SiO2 thin film deposition on the inner surface of a poly(tetra-fluoroethylene) narrow tube by atmospheric-pressure glow microplasma

SiO₂ thin films were deposited on the inner surfaces of a commercial poly(tetrafluoroethylene) narrow tube with an inner diameter of 0.5 mm using tetraethoxysilane/O₂ feedstock gases and He carrier gas by atmospheric-pressure microplasma-enhanced chemical vapor deposition. A glow microplasma was generated inside the tube by radio frequency (RF) capacitively coupled discharge. X-ray photoelectron spectroscopy spectra showed that the tube inner surface was covered by a SiO₂ thin film. Transparent SiO₂ thin films were obtained with a deposition rate of 230 nm/min at an RF power of 6 W and substrate temperature of 100 °C. The wettability of the SiO₂-coated tube was about 3 times as large as that of an untreated sample tube.     

Effects of neural refractoriness on spatio-temporal variability in spike initiations with Electrical stimulation.

In this paper, the effects of neural refractoriness on action potential (spike) initiations with electrical stimulation are investigated using computer modeling and simulation techniques. The computational model was composed of a myelinated nerve fiber with 50 nodes of Ranvier, each consisting of stochastic sodium and potassium channels, making it possible to represent the fluctuations of spike initiation. A series of two-pulse stimuli was presented by a stimulating electrode above the central (26th) node of Ranvier. The amplitude of the first (masker) pulse stimulus was set such that the masker pulse stimulus evoked spikes on each trial, while that of the second (probe) pulse stimulus was set such that the probe pulse stimulus evoked spikes on a half of trials, threshold values. Then the transmembrane potentials in response to the probe pulse stimulus were recorded at each node (i.e., 1-50 nodes) in order to determine the spike initiation node and time. From the observation of the spike initiation node and time, a spatio-temporal histogram as well as a spatial variability and a temporal variability of spike initiations was generated which allowed us to interpret fluctuations in spike initiation node and time. It was shown that the distribution of spike initiations tended to become greater spatially and longer temporally as the masker-probe intervals (MPIs) of the two-pulse stimuli shortened. It was also shown that the number of activated sodium channels as functions of space and time tended to become smaller due to inactivation of sodium channels and varied spatially and temporally as MPIs shortened. These findings may imply that the stochastic sodium channels during a relative refractory period may contribute to enhancing the fluctuations in spike initiations, and give us an insight into encoding information with electric stimuli to improve the performance of the prosthetic devices, especially cochlear implants.     

A 950-MHz rectifier circuit for sensor network tags with 10-m distance

This paper presents a 950-MHz wireless power transmission system and a high-sensitivity rectifier circuit for ubiquitous sensor network tags. The wireless power transmission offers a battery-life-free sensor tag by recharging the output power of a base station into a secondary battery implemented with the tag. For realizing the system, a high-sensitivity rectifier with dynamic gate-drain biasing has been developed in a 0.3-/spl mu/m CMOS process. The measurement results show that the proposed rectifier can recharge a 1.2-V secondary battery over -14-dBm input RF power at a power conversion efficiency of 1.2%. In the proposed wireless system, this sensitivity corresponds to 10-m distance communication at 4-W output power from a base station.     

Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory

A two-dimensional global higher-order deformation theory is presented for thermal buckling of cross-ply laminated composite and sandwich plates. By using the method of power series expansion of continuous displacement components, a set of fundamental governing equations which can take into account the effects of both transverse shear and normal stresses is derived through the principle of virtual work. Several sets of truncated Mth-order approximate theories are applied to solve the eigenvalue problems of a simply supported multilayered plate. Modal transverse shear and normal stresses can be calculated by integrating the three-dimensional equations of equilibrium in the thickness direction, and satisfying the continuity conditions at the interface between layers and stress boundary conditions at the external surfaces. Numerical results are compared with those of the published three-dimensional layerwise theory in which both in-plane and normal displacements are assumed to be C⁰ continuous in the continuity conditions at the interface between layers. Effects of the difference of displacement continuity conditions between the three-dimensional layerwise theory and the global higher-order theory are clarified in thermal buckling problems of multilayered composite plates.     

Shape from Shading with Interreflections Under a Proximal Light Source: Distortion-Free Copying of an Unfolded Book

We address the problem of recovering the 3D shape of an unfolded book surface from the shading information in a scanner image. This shape-from-shading problem in a real world environment is made difficult by a proximal, moving light source, interreflections, specular reflections, and a nonuniform albedo distribution. Taking all these factors into account, we formulate the problem as an iterative, non-linear optimization problem. Piecewise polynomial models of the 3D shape and albedo distribution are introduced to efficiently and stably compute the shape in practice. Finally, we propose a method to restore the distorted scanner image based on the reconstructed 3D shape. The image restoration experiments for real book surfaces demonstrate that much of the geometric and photometric distortions are removed by our method.     

