Synthetic potential of molluscan sulfatases for the library synthesis of regioselectively O-sulfonated D-galacto-sugars

The substrate specificities of three molluscan sulfatases (E.C. 3.1.6.1; snail, abalone, and limpet origins) were investigated with assorted p-nitrophenyl (pNP) di-O-sulfonated beta-D-galactopyranosides and beta-lactosides [3,6-SO(3) Gal (1), 3',6'-SO(3) Lac (2), 4, 6SO(3) Gal (3), 2,6-SO(3) Gal (4), 3,4-SO(3) Gal (5), and 3,6-SO(3) GalNAc (6); Ac, acetyl; Gal, galactose; Lac, lactose] together with mono-O-sulfonated beta-D-galactopyranoside [pNP 3SO(3)-Gal (7)] and tri-O-sulfonated alpha-D-galactopyranoside [2,3,6-SO(3)-alpha-Gal (11)]. Some notable differences between the substrate specificity of the three sulfatases were disclosed; snail sulfatase hydrolyzed the 3O- and 2O-sulfo groups of 1 and 4, respectively, to afford 6SO(3) Gal (9) in high yields, while the abalone enzyme did not act on 4. Only the limpet enzyme could cleave the 3O-sulfo groups of 7 to give pNP beta-galactoside. In contrast, every enzyme could utilize 11 as a good substrate to afford a mixture of 6SO(3)-alpha-Gal (13) and 2,6-SO(3) alpha-Gal (12). None of the enzymes could cleave the O-sulfo groups of 5 and 6, which indicates that a primary 6O-sulfo group tends to promote the enzymatic hydrolysis of O-sulfo groups at the secondary positions.     

Power generation of the touching Cu/Bi-Te/Cu composites under the periodically alternating temperature gradients

The thermo-emf ΔV of the touching p- and n-type Cu/Bi-Te/Cu composites with different thicknesses of t _Bi-Te and t _Cu was measured as a function of time by alternating the temperature difference ΔT at periods of T = 20, 60, 120, 240 and ∞ sec, where t _Bi-Te was varied from 0.1 to 2.0 mm and t _Cu from 0 to 4.0 mm. As a result, ΔV changes significantly with t _Bi-Te, t _Cu and T. The effective thermo-emf ΔV _eff increases significantly with an increase of 1/T and exhibited a local maximum at 1/T = 1/240 s⁻¹. The resultant | α | and the effective temperature difference ΔT _eff were increased significantly by optimizing t _Bi-Te and t _Cu at 1/T = 1/240 s⁻¹. The power generation ΔW _eff (= ΔV _eff²/4R _calc) estimated using the measured ΔV _eff and calculated R _calc also exhibited a local maximum at 1/240 s⁻¹ for an optimum combination of t _Bi-Te = 0.1 mm and t _Cu = 2.0 mm, so that the maxima ΔW _eff at 1/T = 1/240 s⁻¹ for the p- and n-type composites were 2.28 and 2.92 times higher than those obtained at 1/T = 0 s⁻¹. This significant increase in ΔW _eff is owing to both the increase in ΔT _eff and the increase in ZT due to the increase in |α|. The power generation was thus found to be enhanced significantly by imposing the alternating temperature gradients on touching Cu/Bi-Te/Cu composites.     

Dependence of Seebeck coefficient on a load resistance and energy conversion efficiency in a thermoelectric composite

The thermo-emf ΔV and current ΔI generated by imposing the alternating temperature gradients (ATG) at a period of T and the steady temperature gradient (STG) on a thermoelectric (TE) composite were measured as a function of t, where t is the lapsed time and T was varied from 60 to or ∞ s. The STG and ATG were produced by imposing steadily and alternatively a source voltage V in the range from 1.0 to 4.0 V on two Peltier modules sandwiching a composite. ΔT, ΔV, ΔI and V_P oscillate at a period T and their waveforms vary significantly with a change of T, where ΔV and V_P are the voltage drops in a load resistance R_L and in resistance R_P of two modules. The resultant Seebeck coefficient |α| = |ΔV|/ΔT of a composite under the STG was found to be expressed as |α| = |α₀|(1 − R_comp/R_T), where R_T is the total resistance of a circuit for measuring the output signals and R_comp is the resistance of a composite. The effective generating power ΔW_eff has a local maximum at T = 960 s for the p-type composite and at T = 480 s for the n-type one. The maximum energy conversion efficiency η of the p- and n-type composites under the ATG produced by imposing a voltage of 4.0 V at an optimum period were 0.22 and 0.23% at ΔT_eff = 50 K, respectively, which are 42 and 43% higher than those at ΔT = 42 K under the STG. These maximum η for a TE composite sandwiched between two Peltier modules, were found to be expressed theoretically in terms of R_P, R_T, R_L, α_P and α, where α_P and α are the resultant Seebeck coefficients of Peltier modules and a TE composite.     

