Nanotrap and mass analysis of aromatic molecules by phenyl group-modified nanoparticle

To functionalize the surface of nanoparticles with phenyl groups for subsequent cross-linking with aromatic molecules by mutual interactions, we prepared functional nanoparticles (d = 3 nm) by silanization with phenyl-triethoxysilane. The nanoparticles had Fe(2)O(3) cores conjugated to phenyl groups; this was confirmed by Fourier transform infrared (FT-IR) spectroscopy and absorption spectrophotometry. The typical C-H and C-C peaks and the absorption at 240 nm, which corresponds to aromatic rings, were detected in the spectroscopic results for the phenyl group-modified nanoparticles. The nanoparticles could ionize aromatic (colchicine, reserpine, and bradykinin peptide) and nonaromatic (L-α-phosphatidylethanolamine,dioleoyl, and polyethylene glycol) molecules by nanoparticle-assisted laser desorption/ionization mass spectrometry. The nanoparticles worked as a selective trap and an ionization-assisting reagent in mass spectrometry for the aromatic molecular targets.     

Increased Synovial CD14 mRNA Expression and Proportion of CD14high Subsets in Early-Stage Hip Osteoarthritis: Propensity Matched Score Analysis

The pathophysiology of early-stage hip osteoarthritis (EOA) is not fully understood. Although a previous study in an age-unmatched cohort reported that the number of macrophages was increased in knee EOA compared to late OA (LOA), it remained unclear whether increased macrophages in EOA accurately reflect EOA pathology. We investigated the differences in CD14 expression levels between EOA and LOA using age-unmatched and -matched cohorts. Synovial tissues were obtained from 34 EOA (Tönnis grades 0 and 1) and 80 LOA (Tönnis grades 2 and 3) patients. To correct for differences in demographics between patients with LOA and EOA, we also created propensity score-matched cohorts (16 EOA and 16 LOA). CD14 expression and its association with pain was estimated in LOA and EOA before and after propensity matching. We performed flow cytometry on tissues from the 16 patients, with 8 from each group, to assess for CD14+ subsets in the cells. The CD14 expression in EOA was higher than that in LOA both before and after propensity matching. The proportion of CD14^high subsets in EOA was higher than that in LOA. The CD14 expression was associated with pain in EOA before matching. However, no difference was observed between the pain and CD14 expression after matching in EOA. The increased CD14 expression and the proportion of CD14^high subsets may be important features associated with hip EOA pathology. To accurately compare early and late OA, the analysis of a propensity score-matched cohort is necessary.     

Lysophosphatidylinositol Induced Morphological Changes and Stress Fiber Formation through the GPR55-RhoA-ROCK Pathway

We previously reported that lysophosphatidylinositol (LPI) functions as an endogenous agonist of GPR55, a novel cannabinoid receptor. However, the physiological roles of LPI-GPR55 have not yet been elucidated in detail. In the present study, we found that LPI induced morphological changes in GPR55-expressing HEK293 cells. LPI induced the cell rounding of GPR55-expressing HEK293 cells but not of empty-vector-transfected cells. LPI also induced the activation of small GTP-binding protein RhoA and increased stress fiber formation in GPR55-expressing HEK293 cells. The inhibition of RhoA and Rho kinase ROCK by the C3 exoenzyme and the ROCK inhibitor reduced LPI-induced cell rounding and stress fiber formation. These results clearly indicated that the LPI-induced morphological changes and the assembly of the cytoskeletons were mediated through the GPR55-RhoA-ROCK pathway.     

Addition of Synthetic Biomaterials to Deproteinized Bovine Bone Mineral (DBBM) for Bone Augmentation—A Preclinical In Vivo Study

(1) Aim: To investigate the effect of synthetic bone substitutes, α-tricalcium phosphate (α-TCP) or bi-layered biphasic calcium-phosphate (BBCP) combined with deproteinized bovine bone mineral (DBBM), on bone formation. (2) Methods: Thirty critical size defects were randomly treated with the following five different treatment modalities: (1) negative control (NC, empty), (2) DBBM, (3) α-TCP + DBBM (1:1), (4) BBCP 3%HA/97%α-TCP + DBBM (1:1), and (5) BBCP 6%HA/94%α-TCP + DBBM (1:1). The samples, at four weeks post-surgery, were investigated by micro-CT and histological analysis. (3) Results: A similar level of new bone formation was demonstrated in the DBBM with α-TCP bone substitute groups when compared to the negative control by histomorphometry. DBBM alone showed significantly lower new bone area than the negative control (p = 0.0252). In contrast to DBBM, the micro-CT analysis revealed resorption of the α-TCP + DBBM, BBCP 3%HA/97%α-TCP + DBBM and BBCP 6%HA/94%α-TCP + DBBM, as evidenced by a decrease of material density (p = 0.0083, p = 0.0050 and p = 0.0191, respectively), without changing their volume. (4) Conclusions: New bone formation was evident in all defects augmented with biomaterials, proving the osteoconductive properties of the tested material combinations. There was little impact of the HA coating degree on α-TCP in bone augmentation potential and material resorption for four weeks when mixed with DBBM.     

