Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin

In this study, the correlation between the stress–strain behavior of a carbon fiber-reinforced plastic (CFRP) and the temperature at which the heat-affected zone (HAZ) is generated is investigated. First, CFRP ([?45/45]_2s laminate) specimens were heated at several temperatures to induce thermal damage, i.e. a HAZ. Subsequently, tensile tests were conducted on the specimens with thermal damage. Then, microscopy and X-ray measurements were carried out to discuss the stress–strain responses from a microscopic viewpoint. The results of strain measurement during thermal treatment indicated that the strain increases with increasing temperature. The tensile tests showed that the CFRP specimens subjected to thermal damage during heating at a high temperature fractured in the ductile mode, whereas the fracture mode of the CFRP specimens with low-temperature thermal damage was discontinuous. Microstructure observation using X-ray tomography showed that the debonding between the carbon fibers and the resin matrix induced by heating to above the glass transition temperature was responsible for the continuous fracture mode.     

浸没式光刻的优势和可行性

浸没式光刻通过高折射率的液体充入透镜底部和片子之间的空间使光学系统的数值孔径具有显著的优势。在193nm曝光系统中,水(折射率为1.44)被选作最佳的浸入液体。通过成像模拟,现已证明ArF穴193nm雪浸没式光刻(NA=1.05～1.23)与F2穴157nm雪干法穴NA=0.85～0.93雪光刻具有几乎相同的成像性能。结合流体力学和热模拟结果,讨论了ArF浸没式曝光设备的优势和可行性。     

Sar1 Affects the Localization of Perilipin 2 to Lipid Droplets

Lipid droplets (LDs) are intracellular organelles that are ubiquitous in many types of cells. The LD core consists of triacylglycerols (TGs) surrounded by a phospholipid monolayer and surface proteins such as perilipin 2 (PLIN2). Although TGs accumulate in the phospholipid bilayer of the endoplasmic reticulum (ER) and subsequently nascent LDs buds from ER, the mechanism by which LD proteins are transported to LD particles is not fully understood. Sar1 is a GTPase known as a regulator of coat protein complex Ⅱ (COPⅡ) vesicle budding, and its role in LD formation was investigated in this study. HuH7 human hepatoma cells were infected with adenoviral particles containing genes coding GFP fused with wild-type Sar1 (Sar1 WT) or a GTPase mutant form (Sar1 H79G). When HuH7 cells were treated with oleic acid, Sar1 WT formed a ring-like structure around the LDs. The transient expression of Sar1 did not significantly alter the levels of TG and PLIN2 in the cells. However, the localization of PLIN2 to the LDs decreased in the cells expressing Sar1 H79G. Furthermore, the effects of Sar1 on PLIN2 localization to the LDs were verified by the suppression of endogenous Sar1 using the short hairpin RNA technique. In conclusion, it was found that Sar1 has some roles in the intracellular distribution of PLIN2 to LDs in liver cells.     

Numerical simulation of deflecting flow in a symmetric enlarged channel

Numerical results of three-dimensional separated flow and heat transfer in a rectangular channel with a suddenexpansion are presented in this paper.Numerical simulations of Navier-Stokes and energy equations are carriedout using the finite difference method.The results of three-dimensional calculations are compared with thetwo-dimensional ones,and effects of the aspect ratio of channel upon the flow are shown.The transition fromsymmetric to asymmetric flow appears at lower Reynolds number as increasing the aspect ratio.The details oflocal heat transfer characteristics in two different separated flow regions on two downstream walls are clarified.Two-dimensionality of the flow and heat transfer almost disappears for the aspect ratio considered.     

Hematopoietic–Mesenchymal Signals Regulate the Properties of Mesenchymal Stem Cells

It is well known that the properties of hematopoietic stem/progenitor cells (HSCs), such as their self-renewal ability and multipotency, are maintained through interactions with mesenchymal stem/stromal cells (MSCs). MSCs are rare cells that are present in the bone marrow and are useful for clinical applications due to their functional ability. To obtain the necessary number of cells, MSCs must be cultured to expand, but this causes a remarkable decrease in stem cell properties, such as multipotency and proliferation ability. In this study, we show that the c-Mpl signal, which is related to the maintenance of hematopoietic stem cells, has an important effect on the proliferation and differentiation ability of MSCs. Utilizing a co-culture system comprising MSCs and HSCs, it is suggested that signaling from hematopoietic cells to MSCs supports cell proliferation. Interestingly, the enhanced proliferation ability of the HSCs was decreased in c-Mpl knock-out HSCs (c-Mpl-KO). In addition, the MSCs co-cultured with c-Mpl-KO HSCs had reduced MSC marker expression (PDGFRa and Sca-1) compared to the MSCs co-cultured with c-Mpl-wild-type HSCs. These results suggest that a hematopoietic–mesenchymal signal exists, and that the state of the HSCs is important for the stability of MSC properties.     

