Application-aware buffer management: new metrics and techniques

An important issue for video transmission over IP networks is preservation of perceived video quality despite packet loss. Packet loss can be detrimental to compressed video. However, reducing packet loss to a very low level is difficult with current loss control techniques. Furthermore, even a very low objective loss probability can still seriously distort perceived video quality. This paper presents two buffer management schemes using video characteristics. They increase maximum loss tolerance for a desired level of video quality, providing better quality at equal loss ratios, when compared to a conventional buffer management scheme. Meanwhile, service fairness and network efficiency are also improved.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

Free volume and permeabilities of O2 and H2 in Nafion membranes for polymer electrolyte fuel cells

The mechanism of gas permeation in Nafion membranes for polymer electrolyte fuel cells has been investigated from the viewpoint of free volume. Three different samples, a membrane with ionic exchange capacity (IEC) = 0.92 meq/g, and recast samples with IEC = 0.92 and 1.00 meq/g were used after drying. Free volume was quantified using the positron annihilation lifetime (PAL) technique and gas permeabilities were measured for O₂ and H₂ as functions of temperature and relative humidity. Good linear correlations between the logarithm of the permeabilities at different temperatures and reciprocal free volume indicate that gas permeation in dry Nafion is governed by the free volume. Nevertheless permeabilities are much smaller than the corresponding flexible chain polymer with a similar free volume size due to stiff chains of the perfluoroethylene backbone. In highly hydrated Nafion above 60% relative humidity, where the O₂ permeability varies oppositely to the free volume, gas permeation proved to be controlled by the gradual increase in overall flexibility of the Nafion–water system.     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and applications of fluoroalkyl end-capped cooligomers having fullerene and mixed fullerenes in the main chain

Fluoroalkanoyl peroxides reacted with FULLERENES [fullerene (C₆₀) and commercially available fullerenes (Nanom Mix^TR and Nanom Black^TR)] and radical polymerizable comonomers such as acrylic acid, N,N-dimethylacrylamide, N-(1,1-dimethyl-3-oxobutyl)acrylamide, and acryloylmorpholine to afford fluoroalkyl end-capped cooligomers having FULLERENES in the main chain under very mild conditions. Fluoroalkyl end-capped Nanom Mix and Nanom Black cooligomers thus obtained were found to exhibit a similar solubility to that of the corresponding fluoroalkyl end-capped cooligomers having fullerene in the main chain. These fluorinated FULLERENES cooligomers were found to form the nanometer size-controlled self-assembled cooligomeric aggregates in aqueous solutions. These fluoroalkyl end-capped FULLERENES cooligomers were more effective for solubilizing fullerene, Nanom Mix and Nanom Black into water, compared to those of the corresponding fluoroalkyl end-capped homooligomers having no FULLERENES in the main chain. Fluoroalkyl end-capped fullerene- and Nanom Mix-acrylic acid cooligomers were found to exhibit fluorescence spectra related to fullerene and Nanom Mix in cooligomers, respectively, in aqueous solutions. Additionally, these fluorinated fullerene- and Nanom Mix-acrylic acid cooligomers were able to increase chemiluminescence intensity related to luminol, effectively, compared to the corresponding fluorinated acrylic acid homooligomers.     

Use of external conduit impairs liver function in patients with biliary atresia

An external conduit (stoma) for patients with biliary atresia has been used to prevent postoperative cholangitis. Thirty-two patients with biliary atresia who had hepatic portoenterostomies with external conduits were studied retrospectively with respect to frequency and severity of postoperative cholangitis or stoma bleeding. Changes in their liver enzyme levels, and total bilirubin (TB) levels were measured before and after closure of the stoma. Cholangitis was observed in 20 patients (62.5%), and major hemorrhage from the stoma site was seen in 14 patients (43.8%) prior to closure. Levels of liver enzymes such as glutamic oxaloacetic transaminase (SGOT), glutamic pyruvic transaminase (SGPT), gamma-glutamyl transpeptidase (gamma-GTP), and alkaline phosphatase (ALP) improved significantly within 1 month after closure of the stoma, and remained low thereafter. The TB concentration was the only liver function that did not change significantly following closure. In summary, the authors do not recommend an external conduit in patients with biliary atresia because it is not an effective way of reducing the incidence of postoperative cholangitis, and it may be deleterious to liver function.     

Patients with ultrasonic coarse-nodular cirrhosis who are anti-hepatitis C virus-positive are at high risk for hepatocellular carcinoma

BACKGROUND: The relationship between echosonographic patterns of patients with cirrhosis who are antihepatitis C virus (HCV)-positive, the DNA synthesis of hepatocytes, and the risk for HCC were studied. METHODS: Thirty-eight patients with anti-C-100 antibody-positive and Child's grade A posthepatitic cirrhosis were studied. DNA synthesis activity was measured by a bromodeoxyuridine (BrdU, a thymidine analogue)-labeling index (LI), using the BrdU-anti-BrdU in vitro method, and the patients were followed prospectively by frequent liver ultrasonography for 3 years. The ultrasound patterns were classified into fine, coarse, and coarse-nodular (CN) patterns, and the reproducibility of the classification in practical use also was confirmed. RESULTS: Of the 21 patients with high DNA synthesizing cirrhosis (BrdU LI > or = 1.5%), 10 (48%) showed coarse-nodular, 5 (24%) coarse, and 6 (29%) fine pattern in ultrasonography. Conversely, of the 17 patients with low DNA synthesizing LC (BrdU LI < 1.5%), only 1 (6%) showed coarse-nodular, 2 (12%) coarse, and 14 (82%) fine pattern. A significant relationship was found between the two groups of BrdU LI and ultrasound imaging patterns (P < 0.05). The incidence of CN pattern was significantly higher (P < 0.01) in the high DNA synthesizing group than in low DNA synthesizing group. Of the 11 patients with CN pattern by ultrasound imaging, 10 (91%) were in the high DNA synthesizing group, and 9 (82%) developed HCC during the follow-up period, compared with 3 of 7 (43%) with coarse, and only one of 20 (5%) with fine pattern developed HCC. The incidence of HCC was significantly higher (P < 0.01) in patients with a CN cirrhosis pattern than in those with a fine pattern. CONCLUSIONS: In patients with cirrhosis who are anti-HCV-positive, the CN pattern by ultrasound imaging indicates increased DNA synthesis of hepatocytes and a high risk for developing HCC.