Electrical and Thermal Conductivities of Nickel-Zirconia Cermets

The microstructure, electrical resistivity, and thermal diffusivity of nickel-zirconia cermets have been studied. Scanning electron microscopy of the fracture surfaces of samples shows that there are some small isolated nickel granules adhering to the surface of the zirconia particles. Considering such a microstructural feature of samples and the law of mixtures, an improved model for electrical and thermal conductivity is established. With this model, the experimental results-that electrical conductivity and thermal diffusivity increase with increasing nickel content-are interpreted. Moreover, the thermal diffusivity is observed to be almost linearly related to temperature.     

Cofilin Signaling in the CNS Physiology and Neurodegeneration

All eukaryotic cells are composed of the cytoskeleton, which plays crucial roles in coordinating diverse cellular functions such as cell division, morphology, migration, macromolecular stabilization, and protein trafficking. The cytoskeleton consists of microtubules, intermediate filaments, and actin filaments. Cofilin, an actin-depolymerizing protein, is indispensable for regulating actin dynamics in the central nervous system (CNS) development and function. Cofilin activities are spatiotemporally orchestrated by numerous extra- and intra-cellular factors. Phosphorylation at Ser-3 by kinases attenuate cofilin’s actin-binding activity. In contrast, dephosphorylation at Ser-3 enhances cofilin-induced actin depolymerization. Cofilin functions are also modulated by various binding partners or reactive oxygen species. Although the mechanism of cofilin-mediated actin dynamics has been known for decades, recent research works are unveiling the profound impacts of cofilin dysregulation in neurodegenerative pathophysiology. For instance, oxidative stress-induced increase in cofilin dephosphorylation is linked to the accumulation of tau tangles and amyloid-beta plaques in Alzheimer’s disease. In Parkinson’s disease, cofilin activation by silencing its upstream kinases increases α-synuclein-fibril entry into the cell. This review describes the molecular mechanism of cofilin-mediated actin dynamics and provides an overview of cofilin’s importance in CNS physiology and pathophysiology.     

Quantitative analysis of deuterium in zircaloy using double-pulse laser-induced breakdown spectrometry (LIBS) and helium gas plasma without a sample chamber

A crucial safety measure to be strictly observed in the operation of heavy-water nuclear power plants is the mandatory regular inspection of the concentration of deuterium penetrated into the zircaloy fuel vessels. The existing standard method requires a tedious, destructive, and costly sample preparation process involving the removal of the remaining fuel in the vessel and melting away part of the zircaloy pipe. An alternative method of orthogonal dual-pulse laser-induced breakdown spectrometry (LIBS) is proposed by employing flowing atmospheric helium gas without the use of a sample chamber. The special setup of ps and ns laser systems, operated for the separate ablation of the sample target and the generation of helium gas plasma, respectively, with properly controlled relative timing, has succeeded in producing the desired sharp D I 656.10 nm emission line with effective suppression of the interfering H I 656.28 nm emission by operating the ps ablation laser at very low output energy of 26 mJ and 1 μs ahead of the helium plasma generation. Under this optimal experimental condition, a linear calibration line is attained with practically zero intercept and a 20 μg/g detection limit for D analysis of zircaloy sample while creating a crater only 10 μm in diameter. Therefore, this method promises its potential application for the practical, in situ, and virtually nondestructive quantitative microarea analysis of D, thereby supporting the more-efficient operation and maintenance of heavy-water nuclear power plants. Furthermore, it will also meet the anticipated needs of future nuclear fusion power plants, as well as other important fields of application in the foreseeable future.     

Study of Substrate Preheating on Flattening Behavior of Thermal-Sprayed Copper Particles

In this study, the effect of substrate preheating on flattening behavior of thermal-sprayed particles was systematically investigated. A part of mirror-polished AISI304 substrates were preheated to 573 and 773 K for 10 min, and then exposed to an air atmosphere for different durations of up to 48 h, respectively. Contact angle of water droplet was measured on the substrate under designated conditions. It was found that the contact angle increased gradually with the increase of substrate duration after preheating. Moreover, smaller contact angle was maintained on the substrate with higher preheating temperature. Commercially available Cu powders were thermally sprayed onto the substrates with the same thermal treatment history as contact angle measurement using atmospheric plasma-spray technique. The splat shape had a transitional changing tendency from a splash splat to a disk one on the substrate with a short duration after preheating, while reappearance of splash splat with the increase of duration was confirmed. In general, wetting of substrate surface by molten particles may dominate the flattening behavior of thermal-sprayed particles. The occurrence of desorption of adsorbed gas/condensation caused by substrate preheating likely provides good wetting. On the other hand, the poor wetting may be attributed to the re-adsorption of gas/condensation on the substrate surface with the increase of duration. In addition, the shear adhesion strength of coating fabricated on blasted AISI304 substrate was enhanced on the once-heated substrate, but weakened with the increase of duration. The changing tendency of the coating adhesion strength and the wetting of substrate by droplet corresponded quite well with each other.     

