Microstructure of Interfacial Region Between Cold-Sprayed Copper Coating and AlN Substrate Coated with Sputtered Titanium and Copper

Cold spraying has been developed as a high-quality coating technique. In this article, copper is deposited on an AlN substrate coated by the sputtering of titanium and copper at a low pressure of less than 1.0 MPa, making this approach suitable for a wide range of engineering applications. In order to understand the adhesion mechanism at the atomic scale, the interfacial regions are carefully observed in thin foil samples from the cross sections of the specimens with a HREM. We find a unique wavy boundary between the sputtered titanium and the sputtered copper. It is assumed that the shear-instability phenomenon occurs due to the cold-spraying process and influences the adhesive strength. Furthermore, the cold-sprayed copper particles are connected directly without any oxidation layer due to the appearance of new metallic surfaces during the impact process. The TEM data clearly reveal the phenomena and mechanisms related to the impact of powder sprayed on the substrate.     

Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials

A variety of metallic powder particles were thermally sprayed onto the mirror polished metallic substrate surface and the effect of both substrate temperature and ambient pressure on the flattening behavior of the particle was systematically investigated. In the flattening behavior of the sprayed particle onto the substrate surface, critical conditions were recognized both in the substrate temperature and ambient pressure. That is, the flattening behavior changed transitionally on that critical temperature and pressure range, respectively. A transition temperature, T _t, and transition pressure, P _t, were defined and introduced, respectively for those critical conditions. The fact that the dependence of both transition temperature and transition pressure on the sprayed particle material had similar tendency indicated that the wetting of the substrate by the molten particles seemed to be a domination in the flattening. Three-dimensional transition curvature by combining both transition temperature and transition pressure dependence was proposed as a practical and effective controlling principle of the thermal spray process. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

Improvement in Oxidation Resistance of Stainless Steel by Molten-Salt Electrodeposition of La

Improvement in the oxidation resistance of SUS304 stainless steel was accomplished by electrodeposition of La in a molten salt. The electrolysis of La was conducted using a potentiostatic-polarization method in an equimolar NaCl–KCl melt containing 3.5 mol. LaF ₃ at 1023 K. Observation of the specimen surface after polarization at –1.8 V (vs. Ag/Ag⁺ (0.1)) for 0.18 ks showed that La particles were uniformly dispersed on the surface. The oxidation resistance of the electrodeposited stainless steel was significantly improved as compared with the untreated stainless steel. The scale formed on the untreated stainless steel after oxidation was thick and consisted of Fe₂O₃ and Fe₃O₄, whereas the scale formed on the elecrodeposited stainless steel was extremely thin, and mainly consisted of Cr₂O₃.     

Alternating copolymer of bithiophene and dialkylbithiazole and its tendency to align on the surfaces

New five-membered ring π-conjugated polymers composed of 2,2′-bithiophene and 4,4′-dialkyl-2,2′-bithiazole units were prepared. The polymers were soluble in 1,2-dichlorobenzene and showed a UV-vis peak at about 490 nm above 120 °C. Cooling the solution led to the appearance of new UV-vis peaks at 550 and 600 nm, which were considered to originate from self-assembled polymer molecules. Powder XRD (X-ray diffraction) data supported a well-stacked solid structure of the polymers and a highly ordered structure of a polymer film formed on a quartz glass substrate. These data revealed a strong tendency of the new polymers to self-assemble and to form an aligned structure on the surface of the substrates.     

The effect of lead on intracellular water content of human red blood cells. Part 1. An experiment in vitro (author's transl)

We observed in vitro experiment that lead increased osmotic resistance of normal human erythrocytes and decreased mean corpuscular volume and intracellular potassium. Though the mechanism of the increased osmotic resistance of erythrocytes caused by lead has not yet been completely clarified, the following hypothesis could be accepted. Lead causes leakage of water from erythrocytes, which means that more water can enter the cell before hemolysis occurs. But there has been no report of direct measurement of the intracellular water content of erythrocytes treated with lead. This paper tried to clarify the relationship between intracellular water and osmotic resistance of lead treated erythrocytes in vitro experiment. The results were: 0.05 mumol/ml of lead increases osmotic resistance, trapped water content and plasma water content of normal human blood and decreases intracellular water content after incubation for 2 hours at 37 degrees C.     

X gene and precore region mutations in the hepatitis B virus genome in persons positive for antibody to hepatitis B e antigen: comparison between asymptomatic "healthy" carriers and patients with severe chronic active hepatitis

Hepatitis B virus (HBV) carriers with antibody to hepatitis e antigen comprise asymptomatic carriers (ASCs), who have low replication levels of HBV, and patients with chronic active hepatitis (CAH), who have high levels of viral replication. To investigate whether defects in the X protein might be responsible for this difference in the level of viral replication, nucleotide sequences of X and precore gene regions in serum HBV were analyzed in 19 ASCs and 9 CAH patients. All patients had a point mutation creating a stop codon in the precore region. Seventeen ASCs (87.3%) had identical mutations consisting of 4 noncontiguous 1-bp deletions or an 8-bp deletion, both of which truncate the normal X protein, whereas no CAH patient had an X gene mutation (P < .001). Thus, deletion of the X protein might be responsible for the low levels of viral replication in ASCs.     

Ectopic accumulation of 99mTc-HMDP in primary lung cancer in comparison with CT findings

Hypertension attributable to pheochromocytoma is a very attractive model for the elucidation of the pathogenesis of hypertension. Sixteen different point mutations in the RET proto-oncogene and 30 mutations in the Von Hippel-Lindau (VHL) tumor suppressor gene have been identified so far associated with expression of pheochromocytoma. Each of these mutations initiates either the syndrome of multiple endocrine neoplasia type 2 (MEN 2) (MEN 2A and MEN 2B) or the VHL disease. Certain mutations in both genes are associated with the presence of pheochromocytoma. In general, these pheochromocytomas produce catecholamines that result in hypertension. Therefore, analysis for germline mutations in these genes are of practical value, because susceptibility to these diseases can be predicted in as yet clinically unaffected relatives.     

Microstructures and Thermal Properties of Cold-Sprayed Cu-Cr Composite Coatings

Copper-based composites for thermal conductive components were prepared via the cold spray process, and the deposition efficiency and adhesion morphology of feedstock powders on Cu substrate were evaluated. Cu-based composites were fabricated using Cu-Cr mixed powders with their mixture ratio of 20, 35, 50, and 65 mass% Cr onto oxygen-free copper substrate with N₂ carrier gas. Cu-Cr composite coatings were investigated for their Cr content ratio, microstructures, and thermal conductivity. The Cr content ratio in the coating was approximately 50-60% of feedstock mixture ratio due to the low formability of the hard particles. Transmission electron microscopy characterizations revealed that an oxygen-rich layer exists at the Cr particle/Cu substrate interface, which contributes to the deposition of the Cr particles. After the heat treatment at 1093 K, the coatings showed denser cross-sectional structures than those before the heat treatment, and the thermal conductivity was improved as a result of the recrystallization of Cu matrix.