WATER MIST FLOW IN A SUPERCONDUCTING MAGNET INCLINED AT VARIOUS ANGLES

Water mist (diamagnetic) flow in a superconducting magnet of 10 T at various angles is studied experimentally and numerically. Water mist is produced by ultrasonic atomizers and fed into a cylindrical Plexiglas pipe (inner diameter, 90 mm) placed in a bore space of an inclined superconducting magnet. The water mist is found to stop at some locations in the magnet at inclined angles ψ ≤ π/6. At ψ ≥ π/4, the amount of mist flowing out of the other opening of the pipe increases with an increase in inclined angle. In the computation of this phenomenon, water mist is simulated with 1000 water droplets of 3 μm diameter. Brownian motion is considered and the Langevin equation is solved. The numerical results show that at ψ ≤ π/6, most of the water droplets accumulate above the magnetic coil. However, at ψ ≥ π/4, with an increase in inclined angle, the number of water droplets passing through the magnetic coil increases.     

Effect of cation structure on the electrochemical and thermal properties of ion conductive polymers obtained from polymerizable ionic liquids

Several onium cations having vinyl group formed ionic liquids after coupling with bis(trifluoromethanesulfonyl)imide. These monomers were polymerized, and the relation between onium cation structure and properties of thus polymerized ionic liquids was investigated. The polymerized ionic liquid having ethylimiadzolium cation unit showed the highest ionic conductivity of around 10⁻⁴ S cm⁻¹ at 30 °C among the obtained polymers reflecting the lowest glass transition temperature of −59 °C. These polymers were thermally stable and their decomposition temperatures were about 350 °C. The ionic conductivity of the polymerized ionic liquids decreased by both the addition of lithium bis(trifluoromethanesulfonyl)imide and the polymerization in the presence of cross-linker. However, the polymerized ionic liquid having 1-methylpiperidinium cation structure showed good lithium ion transference number of 0.43 at room temperature.     

Barium Carbonate Phase on the Surfaces of Barium Titanate Particles and in Situ Transmission Electron Microscopy Observation of Its Decomposition

A BaCO₃ phase is found on the surfaces of hydrothermally synthesized BaTiO₃ particles; it occurs as aggregates or small protuberances. A small proportion of the phase decomposes to BaO crystallites when heated by a convergent electron beam in a transmission electron microscope. The BaO and BaCO₃ crystallites disappear when they are irradiated successively by the convergent electron beam. The BaO crystallites and the BaCO₃ phase sublimate and/or react with BaTiO₃ crystals whose surface layers are deficient in Ba²⁺ ions.     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Ultra-high pressure sterilization of powdery food stuff—a new application of a roller compactor

A new non-heating technique was developed for the sterilization of food stuff. Applying a roller compactor, ultra-high pressure sterilization has experimentally demonstrated its ability to sterilize dry powders, such as corn flour and Chinese herbs, with little quality deterioration. Also, the degree of food sterilization was found correlated well with the linear press forces between the rollers, roller gaps, and number of compaction passes. In comparison to the conventional high pressure sterilization technique, the new dry continuous processing method has the advantage of lower investment cost and is more versatile for sterilizing various food powders.     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. III. Adhesive Joint Strengths of Grafted Power Feed Copolymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. Power feed copolymer had a very broad glass transition temperature compared with random copolymer, even if grafting and/or crosslinking were introduced to the system. This tendency was almost the same as the non-grafted power feed copolymer where only low molecular weight surfactant was used.

Adhesive joint strengths of power feed copolymers were evaluated compared with random copolymers. In the case of usual linear power feed copolymer, the adhesive joint strengths were not higher than those of random copolymer, which was considered to be due to the lower film strengths of the power feed copolymer. Power feed copolymer having grafting showed slightly higher adhesive joint strengths over a wide range of temperatures than random copolymer. When crosslinking was introduced to the system, power feed copolymer showed much higher adhesive joint strengths over a wide temperature range.     

Structural analysis of cellulose triacetate polymorphs by two-dimensional solid-state C-C and H-C correlation NMR spectroscopies

For the elucidation of the crystal structures of the two crystalline allomorphs of cellulose triacetate (CTA), namely CTA I and CTA II, two-dimensional (2D) solid-state through-bond ¹³C-¹³C and ¹H-¹³C correlations NMR techniques applied to the two crystalline allomorphs of CTA. As a result, the ¹³C and ¹H chemical shifts of the glucopyranose ring of CTA I and CTA II were completely assigned by the 2D NMR spectra of these allomorphs. On the 2D ¹³C-¹³C correlation spectrum of CTA II, two sets of the ¹³C-¹³C correlations from C1 to C6 were observed. This indicated that the CP/MAS ¹³C NMR spectrum of CTA II can be characterized by its overlapping of the ¹³C subspectra of two kinds of 2,3,6-triacetyl-anhydroglucopyranose units and that there are two magnetically non-equivalent sites in the unit cell of CTA II. In the case of CTA I, the numbers of respective ¹³C and ¹H shifts of CTA I agreed with the those of the glucopyranose residue in the allomorph, strongly suggesting that the asymmetric unit of CTA I is only one glucose residue. In addition, conformational differences in the exocyclic C5-C6 bonds between CTA I and CTA II were strongly suggested by the notable differences in the ¹H and ¹³C chemical shifts at the C6 sites of these allomorphs.     

Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Reaction Pathways in the Synthesis of Photorefractive gamma-Bi12MO20 (M = Si, Ge, or Ti)

Reaction pathways in the synthesis of three photorefractive silicates—γ-Bi₁₂ SiO₂₀ (BSO), γ-Bi₁₂ GeO₂₀ (BGO), and gamma-Bi₁₂ TiO₂₀ (BTO)—were systematically investigated. The main results were as follows: (i) all the reactions of the form 6Bi₂O₃+ MO₂→> γ-Bi₁₂ MO₂₀ (SR1 for M = Si, SR2 for M = Ge, SR3 for M = Ti) in the solid state seemed to be diffusion-controlled processes and were affected by both temperature and time, where the reaction temperature increases in the order SR1 < SR2 < SR3; (ii) the metastable phases Bi₂ SiO₅ (tetragonal) in reaction SR1, Bi₂ GeO₅ (orthorhombic) in reaction SR2, Bi₄ Ti₃ O₁₂ (orthorhombic) in reaction SR3 may be formed and seemed to greatly accelerate the above-mentioned solid-state reaction processes; and (iii) for a continuous heating process, pure γ-Bi₁₂ SiO₂₀ and γ-Bi₁₂ GeO₂₀ could be produced before melting, whereas pure γ-Bi₁₂ TiO₂0 could not be produced, even if all the mixed phases had melted.