Direct ethanol production from barley beta-glucan by sake yeast displaying Aspergillus oryzae beta-glucosidase and endoglucanase

Three beta-glucosidase- and two endoglucanase-encoding genes were cloned from Aspergillus oryzae, and their gene products were displayed on the cell surface of the sake yeast, Saccharomyces cerevisiae GRI-117-UK. GRI-117-UK/pUDB7 displaying beta-glucosidase AO090009000356 showed the highest activity against various substrates and efficiently produced ethanol from cellobiose. On the other hand, GRI-117-UK/pUDCB displaying endoglucanase AO090010000314 efficiently degraded barley beta-glucan to glucose and smaller cellooligosaccharides. GRI-117-UK/pUDB7CB codisplaying both beta-glucosidase AO090009000356 and endoglucanase AO090010000314 was constructed. When direct ethanol fermentation from 20 g/l barley beta-glucan as a model substrate was performed with the codisplaying strain, the ethanol concentration reached 7.94 g/l after 24 h of fermentation. The conversion ratio of ethanol from beta-glucan was 69.6% of the theoretical ethanol concentration produced from 20 g/l barley beta-glucan. These results showed that sake yeast displaying A. oryzae cellulolytic enzymes can be used to produce ethanol from cellulosic materials. Our constructs have higher ethanol production potential than the laboratory constructs previously reported.     

Significant Roles of Regulatory T Cells and Myeloid Derived Suppressor Cells in Hepatitis B Virus Persistent Infection and Hepatitis B Virus-Related HCCs

The adaptive immune system, including type1 helper T cells (Th1 cells), cytotoxic T lymphocytes (CTLs), and dendritic cells (DCs), plays an important role in the control of hepatitis B virus (HBV). On the other hand, regulatory T cells (Tregs) and myeloid derived suppressor cells (MDSCs) suppress the immune reaction in HBV and hepatocellular carcinoma (HCC). Excessive activation of immune suppressive cells could contribute to the persistent infection of HBV and the progression of HCC. The frequency and/or function of Tregs could affect the natural course in chronic hepatitis B patients and the treatment response. In addition to the suppressive function of MDSCs, MDSCs could affect the induction and function of Tregs. Therefore, we should understand in detail the mechanism by which Tregs and MDSCs are induced to control HBV persistent infection and HBV-related HCC. Immune suppressive cells, including Tregs and MDSCs, contribute to the difficulty in inducing an effective immune response for HBV persistent infection and HBV-related HCC. In this review, we focus on the Tregs and MDSCs that could be potential targets for immune therapy of chronic hepatitis B and HBV-related HCC.     

DISPERSION OF GAS AND LIQUID IN BUBBLE COLUMNS OF HOMOGENEOUS BUBBLE FLOW REGIME

Mean gas holdup, lateral distribution of gas holdup and axial mixing of gas and liquid were measured in bubble columns of 12 and 19cm i.d. The lateral distribution of gas holdup was strongly dependent on the flow regimes in the column. The axial mixing of liquid in the homogeneous bubble flow regime was much smaller than that in the heterogeneous bubble flow regime, and was not expressed by existing correlations. The axial mixing of liquid in the homogeneous bubble flow and the intermediate flow regime was simulated with a flow model based on the lateral distribution of buoyancy force and the effective viscosity. The axial mixing of gas was larger than that of liquid.     

Combinatorial Measurement of CDKN1A/p21 and KIF20A Expression for Discrimination of DNA Damage-Induced Clastogenicity

In vitro mammalian cytogenetic tests detect chromosomal aberrations and are used for testing the genotoxicity of compounds. This study aimed to identify a supportive genomic biomarker could minimize the risk of misjudgments and aid appropriate decision making in genotoxicity testing. Human lymphoblastoid TK6 cells were treated with each of six DNA damage-inducing genotoxins (clastogens) or two genotoxins that do not cause DNA damage. Cells were exposed to each compound for 4 h, and gene expression was comprehensively examined using Affymetrix U133A microarrays. Toxicogenomic analysis revealed characteristic alterations in the expression of genes included in cyclin-dependent kinase inhibitor 1A (CDKN1A/p21)-centered network. The majority of genes included in this network were upregulated on treatment with DNA damage-inducing clastogens. The network, however, also included kinesin family member 20A (KIF20A) downregulated by treatment with all the DNA damage-inducing clastogens. Downregulation of KIF20A expression was successfully confirmed using additional DNA damage-inducing clastogens. Our analysis also demonstrated that nucleic acid constituents falsely downregulated the expression of KIF20A, possibly via p16 activation, independently of the CDKN1A signaling pathway. Our results indicate the potential of KIF20A as a supportive biomarker for clastogenicity judgment and possible mechanisms involved in KIF20A downregulation in DNA damage and non-DNA damage signaling networks.     

