Measurement method using coupled transmission lines for voltage transients on the distribution line

It is well known that voltage transients are caused by the operation of switchgears in a power system. The voltage transients travel along the power line as a traveling wave, and cause malfunction of electrical devices, communication systems, and the operational error of a control system. The voltage transients at the making operation of switchgear were examined to obtain the fundamental data for considering the immunity of communication systems used on a power system. However, it was difficult to observe the voltage transients using the potential transformer and the capacitance potential device because the transients were very rapid. Therefore, a measurement method using the coupled transmission line system is proposed to measure the high-speed and high-voltage transients, and the actual experimental results on the 6.9-kV power system are presented. This method enables the measurement of high-speed voltage transients in out of contact with the power system.     

Cloning and heterologous expression of a beta-fructofuranosidase gene from Arthrobacter globiformis IFO 3062, and site-directed mutagenesis of the essential aspartic acid and glutamic acid of the active site

We have cloned the gene encoding a beta-fructofuranosidase from Arthrobacter globiformis IFO 3062, and subsequently, the gene was heterologously expressed in Escherichia coli. This beta-fructofuranosidase gene encodes a protein of 548 amino acid residues with a calculated molecular mass of 60,519 Da. We have examined the roles of three residues of A. globiformis IFO 3062 beta-fructofuranosidase by site-directed mutagenesis, and found that aspartic acid 130 and glutamic acid 392, which are two of the apparent catalytic residues, are essential for hydrolase activity. This study provides the first experimental evidence showing that these two amino acid residues of beta-fructofuranosidase play a critical role in hydrolyzing sucrose.     

Measured resonance characteristics of a 2-ghz-fundamental quartz resonator

I fabricated an inverted-mesa AT-cut quartz resonator in which the thickness of the vibrating area was adjusted to 0.6 /spl mu/m by wet etching, and I demonstrated the excitation of a fundamental thickness vibration of 2.074 GHz. This main mode was inductive, and Q was 1037. However, all inharmonic modes were capacitive.     

Quantitative source identification of dioxin-like PCBs in Yokohama, Japan, by temperature dependence of their atmospheric concentrations

The source and environmental behavior of dioxin-like polychlorinated biphenyls (PCBs) together with other PCBs and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) were evaluated based on analysis of variations in their atmospheric concentrations in Yokohama, Japan. Potential factors responsible for variations in the atmospheric concentrations of the congeners were investigated by principal component analysis and multiple regression analysis of the data. Two major variations were seen: one had strong temperature dependence, while the other had no significant temperature dependence. A possible explanation for this difference is that the former is related to congeners released by volatilization (e.g., volatilization from commercial PCB products and past polluted environments), while the latter is related to congeners emitted from thermal processes. The relative contributions of dioxin-like PCBs released by volatilization and those emitted from thermal processes were estimated based on the temperature dependence of the atmospheric concentrations. The results suggest that both dioxin-like PCBs emitted from thermal processes and those released by volatilization are significant sources of air pollution in this area in terms of the toxic equivalent (TEQ) for dioxin-like PCBs. We demonstrated that the present approach based on variations in atmospheric concentrations can be useful in providing a qualitative as well as quantitative understanding of source information.     

Adsorption of aromatic amines and o-substituted derivatives of phenol from organic solutions by activated carbons-effect of surface acidity

In order to study the effect of surface acidity of activated carbons on their adsorption characteristics, three kinds of aromatic amines and four kinds of o-substituted phenols were adsorbed from organic solutions by twelve kinds of activated carbons of different acidity and of known pore-structure. It was demonstrated that the surface acidity had a marked effect on the adsorption characteristics and that the effect was linked with the polarity of the solvents.     

Ingestion of plasmalogen markedly increased plasmalogen levels of blood plasma in rats

Plasmalogens, a subclass of phospholipids, are widely distributed in human and animals, and are taken into the body as food. However, no data exist on the intestinal absorption or fate of ingested plasmalogen. Here, we determined whether dietary plasmalogen is absorbed and whether blood and tissue concentrations increased in normal male Wistar rats by using four separate experiments. Phospholipids containing more than 20 wt% of plasmalogen extracted from the bovine brain were incorporated into test diets (10–15 wt%). In experiment 1, we estimated the absorption rate by measuring the plasmalogen vinyl ether bonds remaining in the alimentary tract of rats after the ingestion of 2 g of test diet containing 91 μmol plasmalogen. The absorption rate of plasmalogen was nearly 80 mol% after 4 h, comparable to the total phospholipid content in the test diet. In experiment 2, we observed no degradation of the plasmalogen vinyl ether bonds under in vitro conditions simulating those of the stomach and small intestinal lumen. In experiment 3 we confirmed a comparable absorption (36 mol%) by using a closed loop of the upper small intestine in anesthetized rats 90 min after injecting a 10 wt% brain phospholipid emulsion. Feeding a test diet containing 10 wt% brain phospholipids for 7 d increased plasmalogen concentration threefold in blood plasma and by 25% in the liver; however, no increases were seen in blood cells, skeletal muscle, brain, lungs, kidneys, or adipose tissue (experiment 4). We concluded that dietary plasmalogen is absorbed from the intestine and contributes to a large increase in plasmalogen levels in blood plasma.     