Highly photostable distributed-feedback polymer waveguide blue laser using spirobifluorene derivatives

In this study, we synthesized the new spirobifluorene derivatives; hexylbiphenyl-spirobifluorene (HBP-Spiro) and triphenylamine-spirobifluorene (TPA-Spiro) and demonstrated the operation of a distributed-feedback polymer waveguide blue laser. In addition, we investigated the optical and lasing properties of spirobifluorene derivatives including photostability. The experimental slope efficiency and the energy threshold of a HBP-Spiro-doped waveguide laser were 3.6% and 1.9 μJ, respectively. An operation lifetime of 27,000 shots was obtained for a pump-pulse duration of 1.2 ns and energy of 3.0 μJ at a wavelength of 355 nm.     

Molecular simulation for adsorption of chlorinated hydrocarbon in zeolites

Equilibrium and isosteric heat of adsorption for the system of chloroform and USY-type zeolite were studied. The USY-type zeolite (PQ Co., SiO₂/Al₂O₃=70) was used both as a pure crystalline powder and as granulated particles with binder. Chloroform was reagent grade. The adsorption equilibria were measured using a gravimetric method and were expressed as isotherms. A chromatographic method (i.e. pulse response of chloroform through the USY column with helium carrier) was used to get the initial slope of the isotherms. In the simulation, the GCMC method was used to calculate amounts adsorbed for various conditions. FF parameters were confidently applied. And modified structure model was effective for simulation. This paper was presented at The 5th International Symposium on Separation Technology-Korea and Japan held at Seoul between August 19 and 21, 1999.     

Performance of non-destructive evaluation by diffracted SH ultrasonic waves in predicting degree of fatigue in cyclic bending of ferritic steel

The degree of fatigue in ferritic wrought steel during cyclic bending was determined by analysis of diffracted SH ultrasonic waves with the aid of multiple regression analysis. As the degree of fatigue increases, accompanied by residual stress, the incident waves curve to the interior region with positive stress field owing to the acoustoelastic effect. As a result, the propagation time of the launched waves lengthens, leading to a modulation of the received waveform. Multiple regression analysis for the waveform modulation produces a reliable estimation, with correlation coefficient of 0.948, for the degree of fatigue.     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.     

Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar

A molded carbon/silica composite with high micro- and mesoporosity, as well as a high bulk density, was fabricated by activating a disk-molded precursor made from carbonized rice husk (RH) and beet sugar (BS) at 875 °C in CO₂. The pore structure of the RH- and BS-based carbon/silica composite (RBC) was analysed in relation to the bulk density. An activation time of 2.0 h provided the largest BET specific surface area (1027 m²/g) and total pore volume (0.68 cm³/g) and a low bulk density (0.54 g/cm³). An RBC that was first activated for 1 h was immersed again in BS syrup and then activated in CO₂ for 1 h. This two-step activation process provided both a high bulk density (0.69 g/cm³) and a highly textured structure (BET specific surface area, 943 m²/g; total pore volume, 0.56 cm³/g). The immersion in BS syrup was useful for improving the texture without reducing the bulk density, in comparison to one-step activation for 1.0 h. The suspension of the RBCs was basic because of the residual inorganic compounds of potassium and calcium. However, the basicity of the suspension was alleviated by washing the RBCs with water.     

Parallel processing of steady‐state analysis for a power electronic system by PVM3

It is important to get a steady‐state operation of a power electronic circuit for its design. The shooting method, which is one of the steady‐state analysis methods, solves a boundary value condition which equates initial values to final values after one‐period transient. This paper proposes how to process the analysis in parallel by using a Parallel Virtual Machine (PVM3) system. In particular, the multiple shooting method (MSM) which divides the shooting time into subsections is suitable because it can parallel numerical processes for the divided shooting times by using multiple CPU units independently. This parallel method is applied to converter examples which are processes by PVM3. The computed results are investigated for their convergence and CPU times to check their parallel effects. According to the MSM algorithm, CPU times are reduced almost to one‐fifth by using five computer units from a PVM3 system example. © 2001 Scripta Technica, Electr Eng Jpn, 135(2): 69–76, 2001     

Social modification using implementation of partial agency toward objects

This article considers what kind of partial agency can be implemented for objects to bring about better agencies for interacting with humans. We humans have the ability to inform our fellows about our intentions, internal states, and requirements through verbal means, gestures, attitudes, timings, and other representations. These representations help us to maintain our belief that we are sufficient agents. Robots and virtual agents also mimic these representations; they act as if they have such an agency. However, their agencies are sometimes too excessive compared to their task. This mismatch leads to a high cognitive load being placed on users and consequently leads to breakdowns in interaction; it prevents human-agent interaction from being a modality in certain applications. We have devised an agency with multiple selectable features. We believe that selectable features promote good designs of virtual agents, robots, machinery, and home appliances according to their intended traits. We categorized these agencies into several groups and discuss what elements lead to these features. The article also describes a method of identifying these features in human behavior.