The Detection of Immunity against WT1 and SMAD4P130L of EpCAM+ Cancer Cells in Malignant Pleural Effusion

Malignant pleural effusion (MPE) provides a liquid tumor microenvironment model that includes cancer cells and immune cells. However, the characteristics of tumor antigen-specific CD8⁺ T cells have not been investigated in detail. Here, we analyzed MPE samples taken from a patient with pancreatic cancer who received a dendritic cell vaccine targeting Wilms’ Tumor 1 (WT1) antigen over the disease course (two points at MPE^1st and 2^nd, two months after MPE1^st). Epithelial cell adhesion molecule (EpCAM)⁺ cancer cells (PD-L1⁻ or T cell immunoglobulin mucin-3, TIM-3⁻), both PD-1 or TIM-3 positive CD8⁺ T cells, and CD14⁺CD68⁺CD163⁺TIM-3⁺ macrophages increased from the MPE^1st to MPE^2nd. The ratio of WT1-specific cytotoxic lymphocytes (WT1-CTLs) to MPE CD8⁺ T cells and IFN-γ secretion of WT1-CTLs were reduced with disease progression. Coincidentally, the fraction of central memory T (T_CM) of WT1-CTLs was decreased. On the other hand, CD8⁺ T cells in response to SMAD4^P130L, which is homogeneously expressed in EpCAM⁺ cancer cells, were detected using in vitro expansion with the HLA-A*11:01 restrictive SVCVNLYH neoantigen. Furthermore, the CD8⁺ T cell response to SMAD4^P130L was diminished following remarkably decreased numbers of CD8⁺ T_CM in MPE samples. In conclusion, CD8⁺ T cells responding to WT1 or SMAD4^P130L neoantigen expressed in EpCAM⁺ pancreatic cancer cells were detected in MPE. A tumor antigen-specific immune response would provide novel insight into the MPE microenvironment.     

Computation of mutual entropy in quantum markov chains

There are several damping phenomena in quantum optics. Such phenomena have been usually explained by open systems. In statistical physics, open system dynamics have been used to study the irreversibility and the approach to equilibrium. In this paper, the dynamical change of the mutual entropy for an open system, frequently studied in the quantum optics literature, is rigorously computed through a model of quantum Markov chain. In particular, the concrete formula of Stinespring expression for such a model is obtained and applied to the derivation of the mutual entropy, and some computational results are presented.     

Preparation of nanocomposites by melt compounding polylactic acid/polyamide 12/organoclay at different screw rotating speeds using a twin screw extruder

This study analyzes the effect of different screw rotating speeds on the clay dispersion and mechanical properties of nanocomposites prepared by melt compounding polylactic acid (PLA) with an organoclay in a co‐rotating twin screw extruder. Polyamide 12 (PA12) was used as an additive. Two different screw rotating speeds, 65 rpm and 150 rpm, were used in this study. According to the tensile strength data, the Young's modulus of the PLA/clay nanocomposites showed improvement at a screw rotating speed of 150 rpm. The Young's modulus improved with the addition of the organoclay to PLA matrix, but decreased when PA12 was added to the PLA matrix. The tensile strengths and elongations become small by adding organoclay to PLA matrix. The tensile strengths of the PLA/organoclay nanocomposites increased for the higher screw rotating speed (150 rpm). The d‐spacing of PLA/PA12/Clay nanocomposites was independent of the addition of PA12. The size of the clay aggregates in the PLA/PA12/Clay nanocomposites is smaller than that of PLA/Clay. Furthermore, the thermal stability of the PLA/Clay nanocomposite increases with addition of PA12, while on the whole, it had little influence on the tensile properties. POLYM. COMPOS., 29:1–8, 2008. © 2007 Society of Plastics Engineers     

Pervaporation via silicon-based membranes: Correlation and prediction of performance in pervaporation and gas permeation

Pervaporation (PV) is a membrane technology that holds great promise for industrial applications. To better understand the PV mechanism, PV dehydrations of various types of organic solvents (methanol, ethanol, iso-propanol, tert-butanol, and acetone) were performed on five types of organosilica and two types of silicon carbide-based membranes, all with different pore sizes. Water permeance was dependent on the types of organic aqueous solutions, which suggested that organic solvents penetrated the pores and hindered the permeation of water. In addition, water permeance of various types of membranes in PV was well correlated with hydrogen permeance in single-gas permeation. Furthermore, a clear correlation was obtained between the permeance ratio in PV and that in single-gas permeation, which was confirmed via the modified-gas translation model. These correlations make it possible to use single-gas permeation properties to predict PV performance.     

Device modeling and simulations toward sub-10 nm semiconductordevices

This paper overviews the fundamental problems encountered in device modeling and simulations of sub-10 nm Si metal-oxide-semiconductor field-effect-transistors (MOSFETs). We focus on the two fundamental problems: the quantum effects and the effects associated with the long-range Coulomb potential. It is pointed out that these problems are profoundly related to the basic principles of device physics and even pose a question on the validity of the basic transport equation which the present device simulations are based on. We also review various approaches and methods taken to tackle those problems     

100 Å-thick tunnel junction by double impurity doping liquid phase epitaxy for V-band TUNNETT oscillation

The tunnel injection transit time (TUNNETT) diodes with p⁺p⁺n⁺n⁻n⁺ structure were fabricated by liquid phase epitaxy (LPE). About 100 Å tunnel junction (p⁺n⁺) was successfully prepared by the double impurity diffusion of Ge and S during LPE growth. Continuous wave (CW) oscillation was realized at 51.520 GHz in the V-band cavity with the phase noise of −60 dBc/Hz at 1 kHz bandwidth.