An electrostatic microactuator using LIGA process for a magnetic head tracking system of hard disk drives

 We demonstrate an electrostatic micro actuator which is fabricated by LIGA process. The actuator is designed for a magnetic head tracking system of hard disk drives (HDDs). The actuator is essential to achieve very high track density of HDDs. We realize the aspect ratio of 125 by the LIGA process using a Si-Au mask. We propose to use PMMA molds both as the mechanical structure and as the insulator between electrodes. We believe there are great opportunity for the LIGA process in making micro actuators of HDDs. Received: 25 August 1997 / Accepted: 24 October 1997     

Legacy system program transformation by Lyee methodology

Based on the comparative review of several approaches to legacy system conversion and revitalization, the Lyee methodology application for the issue is presented to clarify its idea, the associated procedure, and the implemented tools. It could be said that with the tools and manual developed by ICBSM&T, the mechanical transformation of the conventional program to a Lyee-structured one becomes possible as long as the programs are made in a procedure-oriented language. In addition to the program structure conversion, the Lyee methodology permits people to choose any application language in the transformed program. At the same time, quite a new approach related to the system conversion is introduced, in which the chunk of data extracted from an old program is edited to make a new conventional structure program that has a logical sequence instead of a Lyee type of declarative program. These features can be realized through the concept of LyeeBELT, which is a set of word-information about the attributes, formulae, and conditions for an independent data item.

The overall workflow of the legacy program transformation is shown in the following.

A critical part in its implementation is the feasibility study (pre-analysis) stage where necessary information is supposed to be secured, and an appropriate plan and policy about the system to be revitalized in the new system environment should be clarified so as to customize the tools accordingly. If the initial process is completed, the mechanical legacy system conversion will be realized by registering the parameters in the tool, and the reestablishment of business knowledge in the LyeeBELT will be enabled. With the regulated business logic on the LyeeBELT, the program maintenance afterwards becomes drastically simplified and stable without the ‘spaghetti’ problem, so that software evolution can be possible.     

Ultra-high voltage electron microscopy: Past,present, and future

High voltage electron microscopy has shown numerous advantages for the study of natural science, including biology, but it is especially useful in materials science. The most important advantage for materials science is in-situ experiments on detailed processes of the same phenomena that occur in bulk materials. For such in-situ experiments, the specimens should be thicker than a few microns to observe the behavior of lattice effect. The maximum observable thickness of the specimens and other advantages markedly increase with increasing accelerating voltage, and since 1965, two 3 MV instruments have been installed. The present paper is mainly concerned with these 3 MV electron microscopes and their applications to new research fields.     

Macroscopic and microscopic changes in the surface layers of annealed and case-hardened steel rollers due to rolling contact

Measurements of the residual stress and observations of the microstructure at the surface and in the subsurface of rollers were performed during rolling contact fatigue tests of annealed 0.45% carbon steel and case-hardened nickel-chromium steel rollers. Compressive residual stresses in annealed rollers were induced by the rolling contact. With case-hardened rollers they were induced by heat treatment prior to the rolling contact fatigue tests. After the rolling contact fatigue tests the compressive residual stresses on the surface of the annealed rollers and in the subsurface of the case-hardened rollers relaxed; a characteristic substructure was formed by the stress cycles, which caused surface failure. It was confirmed that the microcracks leading to surface failure initiate on the surfaces of annealed rollers and in the subsurface of case-hardened rollers.     

Purification and characterization of a strong fibrinolytic enzyme (nattokinase) in the vegetable cheese natto, a popular soybean fermented food in Japan

A strong fibrinolytic enzyme (nattokinase) was purified from the vegetable cheese natto. Nattokinase was extracted from natto with saline and isolated by sequential use of hydrophobic chromatography on Butyl-Toyopearl, ion-exchange chromatography on CM-Toyopearl, and gel-filtration on Sephadex G-50. The isolated protein gave a single sharp band on SDS-PAGE either before or after reduction. The sequence, as determined by automated Edman degradation of the uncleaved molecule and its enzymatically derived peptide, consisted of a total 275 amino acid residues (M.W = 27,728) and exhibited a high homology with the subtilisins. The purified nattokinase digested not only fibrin but also several synthetic substrates. Among the synthetic substrates, the most sensitive substrate was Suc-Ala-Ala-Pro-Phe-pNA for subtilisin. PMSF inhibited both the fibrinolytic activity and the amidolytic activity. The results indicate that nattokinase is a subtilisin-like serine protease.