Hydrolysis behavior of aluminum nitride in various solutions

The AlN powder was immersed in deionized water, HCl aq, NaOH aq and H₃PO₄ aq to investigate their hydrolysis behavior at 283 to 373 K. The pH of the solutions were not varied at the initial stage in the case of deionized water, and they increased abruptly after the incubation time with evolution of NH₃. Time until the evolution of NH₃ decreased with increasing temperature. The hydrolysis at the higher temperature was different from at the lower. Below 351 K a crystalline bayerite was produced on the surface of AlN particle, while a crystalline boehmite was produced at higher than 351 K. The AlN powder was hydrolyzed more efficiently in HCl aq and NaOH aq compared with in the deionized water. While, H₃PO₄ aq restrained hydrolysis of AlN powder.     

A simple method for measuring the relative permittivity of printedcircuit board materials

This paper presents a simple method to measure the relative permittivity of glass-epoxy printed circuit boards (PCBs). In this method, the relative permittivity as a function of frequency is measured using an actual PCB. In order to estimate the relative permittivity, the reflection coefficient is measured with a network analyzer. The relative permittivity is calculated by observing the frequencies of the resonant cavity modes. We show that the relative permittivity of an FR-4 sample decreases from 4.3 to 4.2 at frequencies from 300 MHz to 2 GHz     

Synthesis of soluble poly(9,10-dihydrophenanthrene-2,7-diyl)s. A new class of luminescent poly(p-phenylene)s with ethylene type bridges

Poly(9,10-dihydrophenanthrene-2,7-diyl)s with -OSi(R)₂(R′) groups at the 9,10-positions were synthesized by dehalogenative polycondensation of the corresponding monomers by using a zerovalent nickel complex. They showed number average molecular weights (M_n's) of 9800-69,000 and high quantum yields (62%-quantitative) in photoluminescence. Palladium catalyzed copolymerization of 2,7-dibromo-9,10-dihydrophenanthrene having -OCH₃ or -OSi(R)₂(R′) groups at the 9,10-positions with diethynyl- or diboronic-aromatic compounds also gave photoluminescent polymers with high quantum yields.     

Highly reliable oxide‐semiconductor TFT for AMOLED displays

Abstract— The stability and reliability of oxide‐semiconductor TFTs were investigated. The contact material to the oxide semiconductor affected the thermal stability of the TFT, and a molybdenum‐contact source/drain showed good stability. And the passivating film and TFT structure affected the stability against bias stress and humidity stress, and dc‐sputtered Al²O³ passivation and fully covered channel structure with an etching stopper or source/drain showed good reliability. Moreover, high photo‐stability was confirmed by the bias‐enhanced photo‐irradiation stress test. An 11.7‐in.‐diagonal qHD AMOLED display was demonstrated to provide an applicable solution for a large‐sized OLED and an ultra‐high‐definition LCD‐TV mass production.     

Preparation of π-conjugated polymers consisting of 1-aminopyrrole and 4-amino-1,2,4-triazole units

π-Conjugated polymers based on 1-aminopyrrole and 4-amino-1,2,4-triazole were prepared. Pd-catalyzed organometallic polycondensation gave poly(arylene-ethynylene) (PAE)-type π-conjugated polymers consisting of BOC-protected 4-amino-1,2,4-triazole (Taz(BOC)) units (BOC = t-butoxycarbonyl). The number average molecular weights (M_n) were determined to be 5200–19,200 using GPC. An alternating copolymer of Taz(BOC) and bithiophene (Th–Th) units, P(Taz(BOC)-Th-Th)_n-Pd, with an M_n of 10,800 was also prepared by Pd-catalyzed organometallic polycondensation. (Taz(BOC)-Th-Th)_n-Pd showed a UV–Vis absorption peak at λ_max = 425 nm, which is reasonable for a π-conjugated five-membered ring polymer with a coplanar structure. The deprotection of the BOC group of the polymers proceeded at 200 °C; this BOC-deprotection was investigated using a model compound. The optical and electrochemical properties of the π-conjugated polymers are reported.     