Behavior of a mechanically anchored waterproofing membrane system under wind suction and uniform Pressure

A pressure and wind tunnel test was conducted to obtain the basic data for wind resistance design of a mechanically anchored waterproofing membrane system. The test specimen was a flat roof with the following dimensions: 2.4 m in width, 3 m in length and 0.29 m in height. The waterproofing material was polyvinyl chloride sheet reinforced with polyester fiber (PVC sheets). In the pressure test, because the applied pressure was equivalent to the pressure on the entire surface area of the roof, the billowing heights of the PVC sheet around the fastener had almost the same maximum values; therefore, the axial force at the fastener was also similar to the pressure induced by a compressor, and no lateral forces were measured. On the other hand, in the wind tunnel test, the strain of the PVC sheet around the fastener at windward side was larger than that of the leeward side. The lateral force was 70% of the axial force at a mean wind speed of 38.6 m/s. Therefore, it was clear that the characteristics of the mechanically anchored waterproofing membrane system in the pressure test and the wind tunnel test were different.     

Effects of Sampling Tube Geometry on Soft Clayey Sample Quality Evaluated by Nondestructive Methods

Sample disturbance caused by difference in sampling tube geometry was evaluated by two nondestructive methods: the measurement of the residual effective stress (p_r') by ceramic disc; and the use of the bender element to ascertain the shear wave velocity (V_s), and thus the maximum shear modulus (G_BE). Samples were measured under atmosphere, i.e., not under confined stress conditions. The soil samples were obtained from two sources: reconstituted Kasaoka clay prepared in the laboratory, and at the test site at Takuhoku, Hokkaido, Japan. Samplers with different geometrical designs, referring to the Japanese standard stationary piston sampler, were used for the model ground and field sampling. The geometrical effects of the sampling tube, for example, the thickness of the tube wall, the edge angle, and the existence of a piston were carefully examined. The quality of the samples taken with different samplers was evaluated by p_r' and G_BE, values which were normalized by the in situ vertical effective stress (σ'_vo) and G_f measured by the seismic cone test in the field. It was found from these studies that p_r'/σ'_vo and G_BE/G_f vary considerably due to the geometry of the sampler, with the edge angle of sampling tubes being the most important feature in obtaining high quality samples. The wall thickness, and thus, the area ratio of the sampler is not critical to the sample quality if the edge angle is sharp enough. The existence of the piston does not significantly influence the sample quality in field samples. Furthermore, the correlation between G_BE and p_r' was also investigated, and it was found that the two parameters are strongly dependent.     

Application of step‐response test for evaluation of uncertainty of standard measuring system for lightning‐impulse high voltage

In evaluating the uncertainty of the standard measuring system for lightning‐impulse high voltages, which is composed of a standard voltage divider, a digital recorder, and calibrators, step‐response tests of the standard voltage divider may be useful. In this paper, a convolution algorithm is employed to calculate the output impulse voltage waveforms from measured step‐response waveforms. The uncertainties of peak‐value measurement due to the influence of the nominal epoch, uncertainty of the peak‐value measurement due to dispersion of the AC scale factor, and uncertainty of the virtual front‐time measurement due to long‐term stability are evaluated. Furthermore, the error of the virtual front time of the output waveforms is discussed. The front part of the step‐response waveform, t≤ T₃₀%, does not influence the error of the virtual front time. Therefore, for the standard voltage divider, the step‐response parameters, that is, the experimental response time, partial response time, settling time, and overshoot, have almost nothing to do with the error of the virtual front time. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 24–32, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21279     

Navigation behavior based on self-organized spatial representation in hierarchical recurrent neural network

ABSTRACT

A cognitive map is an internal model of the external world and contains the spatial representation of the surrounding environment. The existence of the cognitive map was first identified in rats; rats can navigate to their desired destination using cognitive maps while dealing with environmental uncertainty. We performed a mobile robot navigation experiment where obstacles were randomly placed using hierarchical recurrent neural network (HRNN) with multiple timescales. The HRNN was trained to navigate the mobile robot to the destination indicated by a snapshot image. After the training, the HRNN was able to successfully avoid the obstacles and navigate to the destination from any location in the environment. Analysis of the internal states of the HRNN showed that the module with fast timescale handles obstacle avoidance and the one with slow timescale has spatial representation corresponding to the spatial position of the destination. Moreover, in the experiment wherein the novel path appeared, the trained HRNN performed shortcut behavior. The shortcut behavior shows that the HRNN performed navigation using the self-organized spatial representation in the slow recurrent neural network. This indicates that training of goal-oriented navigation, i.e. the navigation motivated by a snapshot image of the destination results in the self-organization of cognitive map-like representation.     

The structure solution of the F-type i-ZnMgHf from the X-ray diffraction

ABSTRACT

We report a successful growth of the ZnMgHf F-type icosahedral quasicrystal in the form of faceted single grains. By varying the heat treatment parameters we were able to obtain single crystals with a quality suitable for a single crystal X-ray diffraction which was conducted in a synchrotron facility. Ab initio structure solution by a charge flipping algorithm manifests the existence of two types of Bergman clusters. Clusters are differentiated by the preferential occupation of the high-symmetry positions by hafnium in a rhombic triacontahedron, being the outer shell of the atomic cluster.

This paper is part of a Thematic Issue on The Crystallographic Aspects of Metallic Alloys.