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

Reaction joining of SiC ceramics using TiB2-based composites

SiC ceramics were reaction joined in the temperature range of 1450–1800 °C using TiB₂-based composites starting from four types of joining materials, namely Ti–BN, Ti–B₄C, Ti–BN–Al and Ti–B₄C–Si. XRD analysis and microstructure examination were carried out on SiC joints. It is found that the former two joining materials do not yield good bond for SiC ceramics at temperatures up to 1600 °C. However, Ti–BN–Al system results in the connection of SiC substrates at 1450 °C by the formation of TiB₂–AlN composite. Furthermore, nearly dense SiC joints with crack-free interface have been produced from Ti–BN–Al and Ti–B₄C–Si systems at 1800 °C, i.e. joints TBNA80 and TBCS80, whose average bending strengths are measured to be 65 MPa and 142 MPa, respectively. The joining mechanisms involved are also discussed.     

Moderately high speed impact of two identical spheres

This paper deals with impacts between two identical spheres in moderately high speed range. Impact of spheres is one of basic problems in mechanical dynamics. Severity of impact is generally characterized by the coefficient of restitution. However, influence of material property on the coefficient of restitution has not been clarified yet. The authors previously investigated direct central impacts of two identical spheres in low speed range and revealed that strain rate sensitivity of material properties could not be ignored even in the low speed impacts. Therefore, this paper investigates the direct central impact of two identical spheres in higher speed range. The impact experiments were performed in range of impact speed 10 m/s–20 m/s by using air-gun setup. It was confirmed that the expressions for the coefficient of restitution and the contact time derived from the low speed impact remained effective in the moderately high speed range. Then numerical simulations by using Finite Element Method (F.E.M) have been carried out, in which the material properties and the strain rate effect were taken into account. The coefficient of restitution, contact time, sphere’s compression and contact circle diameter obtained by experiments and F.E.M. were compared and they matched well. Contact pressure distributions at maximum contact force were investigated. The contact pressure at sphere center varied little with impact speed but the contact pressure increased with impact speed near contact edge. Theoretical expression for prediction of the coefficient of restitution proposed by C. Thornton was examined to the experimental results of this study. To provide an accurate prediction, it is necessary to estimate the contact pressure depending on material properties. Finally, the Meyer analysis was applied to the case of this study and it was found that the Meyer’s law holds in the moderately high speed impact between two identical spheres.     

Microstructure and mechanical properties of Pt-added and Pd-added Zr-20Nb alloys and their metal release in 1 mass% lactic acid solution

The effects of Pt and Pd addition to a Zr-20Nb alloy on its microstructure and mechanical property, as well as the elution of metals from the alloys in lactic acid solution, were investigated. The microstructure was characterized with an X-ray diffractometer (XRD), an optical microscope (OM), and a transmission electron microscope (TEM). The mechanical properties were evaluated by a tensile test. The β phase is dominantly observed in the Zr-20Nb as well as in the Pt-added and Pd-added Zr-20Nb alloys. Needle-like microstructures are observed in equiaxed grains in all alloys. Pd addition to the Zr-20Nb alloy suppresses ω phase formation more than Pt addition does. The 0.2% offset yield strength and the ultimate tensile strength of the Pt-added and Pd-added Zr-20Nb alloys increase with the Pt and Pd concentrations. XRD analysis revealed that the lattice parameter of β-Zr in the Pt-added and Pd-added Zr-20Nb alloys decreases with the Pt and Pd concentrations. Pt and Pd solute in β-Zr as a substitutional element and contribute to the increase in the strength by solid solution hardening. The addition of 2Pt and 2Pd to the Zr-20Nb alloy also improves metal elution from the alloys in lactic acid solution.     

A passive EMI filter with access to the ungrounded motor neutral line—Its effect on attenuating bearing current

This paper describes the effect of a passive EMI filter on preventing bearing current from flowing inside an inverter‐driven motor. Motor‐bearing damage is often caused by bearing currents resulting from the breakdown of grease films in the motor bearing. The high‐frequency common‐mode voltage generated by the PWM inverter induces a shaft voltage between the rotor and the frame. When the shaft voltage exceeds the breakdown voltage of the grease films, a destructive instantaneous discharge current with a peak value of about 1 A flows through the motor bearing. The passive EMI filter, which is unique in access to the motor neutral line, can reduce the shaft voltage as a result of eliminating the high‐frequency common‐mode voltage from the motor terminals. Hence, no breakdown occurs in the grease film, so that no bearing current flows. The viability and effectiveness of the passive EMI filter is verified by experimental results obtained from a 400‐V, 3.7‐kW laboratory system. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(2): 78– 87, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20489