The effect of post-treatments on the powder morphology of titanium dioxide (TiO2) powders synthesized for cold spray

In this study, a novel synthesis method of TiO₂ powders that can be cold sprayed is presented. The synthesis technique is a simple hydrolysis method of titanyl sulfate (TiOSO₄) in distilled water with a small addition of inorganic salt. At a relatively low hydrolysis temperature, pure anatase TiO₂ can be obtained and post-synthesis treatments (annealing or hydrothermal treatment) do not alter this phase structure. The powder is agglomerated with fine nano primary particles, with different post-synthesis treatments leading to different TiO₂ nanostructures. Annealing causes a significant growth of primary particles with the existence of internal pores within a particle. On the other hand, hydrothermal treatment produces a unique oriented agglomeration structure where the primary particles are agglomerated in one single crystal axes. It is believed that the synergistic effect of inorganic ion adsorption and post-treatments results in the observed nanostructures. After cold spraying, it is revealed that these TiO₂ powders could be deposited via supersonic solid phase deposition (cold spray).     

A 16-Mb Toggle MRAM With Burst Modes

This paper describes a recently developed 16-Mb toggle magnetic random access memory (MRAM). It has 100-MHz burst modes that are compatible with a pseudo-SRAM even though the toggle cell requires reading and comparing sequences in write modes. To accelerate operating clock frequency, we propose a distributed-driver wide-swing current-mirror scheme, an interleaved and pipelined memory-array group activation scheme, and a noise-insulation switch scheme. These circuit schemes compensate the toggle cell timing overhead in write modes and maintain write-current precision that is essential for the wide operational margin of MRAMs. Because toggle cells are very resistant to write disturbance errors, we designed the 16-Mb MRAM to include a toggle MRAM cell. The MRAM was fabricated with 0.13-mum CMOS and 0.24-mum MRAM processes with five metal layers.     

Improvement in Oxidation Resistance of Stainless Steel by Molten-Salt Electrodeposition of La

Improvement in the oxidation resistance of SUS304 stainless steel was accomplished by electrodeposition of La in a molten salt. The electrolysis of La was conducted using a potentiostatic-polarization method in an equimolar NaCl–KCl melt containing 3.5 mol. LaF ₃ at 1023 K. Observation of the specimen surface after polarization at –1.8 V (vs. Ag/Ag⁺ (0.1)) for 0.18 ks showed that La particles were uniformly dispersed on the surface. The oxidation resistance of the electrodeposited stainless steel was significantly improved as compared with the untreated stainless steel. The scale formed on the untreated stainless steel after oxidation was thick and consisted of Fe₂O₃ and Fe₃O₄, whereas the scale formed on the elecrodeposited stainless steel was extremely thin, and mainly consisted of Cr₂O₃.     

Monoclonal antibodies against pig ovarian follicular granulosa cells induce apoptotic cell death in cultured granulosa cells

Two monoclonal antibodies capable of inducing granulosa cell apoptosis were produced against granulosa cells prepared from antral follicles of pig ovaries. The healthy follicles, 4-5 mm in diameter, were dissected from the ovaries of gilts, and then granulosa cells were isolated. BALB/c female mice were immunized with the isolated granulosa cells. Antibodies against the granulosa cells were detected by immunofluorescent staining using frozen ovarian sections. The isolated spleen cells prepared from immunized mice producing antibodies against the granulosa cells were fused with Sp2/O-Ag 14 mouse myeloma cells by standard hybridization techniques. Two hybridoma clones, PFG-1 and PFG-2, which produced specific IgM antibodies against granulosa cells were selected. Western blotting analysis revealed that PFG-1 and PFG-2 antibodies specifically recognized cell-membrane proteins with molecular weights of 55 and 70 kD and isoelectric points of 5.9 and 5.4, respectively. The monoclonal antibodies immunohistochemically reacted with granulosa cells of healthy follicles. When the isolated granulosa cells prepared from healthy follicles were cultured in medium containing 0.1 or 10 micrograms/m/PFG-1 or PFG-2 antibodies, respectively, the cells underwent apoptosis as determined by nuclear morphology, DNA electrophoresis and flow cytometric analysis. In conclusion, these two monoclonal antibodies against granulosa cells have cell-killing activity in cultured granulosa cells.