The distribution of osteocalcin, degree of mineralization, and mechanical properties along the length of Cyprinus carpio rib bone

This study examined the spatial distribution of selected biochemical and mechanical properties along the length of carp rib bone. Carp rib bone was chosen because of its unusually high osteocalcin content relative to other extractable proteins. The amount of osteocalcin was significantly lower (p<0.01) at the most distal section, relative to all other sections. The amount of phosphate (p<0.05) and the elastic modulus in the longitudinal plane (p<0.0001) were found to be significantly higher in the most distal section, relative to the most proximal section. There was no significant difference in the calcium distribution, molar Ca/P ratio, or elastic modulus in the transverse plane. It was speculated that the distal section contains less mature bone. The methods illustrate the potential usefulness of nanoindentation to characterize the mechanical properties of bone, relative to its biochemical composition. © 2001 Kluwer Academic Publishers     

中国液态锂铅包层材料研究进展

液态锂铅包层是国际上普遍关注和最有发展潜力的聚变堆包层概念设计之一,而包层材料是液态锂铅包层的核心问题之一.目前,液态锂铅包层普遍选用低活化铁素体/马氏体钢(RAFM钢)作为结构材料,液态锂铅作为中子倍增剂及氚增殖剂.另外,部分设计采用了耐高温、电绝缘流道插件作为功能材料,以降低磁流体动力学效应及提高冷却剂出口温度(高于700℃).为适应液态包层的发展需求,中国科学院等离子体物理研究所FDS团队联合国内外相关研究单位,进行了具有中国自主知识产权的中国低活化马氏体钢(CLAM钢)及液态锂铅包层功能材料研发,并开展了锂铅热对流及强迫对流回路的设计、研制及腐蚀实验研究,以研究液态金属锂铅的流动特性及其与结构和功能材料的相容性.同时建立了聚变堆材料数据库平台,为促进中国聚变堆液态包层及材料技术的研究和发展提供数据支持.     

Preparation of porous sheet composite impregnated with TiO<Subscript>2</Subscript> photocatalyst by a papermaking technique

Titanium dioxide (TiO₂) powder-containing sheet composites, called TiO₂ sheet, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO₂ powders were homogeneously scattered over the fiber-mix networks tailored within the catalyst sheet. Under UV irradiation, the TiO₂ paper could decompose p-hydroxyacetophenone (p-HAP), although the degradation efficiency by the TiO₂ sheet was lower than that by the TiO₂ powder. Scanning electron microscopy revealed that coverage of the TiO₂ particles inside the sheet by alumina binder which was used to improve the sheet strength caused the deterioration of the photocatalytic performance. Internal addition of alumina binder made the TiO₂ sheet porous and such a TiO₂ sheet exhibited high photocatalytic performance equivalent to that of TiO₂ powder. The porous structure of TiO₂ sheet might contribute to effective transport of p-HAP to the surface of TiO₂ particles inside the sheet, resulting in high degradation performance. In addition, TiO₂ sheet prepared using TiO₂ sol showed higher photocatalytic efficiency than TiO₂ powder and it was indicated that the porous sheet structure might provide suitable conditions for TiO₂ catalysis for photodecomposition.     

Synthesis of the Bi-2222 Compounds of Bi–Sr–Ln(Zr)–Cu–O (Ln = Sm,Eu, Gd,and Dy)

Bi-based superconducting compounds with the 2222 structure has been already synthesized in the Bi₂Sr₂- (Ln_1−x Ce _x )₂Cu₂O_10+y (Ln = Sm, Eu, and Gd) systems. One of the characteristics of these compounds is the existence of the fluorite-like (Ln_1−x Ce _x )₂O₂ block between two CuO₅ pyramids in the crystal structure. The tetravalent ions of Ce⁴⁺ are reported to be necessary to stabilize the 2222 structure. Recently, we have discovered that the Bi-2222 phase could be composed in the Bi₂Sr₂(Ln_2−x Zr _x )Cu₂O _z (Ln = Sm, Eu, Gd, and Dy) systems, where Zr⁴⁺ is used as a new tetravalent ion stabilizing the 2222 structure in stead of Ce⁴⁺. In the new system, nearly single 2222 phase samples have been obtained at the nominal composition of x=0.5 (Ln = Sm, Eu, and Gd) and in the range of 0.1≤x≤0.3 (Ln = Dy). Among them, the sample with Ln = Gd has the smallest resistivity at 273 K. But it is a semiconductor, and the conduction process at low temperatures is assumed to be followed by a two-dimensional VRH. The experimental results for the Gd samples with a partial substitution of Pb for Bi in the Bi₂Sr₂(Gd_2−x Zr _x )Cu₂O _z system are also reported.