Microstructures and Thermal Properties of Cold-Sprayed Cu-Cr Composite Coatings

Copper-based composites for thermal conductive components were prepared via the cold spray process, and the deposition efficiency and adhesion morphology of feedstock powders on Cu substrate were evaluated. Cu-based composites were fabricated using Cu-Cr mixed powders with their mixture ratio of 20, 35, 50, and 65 mass% Cr onto oxygen-free copper substrate with N₂ carrier gas. Cu-Cr composite coatings were investigated for their Cr content ratio, microstructures, and thermal conductivity. The Cr content ratio in the coating was approximately 50-60% of feedstock mixture ratio due to the low formability of the hard particles. Transmission electron microscopy characterizations revealed that an oxygen-rich layer exists at the Cr particle/Cu substrate interface, which contributes to the deposition of the Cr particles. After the heat treatment at 1093 K, the coatings showed denser cross-sectional structures than those before the heat treatment, and the thermal conductivity was improved as a result of the recrystallization of Cu matrix.     

The effect of the hydrothermal treatment with aqueous NaOH solution on the photocatalytic and photoelectrochemical properties of visible light-responsive TiO2 thin films

The effect of the hydrothermal treatment with aqueous NaOH solution on the photoelectrochemical and photocatalytic properties of visible light-responsive TiO₂ thin films prepared on Ti foil substrate (Vis-TiO₂/Ti) by a radio-frequency magnetron sputtering (RF-MS) deposition method has been investigated. The hydrothermally treated Vis-TiO₂/Ti electrodes exhibited a significant increase in their photocurrent under UV and visible light irradiation as compared to untreated Vis-TiO₂/Ti electrode. SEM investigations revealed that the surface morphology of Vis-TiO₂/Ti are drastically changed from the assembly of the TiO₂ crystallites to the stacking of nanowires with diameters of 30–50 nm with increasing hydrothermal treatment time (3–24 h), accompanying the increase in their surface area. The separate evolution of H₂ and O₂ from water under solar light irradiation was successfully achieved using the Vis-TiO₂/Ti/Pt which is hydrothermally treated for 5 h, while the H₂ evolution ratio was 15 μmol h⁻¹ in the early initial stage, corresponding to a solar energy conversion efficiency of 0.23%.     

Study of hydrogen and deuterium emission characteristics in laser-induced low-pressure helium plasma for the suppression of surface water contamination

An experimental study was conducted in search of the experimental condition required for the much needed suppression of spectral interference caused by surface water in hydrogen analysis using laser-induced low-pressure helium plasma spectroscopy. The problem arising from the difficulty in distinguishing hydrogen emission from hydrogen impurity inside the sample and that coming from the water molecules was overcome by taking advantage of similar emission characteristics shared by hydrogen and deuterium demonstrated in this experiment by the distinct time-dependent and pressure-dependent variations of the D and H emission intensities from the D-doped zircaloy-4 samples. This similarity allows the study of H impurity emission in terms of D emission from the D-doped samples and thereby separating it from the H emission originating from the water molecules. Employing this strategy has allowed us to achieve the large suppression of water induced spectral interference from the previous minimum of 400 microg/g to the current value of 30 microg/g when a laser beam of 34 mJ under tight focusing condition was employed. Along with this favorable result, this experimental condition has also provided a much better (about 6-fold higher) spatial resolution, although these results were achieved at the expense of reducing the linear calibration range from the previous 4 300 microg/g to the present 200 microg/g.     

The Effects of Touch Button Size on Touchscreen Operability

The present study investigated the effects of touch button size on touchscreen operability and compared these effects between young adult and elderly participants. A total of 21 young adults （aged 22.3 ± 1.5 years） and 20 elderly adults （aged 68.1 ±4.9 years） were recruited and asked to press square number buttons （from 0 to 9） on an experimental touchscreen with their right index finger. The buttons＇ size changed during the experiment with six conditions （6, 8, 10, 12, 14 and 16 mm）. It was found that a decrease of the button size to l0 mm or below tended to increase the operation time and error rate, whereas it decreased the subjective overall operability of the touchscreen. Such effects were greater in the elderly adults than in the young adults. In addition, the reaction positions on the buttons were found to be close to the right side of them, which led the fingertip to approach the right outline of the buttons. These findings suggest that the use of small touch buttons should be minimised on touchscreens, especially for elderly users.     

Researchers’ risk-smoothing publication strategies: Is productivity the enemy of impact?

Scientometrics - In the quest for balance between research productivity and impact, researchers in science and engineering are often encouraged to adopt a play-it-safe research and publication...