure of the coating was characterized using x-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectrometry (SEM-EDS). XRD analysis revealed that the prepared coating possessed an amorphous character. SEM-EDS investigation also indicated that a non-stoichiometric Ni-B coating was deposited with a columnar growth mechanism on the stainless steel substrate and the morphology of the growth surface was blackberry-like. The hardness and tribological properties were characterized by microhardness and a pin-on-disc wear test. The electroless Ni-B coated sample had a higher degree of hardness, a lower friction coefficient and a lower wear rate than the uncoated substrate. The electrochemical potentiodynamic polarization method was used to evaluate the corrosion resistance of the coating. The electroless Ni-B coating offered cathodic protection on the substrate by acting as a sacrificial anode although it was electrochemically more reactive than the stainless steel substrate.     

XPS investigation of a CdS-based photoresistor under working conditions: operando-XPS

A noncontact chemical and electrical measurement X-ray photoelectron spectroscopy (XPS) technique is performed to investigate a CdS-based photoresistor during its operation. The main objective of the technique is to trace chemical- and location-specified surface potential variations as shifts of the XPS Cd 3d(5/2) peak position without and under photoillumination with four different lasers. The system is also modeled to extract electrical information. By analyzing the measured potential variations with this model, location-dependent resistance values are represented (i) two dimensionally for line scans and (ii) three dimensionally for areal measurements. In both cases, one of the dimensions is the binding energy. The main advantage of the technique is its ability to assess an element-specific surface electrical potential of a device under operation based on the energy deviation of core level peaks in surface domains. Detection of the variations in electrical potentials and especially their responses to the energy of the illuminating source in operando, is also shown to be capable of detecting, locating, and identifying the chemical nature of structural and other types of defects.     

The analysis of thermoluminescent glow peaks of natural calcite after beta irradiation

In this study, the thermoluminescence properties of natural calcite samples were examined in detail. The glow curve of the sample irradiated with beta radiation shows two main peaks, P1 (at 115 °C) and P4 (at 254 °C). The additive dose, variable heating rate, computer glow curve deconvolution, peak shape and three point methods have been used to evaluate the trapping parameters, namely the order of kinetics (b), activation energy (E) and the frequency factor (s) associated with the dosimetric thermoluminescent glow peaks (P1 and P4) of natural calcite after different dose levels with beta irradiation.     

Hydrocracking of Goudron in the Presence of a Suspended Natural Catalyst

The main results of hydrocracking of goudron under reduced pressure in the presence of a suspended catalyst have beenanalyzed. It was investigate the influence of temperature to hydrocracking process of goudron. It was determined that with increasing of temperature from 400 ℃ to 440 ℃ （0.5 MPa pressure） the yield of light oil products increased from 31.39% to 61% mass.     

Highly selective ion-imprinted particles for solid-phase extraction of Pb ions

The Pb²⁺-imprinted (PHEMAC-Pb²⁺) particles were prepared by bulk polymerization as a solid-phase extraction (SPE) adsorbent. N-methacryloyl-(l)-cysteine (MAC) was used as functional monomer to have a well-shaped molecular geometry between MAC monomer and Pb²⁺ ions that provide molecular recognition based on well fitted cavities for Pb²⁺ ions after removal of template ions. The PHEMAC-Pb²⁺ particles were characterized and the applicability of these particles was investigated for the solid-phase extraction of Pb²⁺ ions from aqueous solutions and environmental samples. The PHEMAC-Pb²⁺ particles with a size range of 50–200 µm have a rough surface and macropores in bulk structure. The adsorption capacity of the PHEMAC-Pb²⁺ particles is relatively low (2.01 mg/g). However, the high selectivity towards competitive ions (Cd²⁺, Ni²⁺ and Cu²⁺) promises the PHEMAC-Pb²⁺ particles an alternative SPE adsorbent in literature. The relative selectivity coefficients of PHEMAC-Pb²⁺ particles for Pb²⁺/Ni²⁺, Pb²⁺/Cd²⁺ and Pb²⁺/Cu²⁺ were almost 71, 117 and 192 times greater than that of non-imprinted (PHEMAC) particles, respectively. Moreover, the reusability of the PHEMAC-Pb²⁺ particles was tested for several times and no significant loss in adsorption capacity was observed. The accuracy of the proposed procedure was also verified by the determination of Pb²⁺ ions in the certified reference material, LGC 6137 Estuarine sediment.